OREiN OL1700182

OREiN Matter Smart Bathroom Exhaust Fan with Light

Model: OL1700182

1. Úvod

This manual provides instructions for the installation, operation, and maintenance of your OREiN Matter Smart Bathroom Exhaust Fan with Light, Model OL1700182. This device integrates ventilation with advanced lighting features and smart home connectivity.

The fan features a quiet 110 CFM ventilation system, a 1200LM dimmable LED light with adjustable color temperature (2700K–6500K), a 2700K night light mode, and 24-zone AI RGB lighting. It is Matter-certified for seamless integration with smart home platforms like Alexa, Apple Home, Google Home, and SmartThings.

2. Bezpečnostní informace

Read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Always disconnect power at the circuit breaker before installing or servicing the fan.
  • Instalaci musí provést kvalifikovaný elektrikář v souladu se všemi místními a národními elektrotechnickými předpisy.
  • Ujistěte se, že je ventilátor řádně uzemněn.
  • Do not install this fan in a ceiling with insulation that exceeds the maximum recommended thickness.
  • Do not use this fan with any solid-state speed control device unless specifically approved for use with this fan.
  • Tento ventilátor je určen pouze pro všeobecné větrání. Nepoužívejte jej k odsávání nebezpečných nebo výbušných materiálů a par.

3. Nastavení a instalace

The OREiN Smart Bathroom Exhaust Fan is designed for flush mount installation. Ensure you have the necessary tools and materials before beginning.

3.1 Kontroly před instalací

  • Verify that the ceiling cutout dimensions are 7.36 inches x 7.68 inches.
  • Confirm that the duct size is 4 inches. A 4-inch to 3-inch duct reducer is included for flexible installation.
  • Ensure the electrical supply is 120 Volts (AC).

3.2 kroky instalace

  1. Odpojit napájení: Vypněte napájení jističem, abyste předešli úrazu elektrickým proudem.
  2. Příprava zahájení: Create a ceiling cutout of 7.36" x 7.68" if not already present.
  3. Montážní pouzdro: Secure the fan housing to the ceiling joists. The unit includes a bracket system for mounting.
  4. Připojení potrubí: Attach the 4-inch duct to the fan's exhaust port. Use the included reducer if connecting to a 3-inch duct. Ensure all connections are sealed to prevent air leakage.
  5. Wire Electrical: Connect the fan's electrical wires to the household wiring according to local codes. Ensure proper grounding.
  6. Instalace mřížky: Once wiring is complete and secure, attach the decorative grille to the fan housing.
Product dimensions for installation, showing cutout dimensions of 7.36 x 7.68 inches, mounting depth of 6.43 inches, and a 4-inch duct size. Includes a 4-inch to 3-inch duct reducer.

Figure 1: Product Dimensions for Installation. Note the cutout dimensions and duct reducer.

Diagram showing the OREiN smart fan integrated into a whole-home smart control system, compatible with Matter, Alexa, Google Home, Apple Home, and SmartThings.

Figure 2: Matter-Enabled Whole-Home Smart Control. The fan integrates with various smart home platforms.

4. Návod k obsluze

Your OREiN Smart Bathroom Exhaust Fan offers multiple control options for both ventilation and lighting.

4.1 Smart Home Integration (Matter)

The fan is Matter-certified, allowing for quick and seamless integration with major smart home ecosystems.

  • Nastavení: Use the provided QR code or nearby device discovery feature within your preferred smart home app (Alexa, Apple Home, Google Home, SmartThings) to add the fan. No additional hub is required.
  • Hlasové ovládání: Once connected, use voice commands through your smart assistant (e.g., "Alexa, turn on the bathroom fan," "Hey Google, set bathroom light to 4000K," "Siri, dim the bathroom light to 50%").
Image showing the OREiN smart fan with various smart home logos including Matter, Alexa, Google Home, Apple Home, Samsung SmartThings, and AiDot, indicating voice and app control capabilities.

Figure 3: Voice & App Control - Matter Ready. Setup is quick via QR code or nearby discovery.

4.2 Ovládání aplikace

Utilize the dedicated OREiN app or your integrated smart home app for comprehensive control.

