How do I reset the factory settings on the VARUN X-Plorer electric bike after the display settings were accidentally changed?

The provided manual for the VARUN X-Plorer does not explicitly list a "factory reset" button combination. However, based on the behavior described (holding the Up and Down buttons), you likely entered the P-Settings (Parameter Settings) menu, which controls speed limits, wheel size, and voltage.To attempt to restore or fix the settings, try the following steps:Access the Menu: With the display powered on, press and hold the Up and Down buttons simultaneously for a few seconds to re-enter the settings menu.Check Pedal Assist (PAS) Level: Ensure your bike is not stuck in "Level 0." Use the Up button to increase the assist level; the motor and throttle often will not engage or will have very low power at Level 0 or 1.Check Speed Limit (P-Setting): While in the menu, look for a setting (often P08 on many e-bike displays) that represents the speed limit. If this was accidentally set to a very low number, the throttle will barely move the bike.Standard Reset Attempt: On many similar LCD displays used by VARUN, holding the Power and Down buttons (or sometimes Up and Down) for 10+ seconds while in the settings menu may trigger a reset, though this varies by firmware version.Caution: Because the manual does not provide a specific P-setting map, changing values randomly can cause further issues. If the bike remains unresponsive, it is highly recommended to contact VARUN Customer Support via their official Amazon store or the contact information provided with your purchase to get the specific default values for the X-Plorer model.

VARUN X-Plorer

VARUN Xplorer Electric Bike User Manual

Model: X-Plorer | Brand: VARUN

1. Úvod

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your VARUN Xplorer Electric Bike. Please read it thoroughly before your first ride and retain it for future reference.

VARUN Xplorer Electric Bike with accessories

Image 1: The VARUN Xplorer Electric Bike, showcasinjeho design a dodávané příslušenství.

2. Bezpečnostní informace

Always prioritize safety when operating your electric bike. Failure to follow safety guidelines can result in serious injury or damage to the bike.

Vždy noste helmu a vhodné bezpečnostní vybavení.
Seznamte se s místními dopravními předpisy a předpisy pro elektrokola.
Perform a pre-ride inspection before each use, checking brakes, tires, battery, and all connections.
Nejezděte pod vlivem alkoholu nebo drog.
Vyhněte se jízdě za nepříznivého počasí nebo na kluzkém povrchu.
Před jízdou se ujistěte, že je baterie bezpečně zajištěna na svém místě.

3. Obsah balení

Po vybalení zkontrolujte, zda jsou přítomny všechny položky:

1 x VARUN Xplorer Electric Bike
1 x Uživatelská příručka (tento dokument)
1x Nabíječka
1 x Sada nářadí

4. Nastavení a montáž

Your VARUN Xplorer Electric Bike arrives approximately 90% pre-assembled. Follow these steps for final assembly:

4.1. Vybalení a první kontrola

Carefully remove the bike from its packaging. Remove all protective film and packaging materials. Confirm all listed components are present.

Video 1: VARUN S20-1 Installation Video. This video demonstrates the unpacking and initial assembly steps for the VARUN electric bike.

4.2. Handlebar and Seat Installation

Install the handlebar and adjust its height for comfortable riding. Secure the seat post into the frame and adjust the seat height.

4.3. Front Wheel, Mudguards, and Headlight Installation

Attach the front wheel, ensuring the brake rotor is correctly aligned with the caliper. Install the front mudguard and headlight. Secure all fasteners.

VARUN Xplorer Electric Bike front wheel and suspension

Image 2: Close-up of the front wheel, showing the fat tire, disc brake, and front suspension system.

4.4. Instalace pedálů

Identify the left (L) and right (R) pedals. Thread them into the crank arms and tighten securely with a wrench to prevent loosening during operation.

4.5. Rear Reflector Installation

Attach the rear reflector to the designated mounting point on the rear rack or fender. Ensure it is visible and securely fastened.

5. Návod k obsluze

5.1. Instalace a vyjmutí baterie

To install the battery, align it with the frame compartment and slide it in until it clicks into place. Use the key to lock it. To remove, unlock with the key and slide the battery out. Ensure the key is in the "power-on" state for operation and removed for security when parked.

