Ransanx Stepper Motor Controller ZK-SMC05 User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of the Ransanx Stepper Motor Controller, model ZK-SMC05. This controller is designed for precise control of Nema 17, Nema 23, and Nema 34 stepper motors, offering a wide range of motion modes and industrial connectivity options. Please read this manual thoroughly before use to ensure proper and safe operation.

2. Bezpečnostní opatření

Napájení: Zajistěte napájení objtagNapětí e je v rozsahu 12–24 V DC. Nesprávné napětí.tage může poškodit zařízení.
Zapojení: All wiring should be performed by qualified personnel. Ensure power is disconnected before making any connections.
Prostředí: Operate the controller within the specified operating temperature range of -5°C to +60°C (non-condensing). Avoid exposure to moisture, dust, and corrosive gases.
Základy: Proper grounding is essential for safety and to prevent electromagnetic interference.
Nouzové zastavení: Always incorporate an accessible emergency stop mechanism in your system.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

1 x Ransanx Stepper Motor Controller (Main Unit)
1 x Průvodce rychlým startem
Terminal Blocks & Connection Cables

Package contents of the Ransanx Stepper Motor Controller, showing the main unit, quick start guide, and connection cables.

Obrázek 3.1: Zahrnuté součásti

4. Vlastnosti produktu

Intuitive 1.8" Color Screen: Real-time display of speed, pulse, and other parameters. Easy parameter setting via rotary encoder.
Industrial Modbus Connectivity: Supports Modbus protocol via Serial/RS-485 for reliable integration with PLC and PC control systems.
Wide Motor Compatibility: Universal pulse speed and direction control for Nema 17, Nema 23, and Nema 34 stepper motors (DC 12-24V).
High Precision & Versatility: Features 1Hz–200kHz pulse frequency and 20 built-in motion modes for precise control.
Robust & Expandable I/O: Equipped with 4 limit switch inputs and 3 expansion key interfaces for flexible custom control.

5. Specifikace

Product specifications table for the Ransanx Stepper Motor Controller, detailing model, voltage, outputs, inputs, environment, frequency, display, communication, dimensions, and weight.

Obrázek 5.1: Specifikace produktuview

Parametr	Hodnota
Model	ZK-SMC05
Provozní svtage	DC 12-24V
Výstupní signály	4 outputs (0V output, open-collector type)
Vstupní signály	4 limit switch inputs, 3 expansion key interfaces
Provozní prostředí	-5 °C až +60 °C (bez kondenzace)
Motor Pulse Frequency	1Hz-200kHz
Zobrazit	1.8palcová barevná obrazovka
Motor Pulse Output Voltage	0V, open-collector output
Komunikační protokol	Modbus (supports serial port / Bluetooth / RS-485)
Rozměry produktu	3.27" (L) × 1.89" (W) × 1.40" (H)
Čistá hmotnost	2.54 OZ
Hmotnost balení	3.28 OZ

6. Hardware skončilview

6.1 Přední panel a displej

Front panel of the Ransanx Stepper Motor Controller showing the 1.8-inch color display, FWD, REV, SET, ENT buttons, rotary knob, and Start/Stop button, with labels for each component and display area.

Figure 6.1: Main Interface Display and Operation

The front panel features a 1.8-inch color screen for real-time data display and user interaction. Key controls include:

FWD (vpřed): Initiates forward rotation.
REV (zpátečka): Initiates reverse rotation.
SOUBOR: Enters parameter setting mode or navigates menus.
ENT (Enter): Confirms selections or exits menus.
Otočný knoflík: Adjusts parameter values and navigates menus.
Tlačítko Start/Stop: Toggles motor operation.

6.2 Back Interface and I/O Ports

Back interface schematic diagram of the Ransanx Stepper Motor Controller, showing power supply terminals (DC 12-24V), limit switch inputs, expansion button ports, communication interface, and stepper/servo motor drive outputs.

Figure 6.2: Back Interface Schematic Diagram

The back interface provides various connection points:

Power Supply (DC 12-24V): Connect the main power input.
Limit Switch Inputs (X1-X4): For connecting external limit switches.
Expansion Button Ports: For connecting additional control buttons.
Komunikační rozhraní: For Modbus RS485 connection.
Stepper/Servo Motor Drive Outputs (PUL, DIR, EN): Connect to your motor driver.
Outputs (O1-O4): General purpose outputs.

7. Elektroinstalace a připojení

Proper wiring is crucial for the functionality and safety of the controller. Refer to the diagrams below for correct connections.

7.1 Motor Drive Wiring Diagram

Wiring diagram showing the connection between the Ransanx Stepper Motor Controller, a microstep driver, and a stepper motor. Details connections for PUL, DIR, EN, and power.

