Lepro SW1 AI Smart Outdoor LED Strip Lights (32.8ft)

Zavedení

This manual provides essential information for the safe and effective use of your Lepro SW1 AI Smart Outdoor LED Strip Lights. These 32.8ft IP65 waterproof RGBCW light strips offer tunable white light from 2700K to 5700K and are controlled via the Lepro app and voice commands. Please read these instructions thoroughly before installation and operation.

Co je v krabici

Před zahájením instalace ověřte, zda jsou přítomny všechny komponenty.

• 1 x 32.8 stop LED páskové světlo
• 1 x 9.84ft Cable with Controller
• 1 x Wall Adapter (36V 24W)
• 12 x montážní klips
• 12 x Screws for Mounting
• 12 x Anchors for Mounting
• 4 x Cable Clips for Securing Power Supply & Controller
• 4 x Screws for Securing Power Supply & Controller
• 4 x Anchors for Securing Power Supply & Controller
• 1 x Uživatelská příručka

Důležité bezpečnostní informace

• This SW1 strip light is designed for outdoor use with an IP65 waterproof rating, making it dust-tight and protected from low-pressure water jets.
• The power supply (adapter) is ne rated for direct outdoor exposure. It must be placed in an electrical box or a protected, dry location for safe and long-term usage.
• Do not cut the strip lights. The length should be selected to closely match your requirements, as trimming will damage the product and void the warranty.
• Ensure the installation surface is dry and clean before attaching the strip lights.
• Always use the provided screws and clips to securely fasten the adapter, controller, and light strip. Adhesive backing alone may not be sufficient for long-term outdoor installation.
• Provozní teplotní rozsah: -20 °C až 40 °C (-4 °F až 104 °F).

Nastavení a instalace

Follow these steps for proper installation and initial setup of your LED strip lights.

1. Otestujte světla: Before permanent installation, connect the strip light to the controller and power adapter, then plug it into an outlet to ensure all lights function correctly. Do not test while the strip is still rolled up.
2. Připravte povrch: Clean the desired installation surface thoroughly to remove any dust or debris. Ensure it is dry.
3. Secure the Power Adapter: Place the power adapter in a suitable electrical box or a protected, dry outdoor location. It must not be directly exposed to weather elements.
4. Zajistěte řídicí jednotku: Use the provided clips and screws to securely fasten the controller to a dry, clean surface.
5. Připojte LED pásek: Carefully peel away the backing paper from the adhesive on the light strip. Attach the strip to the cleaned surface.
6. Zajištění pomocí klipů: Use the provided clips and screws to further secure the LED strip in place along its entire length. This provides additional stability and ensures long-term adhesion, especially in outdoor conditions.

Připojení aplikace

The Lepro SW1 strip light is controlled exclusively via the Lepro app. It is not compatible with the "Lepro Lampux" or "Smart Life" apps.

1. Stáhněte si aplikaci Lepro: Hledat "Lepro" in your device's app store and download the official application.
2. Zaregistrujte si účet: Open the app and follow the prompts to register a new user account.
3. Povolte Bluetooth a Wi-Fi: Ensure your phone's Bluetooth is enabled and that your phone is connected to a 2.4GHz Wi-Fi network. The lights only support 2.4GHz Wi-Fi.
4. Aktivujte světla: Plug in the strip lights to activate them.
5. Přidat zařízení: In the Lepro app, navigate to the homepage and click "Add Device".
6. Find SW1: The app should automatically detect the SW1 device. Select it to proceed.
7. Pair with Wi-Fi: Follow the in-app instructions to pair the device with your 2.4GHz Wi-Fi network.
8. Dokončení: Once paired, the lights are ready for control via the app.

Návod k obsluze

App Control (Lepro App)

The Lepro app provides comprehensive control over your SW1 LED strip lights, offering a wide range of customization options.

• Millions of Color Options: Select from 16 million RGB colors and adjust brightness from 1-100%.
• Laditelná bílá: Choose between 2700K warm white and 5700K cool daylight for various moods and year-round use.
• LightGPM 4 - Personalized AI Lighting Designer: This feature learns your preferences and suggests lighting designs. The more you use it, the more tailored the lighting effects become.
• Take a Photo, Get the Vibe: Upload an image (e.g., a room photo, movie poster) to the app, and LightGPM will generate a lighting design that matches the image's colors and mood.
• Synchronizace hudby s LightBeats: Sync your lights with music played through your phone's microphone for dynamic lighting effects. Keep the music sync page active and the phone screen on for continuous operation.

Hlasové ovládání

The Lepro SW1 lights are compatible with Amazon Alexa and Google Assistant for hands-free control.

• Easy Voice Commands: Use simple voice commands to change colors, adjust brightness, or activate specific lighting themes. For example, say "Alexa, turn on the strip lights" or "Hey Google, set the lights to blue."
• Není vyžadován žádný rozbočovač: Direct connection via 2.4GHz Wi-Fi to the Lepro app enables voice control without an additional hub.

Údržba

Proper maintenance ensures the longevity and performance of your Lepro SW1 LED Strip Lights.

• Čištění: Periodically wipe the strip lights with a soft, damp hadříkem k odstranění nečistot a nečistot. Vyhněte se používání agresivních chemikálií nebo abrazivních čisticích prostředků.
• Kontrola připojení: Regularly check the power adapter, controller, and strip connections for any signs of wear, damage, or loose fittings. Ensure the power adapter remains protected in an electrical box.
• Bezpečná montáž: Over time, environmental factors can affect mounting. Periodically check that all clips and screws are securely fastened and the strip is firmly in place.
• Odolnost vůči počasí: While the strip is IP65 waterproof, extreme weather conditions (e.g., heavy storms, prolonged freezing temperatures) can still impact performance. Ensure proper drainage around the installation area.

Odstraňování problémů

If you encounter issues with your Lepro SW1 LED Strip Lights, refer to the following common solutions.

Specifikace

Záruka a podpora

Your Lepro SW1 AI Smart Outdoor LED Strip Lights come with a 2letá záruka výrobce.

For technical support, warranty claims, or further assistance, please contact Lepro customer service through their official website or the contact information provided in the Lepro app.

Můžete také navštívit Obchod Lepro na Amazonu pro další informace o produktu a zdroje podpory.