UltraPro 800 Series Z-Wave Dimmer

Zavedení

This manual provides instructions for the installation, operation, and troubleshooting of your UltraPro 800 Series Z-Wave Dimmer (Model 76602). This in-wall smart dimmer is designed to control lighting through Z-Wave compatible hubs, offering both manual and smart home control capabilities.

The dimmer supports Z-Wave Plus Long Range technology for extended wireless communication and is compatible with various Z-Wave certified hubs, including those that integrate with Amazon Alexa and Google Assistant for voice control.

Bezpečnostní informace

• RIZIKO ÚRAZU ELEKTRICKÝM PROUDEM: Electricity can cause personal injury and property damage if handled improperly. Always turn OFF power at the circuit breaker or fuse box before installation.
• RIZIKO POŽÁRU: Do not use to control an appliance that could present a hazardous condition when operated remotely or unattended.
• RIZIKO PŘEHŘÁTÍ: Do not exceed the specified electrical ratings.
• Instalujte v souladu se všemi národními a místními elektrickými předpisy.
• Pokud si nejste jisti jakoukoli částí těchto pokynů, obraťte se na kvalifikovaného elektrikáře.
• Pouze pro vnitřní použití.

Vlastnosti

• Z-Wave Plus Long Range: Extends wireless range up to 1,300ft (400m) with compatible hubs. Backward compatible with Z-Wave Classic for up to 150ft range.
• Hlasové ovládání: Compatible with Amazon Alexa and Google Assistant when connected to a Z-Wave certified hub (e.g., SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Ezlo).
• QuickFit Design: Reduced housing depth (20% less) and elimination of heat tabs for easier installation in crowded electrical boxes.
• Multi-Switch Dimming: Supports single-pole or multi-switch configurations. Can be used with up to four UltraPro add-on switches for full dimming control from multiple locations, or one standard three-way switch for ON/OFF control.
• Customizable LED Indicator: Features eight colors and four operation modes for personalization.
• Direct 3-Way Wiring: Allows for 3-way setup without an add-on switch, provided a hot line is present at both switch locations.

Obrázek: Overview of UltraPro Z-Wave Dimmer features including Z-Wave Plus LR, mobile/voice control, dimming, and scheduling.

Instalace (Nastavení)

Before beginning, ensure the power is OFF at the circuit breaker. This device is designed for use with permanently installed fixtures only. Do not use with portable lamps.

Požadavky na kabeláž:

• Nutný neutrální vodič.
• Ground wire required.
• For 3-way installations without an add-on switch, a hot line must be present at both switch locations. If this is not the case, an UltraPro add-on switch is required for multi-location control.
• Color-coded flying leads are provided for wiring. Use wire nuts to secure connections.

Kroky instalace:

1. Turn OFF Power: Locate the circuit breaker controlling the switch you are replacing and turn it OFF. Verify power is off using a voltage tester.
2. Demontáž starého spínače: Carefully remove the existing wall plate and switch. Disconnect the wires from the old switch.
3. Identifikace vodičů: Identify the LINE (hot), LOAD, NEUTRAL, and GROUND wires. If you are unsure, consult a qualified electrician.
4. Wire the Dimmer: Connect the UltraPro dimmer wires to your home's wiring using wire nuts according to the diagram below.
   • Black wire (LINE) to the incoming hot wire.
   • Red wire (LOAD) to the wire going to the light fixture.
   • White wire (NEUTRAL) to the neutral bundle.
   • Green wire (GROUND) to the bare copper or green ground wire.
   • Yellow wire (TRAVELER) for 3-way applications (connect to the traveler wire from the other switch location).
5. Namontujte stmívač: Carefully tuck all wires into the electrical box. Secure the dimmer to the electrical box using the provided screws.
6. Instalace nástěnné desky: Attach the new wall plate (sold separately) over the dimmer.
7. Obnovit napájení: Zapněte napájení na jističi.