5.2. Zapnutí/vypnutí a zobrazení

Press and hold the power button on the LCD display to turn the bike on or off. The display shows speed, battery level, mileage, and pedal-assist level.

VARUN Xplorer Electric Bike LCD display and controls

Image 3: Close-up of the handlebar, showing the SHIMANO gear controller, accelerator, and upgraded LCD display with mileage, speed, battery, and mode indicators.

5.3. Režimy jízdy

The VARUN Xplorer offers multiple riding modes:

Čistě elektrický režim: Use the throttle for motor-only propulsion.
Režim pedálového asistenta: The motor provides assistance as you pedal. Adjust assist levels via the display.
Manuální režim: Jezděte jako na tradičním kole bez asistence motoru.
Režim plavby: Maintain a constant speed without continuous throttle input (refer to display for activation).

Video 2: Demonstration of the electric bike's speed in PAS (Pedal Assist System) mode, reaching up to 36 MPH.

5.4. Řazení rychlostních stupňů

Utilize the 7-speed SHIMANO gear system for optimal pedaling efficiency across various terrains. Shift gears smoothly while pedaling.

VARUN Xplorer Electric Bike 750W motor and fat tires

Image 4: Illustration of the 750W peak brushless motor, highlighting its power and capability for inclines.

5.5. All-Terrain Riding

The 20"x4" puncture-resistant fat tires and dual suspension system provide superior traction and comfort on various surfaces, including sand, gravel, snow, and rugged trails.

Video 3: VARUN S20-1 Riding Show Video. This video demonstrates the bike's performance and stability across different terrains.

6. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho elektrokola.

pneumatiky: Check tire pressure regularly. The 20"x4" fat tires are puncture-resistant but should be inspected for wear and damage.
brzdy: Inspect dual disc brakes for wear on pads and rotors. Ensure brake levers are responsive.
Péče o baterie: Charge the 48V 13AH battery fully after each ride. Avoid complete discharge. Store in a cool, dry place. The built-in BMS protection system helps extend battery life.
Řetěz: Udržujte řetěz čistý a promazaný pro plynulé řazení a prevenci koroze.
Rám: Vyčistěte hliníkový rám pomocíamp hadříkem. Vyhněte se mytí elektrických součástí tlakovou vodou.

VARUN Xplorer Electric Bike with dual suspension and fat tires

Image 5: The VARUN Xplorer Electric Bike demonstrating its full suspension system and fat tires on rough terrain, emphasizing comfort and shock absorption.

Image 6: Close-up of the advanced dual disc braking system, ensuring reliable stopping power.

7. Řešení problémů

If you encounter issues, refer to this section before contacting support.

Problém	Možná příčina	Řešení
Kolo se nezapne	Baterie není nabitá nebo není správně nainstalovaná.	Ujistěte se, že je baterie plně nabitá a bezpečně zajištěná. Zkontrolujte připojení.
Motor nepomáhá	Úroveň podpory šlapání je příliš nízká nebo není sešlápnutý plyn.	Increase pedal-assist level on the display. Ensure throttle is fully engaged if using pure electric mode.
Brzdy se zdají slabé	Opotřebované brzdové destičky nebo uvolněné brzdové lanka.	Zkontrolujte brzdové destičky, zda nejsou opotřebované, a v případě potřeby je vyměňte. Upravte napnutí brzdového lanka.

8. Specifikace

Typ kola: Elektrické kolo
Věkové rozmezí: Dospělý
Značka: VARUN
Počet rychlostí: 7
Barva: Černý
Velikost kola: 20 palce
Materiál rámu: Hliník
Typ odpružení: Dvojí
Motor: 500W (špičkový 750W)
Baterie: 48V 13AH (Removable)
Styl brzdy: Disk
Název modelu: X-Plorer

9. Záruka a podpora

The VARUN Xplorer Electric Bike comes with a Jednoletá záruka. For any questions, technical assistance, or warranty claims, please contact VARUN customer support. Refer to the contact information provided with your purchase or visit the official VARUN webmísto.

Official VARUN Store: VARUN Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.