Ingenuity 17419-090

Ingenuity 3Dquickclose CS+ Stroller Instruction Manual

Model: 17419-090

Důležité bezpečnostní informace

VAROVÁNÍ: Nedodržení těchto varování a pokynů může mít za následek vážné zranění nebo smrt.

  • Vždy používejte zádržný systém.
  • Nikdy nenechávejte dítě bez dozoru.
  • Zabraňte vážnému zranění pádem nebo vyklouznutím.
  • Do not carry more than one child in the stroller.
  • Do not overload the storage basket or accessory pockets.
  • Před použitím se ujistěte, že jsou všechna zajišťovací zařízení zajištěna.
  • Do not use the stroller if any parts are broken or missing.
  • Maximum weight capacity for the child is 22.5 kg (49.6 lbs).
  • Maximum weight capacity for the storage basket is 4.5 kg (10 lbs).
  • Během seřizování držte děti v dostatečné vzdálenosti od pohyblivých částí.
  • Tento výrobek není vhodný pro běhání nebo bruslení.

Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

  • Ingenuity 3Dquickclose CS+ Stroller Frame
  • Odnímatelná lišta nárazníku
  • Úložný koš
  • 5-Point Safety Harness (pre-installed)
  • Kryt proti dešti
  • Oversize Canopy (pre-installed)

Nastavení

1. Rozložení kočárku

  1. Složený kočárek postavte na rovný povrch.
  2. Release any locking latches that secure the stroller in its folded position.
  3. Lift the handlebar firmly until the stroller frame fully extends and locks into place. Listen for an audible click.
  4. Ensure all frame locks are securely engaged before placing a child in the stroller.
Strana view of the Ingenuity 3Dquickclose CS+ Stroller in its unfolded state.

Obrázek: Boční view of the Ingenuity 3Dquickclose CS+ Stroller, showing its full size when unfolded.

2. Attaching the Bumper Bar

  1. Locate the attachment points on both sides of the stroller frame near the seat.
  2. Align the bumper bar with these points and push until it clicks securely into place.
  3. To remove, press the release buttons on each side and pull the bumper bar away.
Přední view of the Ingenuity 3Dquickclose CS+ Stroller with the bumper bar attached.

Obrázek: Přední strana view of the stroller, highlighting the attached bumper bar and the 5-point harness.

Návod k obsluze

1. Obecné použití

The Ingenuity 3Dquickclose CS+ Stroller is designed for daily use and travel, providing comfort and safety for your child.

A woman pushing the Ingenuity 3Dquickclose CS+ Stroller with a happy baby seated inside.

Image: A woman pushing the stroller with a child, demonstrating typical use.

2. Folding the Stroller (3Dquickclose Technology)

The 3Dquickclose technology allows for a rapid, one-handed fold.

  1. Ujistěte se, že je dítě vyjmuto z kočárku.
  2. Locate the quick-close mechanism (usually a handle or button) on the handlebar.
  3. Activate the mechanism and push the handlebar forward or downward, allowing the stroller to collapse.
  4. Secure the stroller with the auto-lock latch if present.
A person demonstrating the one-handed folding of the Ingenuity 3Dquickclose CS+ Stroller.

Image: A person folding the stroller, showcasing its compact design when collapsed.

3. Nastavení sklonu sedadla

The seat can be fully reclined for newborns and adjusted as your child grows.

  1. Locate the recline adjustment mechanism, typically a lever or strap behind the seat.
  2. To recline, squeeze the lever or loosen the strap and gently push the seat back.
  3. To raise, pull the seat forward while adjusting the mechanism until the desired position is reached.
  4. Ensure the seat is securely locked in place before use.
A hand adjusting the recline mechanism of the Ingenuity 3Dquickclose CS+ Stroller seat.

Image: Close-up of a hand adjusting the seat recline, showing the mechanism for different positions.

4. Zajištění dítěte pětibodovým pásem

K zajištění dítěte vždy používejte 5bodový bezpečnostní pás.