Schéma zapojení:

Obrázek: Podrobný view of the UltraPro Z-Wave Dimmer showing wiring leads, dimensions (1.69in W x 4.14in H x 1.13in D housing depth), and Z-Wave DSK.

The QuickFit design reduces housing depth to 1.13 inches, making it easier to fit into standard electrical boxes. The dimmer uses flying leads instead of screw terminals, which may require additional wire nuts for connections.

Operace

Ruční ovládání:

• ON/OFF: Press the top of the rocker switch to turn the connected light ON. Press the bottom of the rocker switch to turn the connected light OFF.
• Stmívání: Press and hold the top of the rocker switch to increase brightness. Press and hold the bottom of the rocker switch to decrease brightness. Release the switch when the desired brightness level is reached.

Inteligentní ovládání:

Once successfully paired with a Z-Wave hub, you can control the dimmer remotely via your hub's app, set schedules, and integrate with voice assistants like Amazon Alexa and Google Home.

Image: A family interacting with smart home devices, demonstrating voice control functionality with "Dim lights to 75%" via Alexa and Google Home.

Image: A man using a smartphone to schedule and control lights remotely, with a house illuminated in the background, illustrating smart home capabilities.

Začlenění/vyloučení Z-Wave

Follow your Z-Wave hub's instructions for adding or removing devices. The process typically involves putting your hub into inclusion/exclusion mode and then performing an action on the dimmer.

To Add (Include) the Dimmer:

1. Place your Z-Wave controller into inclusion mode.
2. Press the top or bottom of the dimmer's rocker switch once. The LED indicator will flash to confirm inclusion mode.
3. The controller will confirm successful inclusion.

To Remove (Exclude) the Dimmer:

1. Place your Z-Wave controller into exclusion mode.
2. Press the top or bottom of the dimmer's rocker switch once. The LED indicator will flash to confirm exclusion mode.
3. The controller will confirm successful exclusion.

Obrázek: Přední strana view of the UltraPro Z-Wave Dimmer, highlighting the Z-Wave DSK (Device Specific Key) and PIN for secure inclusion.

Pokročilé funkce

LED Indicator Customization:

The dimmer features a customizable LED indicator. Refer to your Z-Wave hub's documentation or the UltraPro support website for specific instructions on how to change the LED color (eight options) and operation mode (four options).

Multi-Switch Dimming:

For multi-location control with full dimming functionality, pair the 76602 dimmer with up to four UltraPro add-on switches. For basic ON/OFF control from a second location, a standard three-way switch can be used. Ensure proper wiring as described in the installation section.

Údržba

The UltraPro Z-Wave Dimmer requires minimal maintenance. To clean, gently wipe the surface with a soft, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.

Odstraňování problémů

• Light does not turn ON/OFF or dim:
  • Ujistěte se, že je jistič zapnutý.
  • Check all wire connections for security and proper alignment according to the wiring diagram.
  • Verify the bulb is functional and compatible with dimmers.
  • Ensure the dimmer is not overloaded (check wattage specifikace).
• Dimmer cannot be included/excluded from Z-Wave network:
  • Ensure your Z-Wave hub is in inclusion/exclusion mode.
  • Try moving the dimmer closer to the hub during the pairing process.
  • Perform a factory reset on the dimmer (refer to UltraPro support for specific steps, usually involves a sequence of button presses).
  • If previously included, try excluding it first, then re-including.
• 3-Way setup not working as expected:
  • Confirm that a hot line is present at both switch locations if attempting a direct 3-way setup without an add-on switch.
  • Verify traveler wire connections are correct.
  • If using an add-on switch, ensure it is a compatible UltraPro add-on switch and wired correctly.

Specifikace

Záruka a podpora

UltraPro products are backed by a limited warranty. For detailed warranty information, product support, or to contact customer service, please visit the official UltraPro webwebu nebo se podívejte na kontaktní informace uvedené při nákupu.

Online podpora: www.ultrapro.com/support (Napřampodkaz, skutečný odkaz nebyl ve vstupu uveden)

Výrobce: Jasco Products Company, LLC