Figure 7.1: Motor Drive Wiring Diagram

Connect the controller to your stepper motor driver using the PUL (Pulse), DIR (Direction), and EN (Enable) signals. Ensure the power supply for both the controller and the motor driver are correctly connected and grounded.

7.2 Připojení napájení

Connect a DC 12-24V power source to the designated power input terminals on the back of the controller. Observe polarity: positive to '+' and negative to '-'.

7.3 Limit Switch and Expansion Key Connections

Connect external limit switches to inputs X1-X4 as required by your application. Expansion keys can be connected to their respective ports for additional control functions.

8. Základní obsluha

8.1 Zapnutí

After all connections are securely made, apply power to the controller. The 1.8-inch color screen will illuminate, displaying the main operating interface.

8.2 Navigace na displeji

Close-up of the Ransanx Stepper Motor Controller's 1.8-inch color display, showing real-time monitoring of speed, angle, and cycles, with arrows indicating quick setup and real-time monitoring functions.

Figure 8.1: Intuitive Color Display

The display shows real-time operational data such as speed (RPM), pulse count, and current motion mode. Use the rotary knob to scroll through options and the SET/ENT buttons to select or confirm.

8.3 Starting and Stopping Motor Movement

Stiskněte tlačítko FWD button to initiate forward rotation.
Stiskněte tlačítko REV button to initiate reverse rotation.
Stiskněte tlačítko Start/Stop button to pause or resume motor movement.

9. Provozní režimy

The controller features 20 versatile built-in motion modes, allowing for various complex tasks without external programming. These modes cover a wide array of industrial and DIY project requirements, from simple forward/reverse movements to multi-segment automated sequences.

Diagram illustrating 20 versatile pre-set motion modes, showing examples like Forward, Delay, Reverse, and Loop sequences, emphasizing no programming required.

Figure 9.1: 20 Versatile Motion Modes

To select a mode, navigate to the 'Mode' setting using the SET button and rotary knob, then confirm with ENT. Refer to the Quick Start Guide for a detailed description of each mode and its parameters.

10. Nastavení parametrů

The controller allows adjustment of various parameters to fine-tune motor behavior. These include speed, pulse count, acceleration/deceleration, and delay times.

Stiskněte tlačítko SOUBOR pro vstup do menu nastavení parametrů.
Použijte Otočný knoflík to scroll through the available parameters.
Stiskněte ORL pro výběr parametru k úpravě.
Otočte Otočný knoflík to adjust the value of the selected parameter.
Stiskněte ORL znovu pro potvrzení nové hodnoty.
Stiskněte SOUBOR to exit the parameter setting menu.

11. Komunikace Modbus

The ZK-SMC05 supports Modbus protocol via its RS-485 interface, enabling integration with industrial control systems like PLCs and PCs. This allows for remote control and monitoring of the stepper motor controller.

Spojení: Connect the RS-485 A and B terminals of the controller to your Modbus master device.
Protokol: The controller operates as a Modbus slave device. Refer to the detailed Modbus communication protocol document (available separately or in the full manual) for register addresses and command structures.
Přenosová rychlost: Ensure the baud rate and other communication parameters are matched between the controller and the Modbus master.

12. Řešení problémů

Ovladač se nezapne:
- Zkontrolujte napájení objtage (DC 12–24 V).
- Verify power connections for correct polarity and secure contact.
Motor does not move:
- Ensure motor driver is powered and enabled.
- Check PUL, DIR, EN connections between controller and driver.
- Verify motor parameters (speed, pulse count) are set correctly and not zero.
- Check for active limit switch inputs that might be preventing movement.
Incorrect motor direction:
- Reverse the DIR signal connection or adjust the direction setting in the controller.
Displej zobrazuje chybu:
- Refer to the Quick Start Guide for specific error codes and their meanings.
- Vypněte a zapněte zařízení.

13. Údržba

The Ransanx Stepper Motor Controller is designed for reliable operation with minimal maintenance.

Čištění: Udržujte zařízení čisté a bez prachu. K čištění používejte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani rozpouštědla.
Inspekce: Pravidelně kontrolujte veškeré kabelové spoje, zda nejsou pevně utažené a zda nevykazují známky opotřebení nebo poškození.
Skladování: If storing the controller for an extended period, ensure it is kept in a dry, cool environment, away from direct sunlight and extreme temperatures.

14. Zákaznická podpora

For technical assistance, warranty information, or further inquiries, please contact Ransanx customer support through your purchase platform or the official Ransanx webmísto.

Ransanx ZK-SMC05