AOPUTTRIVER AP-9000F Hot Wire Anemometer User Manual

1. Úvod a konecview

The AOPUTTRIVER AP-9000F is a professional handheld hot wire anemometer designed for precise measurement of air velocity, airflow volume (CFM/CMM), and air temperature. This device is equipped with a retractable sensor probe, making it suitable for various applications, including HVAC system diagnostics, environmental monitoring, and industrial air flow analysis. This manual provides essential information for the safe and effective operation of your AP-9000F anemometer.

2. Co je v krabici

Po vybalení se prosím ujistěte, že jsou všechny níže uvedené položky přítomny a v dobrém stavu:

• AP-9000F Hot Wire Anemometer Unit
• Uživatelská příručka
• Datový kabel typu C

3. Vlastnosti produktu

The AP-9000F anemometer offers a range of features designed for precision and convenience:

• Měření 3 v 1: Accurately measures wind speed (m/s, km/h, ft/min, knots, mph), airflow (CFM/CMM), and wind temperature (°C/°F).
• Retractable Sensor Probe: Features a flexible, extendable probe tip for convenient measurements in confined or hard-to-reach spaces, such as air conditioning vents. Probe dimensions: 298.5 × 40.84 × 23.7 mm.
• LCD displej: A clear, backlit LCD presents wind speed (Max, Min, Real-time), airflow, temperature, and humidity data. Includes anti-interference buttons and a low battery indicator.
• Rozhraní typu C: Equipped with a Type-C charging port and powered by a 1000mAh lithium-ion battery. Supports an optional auto-shutdown function.
• Široká aplikace: Suitable for environmental measurements, air transportation, and air conditioning monitoring systems.

4. Nastavení

4.1 Nabíjení baterie

The AP-9000F is powered by a built-in 1000mAh lithium-ion battery. Before first use, or when the low battery indicator appears on the LCD, charge the device using the provided Type-C data cable.

• Connect the Type-C cable to the charging port on the anemometer and the other end to a standard USB power adapter (not included).
• Plné nabití obvykle trvá 2 až 3 hodiny.
• Poznámka: The device cannot be turned on or operated while it is charging.

4.2 Extending the Sensor Probe

The hot wire sensor is located at the tip of the retractable probe. Carefully extend the probe to the desired length for measurement. The probe can be rotated 360 degrees for optimal positioning.

• Gently pull the probe from the main unit to extend it.
• Adjust the angle of the probe tip as needed.
• After use, retract the probe back into the unit for protection.

5. Návod k obsluze

5.1 Rozložení zařízení a tlačítka

• Tlačítko napájení (červený kruh): Stiskněte pro zapnutí nebo vypnutí zařízení.
• Tlačítko MODE: Switches between different measurement modes (e.g., wind speed, airflow).
• Tlačítko UNIT: Changes the unit of measurement for wind speed (m/s, km/h, ft/min, knots, mph) or airflow (CFM, CMM).
• Tlačítko SET: Used to set the air volume area for accurate CFM/CMM calculations.
• Tlačítko MAX/MIN: Toggles between maximum, minimum, and real-time values on the display.
• Tlačítko HOLD: Zmrazí aktuální údaj na displeji. Dalším stisknutím tlačítko uvolníte.
• Tlačítko °C/°F: Switches the temperature unit between Celsius and Fahrenheit.

5.2 Základní postup měření

1. Zapnutí: Stiskněte tlačítko Tlačítko napájení to turn on the anemometer. The LCD will illuminate.
2. Extend Probe: Carefully extend the sensor probe and position it in the airflow you wish to measure. Ensure the sensor tip is fully exposed to the air stream.
3. Vyberte režim: Stiskněte tlačítko Tlačítko MODE to select between wind speed, airflow, or temperature measurement.
4. Vyberte jednotku: Stiskněte tlačítko Tlačítko UNIT to choose your preferred unit (e.g., m/s, CFM, °C).
5. Set Area (for Airflow): If measuring airflow (CFM/CMM), press the Tlačítko SET to input the cross-sectional area of the duct or vent. Refer to the specifications for area input range.
6. Měření odečtu: The current readings will be displayed on the LCD.
7. Pozastavení dat: Stiskněte tlačítko Tlačítko HOLD to freeze the current reading. Press again to resume live measurement.
8. Max./Min./Průměr: Použijte Tlačítko MAX/MIN na view the maximum, minimum, or average readings recorded during the measurement session.

6. Údržba

6.1 Čištění zařízení

• Hlavní jednotku otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• For the sensor probe, gently clean any dust or debris. Avoid touching the delicate hot wire sensor directly.

6.2 Péče o baterii a její skladování

• Pravidelně dobíjejte baterii, i když zařízení nepoužíváte často, abyste zachovali její stav.
• Store the anemometer in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ensure the sensor probe is fully retracted and protected during storage.

7. Řešení problémů

If you encounter issues with your AP-9000F, please refer to the following common problems and solutions:

8. Specifikace

Detailed technical specifications for the AOPUTTRIVER AP-9000F Hot Wire Anemometer:

9. Záruka a podpora

9.1 Informace o záruce

AOPUTTRIVER products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms and conditions, or visit the official AOPUTTRIVER webpro více podrobností.

9.2 Zákaznická podpora

For technical assistance, troubleshooting, or inquiries regarding your AP-9000F Hot Wire Anemometer, please contact AOPUTTRIVER customer support. Contact information can typically be found on the product packaging, the official AOPUTTRIVER webwebu nebo prostřednictvím vaší nákupní platformy.

When contacting support, please have your product model (AP-9000F) and a detailed description of the issue ready.