Ortis 7-Day Programmable In-Wall Timer Switch

1. Důležité bezpečnostní informace

VAROVÁNÍ: Risk of electric shock. Improper installation can lead to serious injury or death. Always turn off power at the circuit breaker before installing or servicing this device. Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.

• This device requires a Neutrální drát for operation. Verify the presence of a neutral wire (typically white) in your electrical box before installation.
• Do not exceed the maximum load rating of 1800W or 3/4 HP at 120V.
• Ujistěte se, že všechna vodičová spojení jsou bezpečná a řádně izolovaná.
• Pouze pro vnitřní použití.

2. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077)
• Drátěné matice
• Montážní šrouby
• Uživatelská příručka

3. Specifikace

4. Instalace

Než začnete: Turn off power at the circuit breaker for the switch location. Confirm power is off using a voltage tester.

Schéma zapojení

Image: Wiring diagram for the Ortis timer switch. The diagram illustrates connecting the BLACK wire to the LINE, the BLUE wire to the LOAD, and the WHITE wire to the NEUTRAL. Wire nuts are used for secure connections.

Instalace krok za krokem:

1. Vypnout napájení: Locate the circuit breaker controlling the switch you are replacing and turn it OFF.
2. Demontáž starého spínače: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
3. Identifikace vodičů: Identify the Line (incoming power), Load (to light/appliance), and Neutral wires in your electrical box. A neutral wire (usually white) is required for this timer switch. If you do not have a neutral wire, this switch is not compatible.
4. Připojit dráty: Using the provided wire nuts, connect the wires from the Ortis timer switch to your household wiring as follows:
   • Připojte ČERNÝ vodič od časovače k ČÁRA (hot) wire from your electrical box.
   • Připojte MODRÝ vodič od časovače k ZATÍŽENÍ drát (k světlu/spotřebiči).
   • Připojte BÍLÝ vodič od časovače k NEUTRÁLNÍ wire from your electrical box.
5. Montážní spínač: Carefully fold the wires into the electrical box and secure the timer switch with the provided mounting screws.
6. Instalace nástěnné desky: Attach your standard wall plate (not included) over the timer switch.
7. Obnovit napájení: Znovu zapněte napájení jističem.

5. Ovládací prvky Overview

Obrázek: Podrobný view of the Ortis timer switch interface. The blue backlit LCD screen displays time, day, and program status. Buttons for increasing/dekreasing values, changing modes, and manual on/off control are clearly indicated. An LED illuminates when the load is active.

The Ortis timer switch features an intuitive three-button interface and a blue backlit LCD screen for easy operation and visibility in low light conditions.

• LCD obrazovka: Displays current time, day, operating mode, load state, and program information.
• Increase Key: Used to adjust time, program values, or navigate menus upwards.
• Decrease Key: Used to adjust time, program values, or navigate menus downwards.
• Tlačítko režimu: Cycles through different operating modes and settings menus.
• Tlačítko zapnutí/vypnutí: Manually turns the connected load ON or OFF, or confirms selections.
• LED indikátor: Illuminates when the connected load (e.g., light, fan) is ON.

6. Počáteční nastavení

After installation and restoring power, the device will require initial setup.

Setting Current Time and Date:

1. Stiskněte tlačítko Režim key until the time setting appears.
2. Použijte Zvýšení a Pokles keys to set the current hour, then press Zapnuto/Vypnuto potvrdit.
3. Opakujte pro minuty a den v týdnu.

Setting Latitude and Longitude (for Sunrise/Sunset):

This feature allows the timer to automatically adjust ON/OFF times based on local sunrise and sunset.

1. Stiskněte tlačítko Režim key until the latitude/longitude setting appears.
2. Použijte Zvýšení a Pokles keys to input your local latitude and longitude values. A chart of major cities may be provided in the full manual for reference, or you can look up your specific coordinates online.
3. Stiskněte Zapnuto/Vypnuto to confirm. The display will show the calculated sunrise/sunset times for verification.

Úprava letního času (DST):

The timer can be configured to automatically adjust for Daylight Saving Time. Refer to the full manual for specific steps to enable or disable this feature.

7. Provozní režimy

The Ortis timer switch offers three primary operating modes:

7.1 Automatic Mode (Sunrise/Sunset & Fixed Schedules)

Image: Illustration of the timer switch's automatic control, showing lights turning off at sunrise and on at sunset. The blue backlit LCD screen is visible, indicating clear readability in the dark.

In Automatic Mode, the timer operates based on programmed schedules, including sunrise/sunset times or custom ON/OFF times.

• Sunrise/Sunset Control: Once latitude and longitude are set, the timer automatically calculates and adjusts ON/OFF times daily based on local sunrise and sunset. An offset can be applied to turn lights on/off before or after these times.
• Fixed Schedules: Up to 7 custom ON/OFF programs can be set for specific times and days of the week.

7.2 Náhodný režim

Image: A visual representation of the timer's random mode, designed to enhance home security by simulating occupancy. Lights turn on and off at varied times, creating a 'lived-in' appearance.

Random Mode varies the ON/OFF times of your lights or appliances slightly to simulate occupancy, enhancing home security when you are away.

• Chcete-li aktivovat náhodný režim, stiskněte tlačítko Režim key until "Random" is displayed.
• The timer will then randomly adjust your programmed ON/OFF times within a certain window.

7.3 Ruční režim

Manual Mode allows you to override any programmed schedules and turn the connected load ON or OFF instantly.

• Stiskněte tlačítko Zapnuto/Vypnuto key to toggle the connected load between ON and OFF.
• The timer will remain in the manually set state until the next programmed event or until Manual Mode is exited.

8. Programové plány

The Ortis timer switch allows you to set up to 7 distinct ON/OFF programs. Programs can be set for specific days, weekdays, weekends, or all 7 days.

Steps to Program a Schedule:

1. Stiskněte tlačítko Režim key repeatedly until "P01" (Program 1) appears on the screen.
2. Použijte Zvýšení a Pokles keys to select the desired ON time (hour and minute), then press Zapnuto/Vypnuto potvrdit.
3. Next, select the days of the week for this ON event. You can choose individual days, groups (e.g., Mon-Fri, Sat-Sun), or all 7 days. Press Zapnuto/Vypnuto potvrdit.
4. Repeat the process to set the corresponding OFF time and days for Program 1.
5. To set additional programs (P02-P07), press the Režim key to advance to the next program number and repeat steps 2-4.
6. Jakmile jsou všechny programy nastaveny, stiskněte tlačítko Režim key until the current time display returns, indicating the timer is ready to operate.

Poznámka: All settings are saved permanently and will resume operation even after a power outage due to the internal battery backup.

9. Široká kompatibilita

Image: A collage demonstrating the wide range of devices compatible with the Ortis timer switch. Examples include LED, CFL, incandescent, and halogen lights, as well as ceiling fans, fountain pumps, pool pumps, and sprinklers.

The Ortis timer switch is compatible with various lighting types and appliances:

• LED, CFL, Incandescent, Halogen, and Fluorescent Lights
• Stropní ventilátory
• Koupelnové výfukové ventilátory
• Fontánová čerpadla
• Bazénová čerpadla
• Sprinklery

10. Údržba

The Ortis timer switch requires minimal maintenance.

• Čištění: Otřete povrch měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Žádné díly opravitelné uživatelem: Do not attempt to open or repair the device. Refer to qualified personnel for any issues beyond basic troubleshooting.

11. Řešení problémů

12. Záruka a podpora

The Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077) comes with a 2letá záruka výrobce.

For technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official Ortis webmísto.