  1. Usaďte dítě do sedačky.
  2. Ramenní popruhy přehoďte přes ramena dítěte a bederní popruhy kolem pasu.
  3. Insert the two buckle prongs into the center buckle until they click.
  4. Adjust the straps to ensure a snug fit, leaving no more than one finger's width between the strap and your child.
  5. To release, press the button on the center buckle.
A hand fastening the 5-point safety harness buckle on a child in the Ingenuity 3Dquickclose CS+ Stroller.

Image: Close-up of the 5-point harness buckle being fastened, ensuring child safety.

5. Using the Oversize Canopy and Storage

The stroller features an extra-large adjustable canopy with a window and a visor for sun protection, along with ampúložiště.

  • Baldachýn: Extend or retract the canopy as needed for sun and wind protection. Use the peek-a-boo window to check on your child.
  • Úložný koš: The large basket located under the seat provides space for essentials. Do not exceed the maximum weight capacity of 4.5 kg (10 lbs).
  • Accessory Pocket: A convenient pocket is located on the canopy for small items like a phone or keys.
A smartphone placed in the accessory pocket on the canopy of the Ingenuity 3Dquickclose CS+ Stroller.

Image: Close-up of the canopy's accessory pocket, demonstrating its use for small personal items.

6. Attaching the Rain Cover

The included rain cover provides protection from wet weather.

  1. Unfold the rain cover.
  2. Drape it over the stroller, ensuring it covers the entire seating area and canopy.
  3. Secure the cover using any attached fasteners or elastic edges to prevent it from blowing off.
The Ingenuity 3Dquickclose CS+ Stroller with the clear rain cover fully installed.

Image: The stroller with its transparent rain cover installed, ready for inclement weather.

7. Car Seat Compatibility

The Ingenuity 3Dquickclose CS+ Stroller is compatible with various car seats from brands such as Britax, Maxi Cosi, and Nuna. Car seat adapters are sold separately.

Refer to the car seat manufacturer's instructions for proper installation and use with the stroller.

Údržba

Pokyny pro čištění

  • Tkanina: Otřete textilní povrchy čističemamp cloth and mild soap. Air dry. Do not bleach.
  • Rám: Wipe the metal and plastic parts of the frame with a soft, damp tkanina. Důkladně osušte.
  • kola: Periodically clean wheels and axles of dirt and debris. Lubricate moving parts with a silicone-based lubricant if necessary.
  • Kryt proti dešti: Otřete dočista s reklamouamp cloth. Ensure it is completely dry before folding and storing to prevent mildew.

Skladování

Store the stroller in a clean, dry place away from direct sunlight and extreme temperatures to prevent damage to materials.

Odstraňování problémů

ProblémMožná příčinaŘešení
Stroller does not fold or unfold easily.Locking mechanisms are not fully disengaged or engaged. Debris in moving parts.Ensure all locks are released before folding/unfolding. Check for obstructions and clear them. Lubricate moving parts if necessary.
Kola jsou tuhá nebo vrzající.Dirt or debris in wheel axles. Lack of lubrication.Důkladně očistěte kola a nápravy. Na pohyblivé části naneste mazivo na bázi silikonu.
Harness is difficult to buckle or unbuckle.Buckle prongs are misaligned or dirty.Ensure prongs are clean and aligned correctly before inserting. Do not force the buckle.

Specifikace

Číslo modelu17419-090
Rozměry produktu (rozložený)92 x 52.07 x 104.78 cm (36.2 x 20.5 x 41.25 palce)
Rozměry ve složeném stavu<92 cm x 52 cm x 105 cm
Hmotnost produktu8.64 kg (19.05 lb)
Maximální hmotnost dítěte22.5 kg (49.6 lb)
Materiálové složení55% Fabric, 25% Plastic, 20% Metal
Typ postroje5-bodový
Typ kola4 kola
Kompatibilní s autosedačkouYes (adapters sold separately)

Informace o záruce

Ingenuity products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Ingenuity webUschovejte si doklad o koupi pro případ reklamace.

Zákaznická podpora

For further assistance, replacement parts, or to view additional product information, please contact Ingenuity customer service or visit our official store.

Internetový obchod: Ingenuity Official Store on Amazon

© 2025 Ingenuity. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.