  • Ovládání ventilátoru: Turn the fan on/off, and manage its operation.
  • Ovládání osvětlení: Adjust brightness (1-100%), color temperature (2700K-6500K), and activate the 2700K night light mode.
  • RGB osvětlení: Access the 24 independently controlled RGB zones to create custom gradients, layered colors, or subtle accent lighting.
  • AI Lighting Scene Creator: Describe a desired lighting scene (e.g., "sunset glow," "ocean blue," "rainbow gradient"), and the AI will generate a matching ambiance.
  • Plány a časovače: Set automated schedules for fan and light operation, such as turning on in the morning or off at night.
Image showing a remote control and a smartphone app interface for adjusting light color temperatures from 2700K to 6500K, with options for 5 color temps via remote and unlimited via app.

Figure 4: Adjustable Color Temperatures. Control white light from warm to cool.

Image illustrating the exclusive 24-zone DIY color and 65 dynamic lighting effects, controlled via a smartphone app interface showing a color grid for customization.

Figure 5: Exclusive 24-Zone DIY RGB Lighting. Create personalized lighting effects.

Image depicting AI-generated lighting, where users can create lighting scenes with text or voice commands, shown with a smartphone interface for AI interaction.

Figure 6: AI-Generated Lighting. Create scenes using text or voice commands.

Image showing a smartphone app interface for setting schedules, with the fan light turning on at 7:00 AM and off at 11:00 PM, demonstrating automated daily use.

Figure 7: Schedule and Timer Settings. Automate fan and light operation.

4.3 Dálkové ovládání

A dedicated remote control is included for convenient operation of basic functions.

  • Zapnuto/Vypnuto: Control both fan and light.
  • Jas: Upravte intenzitu světla.
  • Teplota barev: Select from preset white light temperatures (e.g., Warm White 2700K, Soft White 3000K, Neutral White 4000K, Daylight 5000K, Cool White 6500K).
  • Režim nočního osvětlení: Activate the soft 2700K night light.
  • RGB režimy: Cycle through RGB color modes (e.g., 7-color cycle, dual-color cycle).
Image showing the remote control for the OREiN smart fan, highlighting buttons for All On/Off, Fan On/Off, Brightness Change, Light On/Off, Night Light Mode, RGB 7 Color Cycle, Dual-Color Cycle, Music Sync, and various white light temperature presets.

Figure 8: Remote Control Functions. Easy access to fan and light settings.

5. Údržba

Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho odsávacího ventilátoru.

  • Čištění mřížky: Periodically remove the grille and wipe it with a soft, damp tkanina. Nepoužívejte abrazivní čisticí prostředky.
  • Čištění lopatek ventilátoru: With power disconnected, gently wipe the fan blades with a damp hadříkem k odstranění prachu a nečistot.
  • Inspekce potrubí: Annually inspect the ductwork for any blockages or disconnections that could impede airflow.
  • Kryt světla: Clean the light cover with a soft, dry or slightly damp tkanina.

Před prováděním jakékoli údržby vždy odpojte napájení.

6. Řešení problémů

If you encounter issues with your OREiN Smart Bathroom Exhaust Fan, refer to the following troubleshooting guide:

ProblémMožná příčinaŘešení
Ventilátor se nezapneŽádné napájení
Uvolněné vedení
Faulty switch/remote
Zkontrolujte jistič. Ujistěte se, že je zapnuté napájení.
Verify all electrical connections are secure (consult an electrician).
Test with app control if remote is suspected. Replace remote batteries.
Světlo se nerozsvítíŽádné napájení
Uvolněné vedení
Vadná součást světla
Zkontrolujte jistič. Ujistěte se, že je zapnuté napájení.
Verify all electrical connections are secure (consult an electrician).
If only the light is affected, contact customer support.
Poor ventilation/High humidityUcpané potrubí
Improper duct installation
Fan size inadequate for room
Zkontrolujte potrubí, zda není ucpané.
Ensure ductwork is properly sealed and routed.
Verify fan CFM rating is appropriate for your bathroom size.
Ventilátor je hlučnýVolná montáž
Překážka v lopatkách ventilátoru
Problémy s potrubím
Ensure fan housing is securely mounted.
Disconnect power and check for debris in fan blades.
Inspect ductwork for kinks or loose connections.
Cannot connect to smart home/appIncorrect setup procedure
Rušení Wi-Fi
Matter hub issues
Review setup instructions for Matter integration. Ensure QR code is scanned correctly.
Ensure your Wi-Fi network is 2.4GHz and stable.
Restart your Matter controller/hub.
Light color temperature is incorrect or inconsistentQuick power cycling
Závada softwaru
Avoid rapidly cycling power. Turn off for 10 seconds, then turn on.
Reset the device via the app or by power cycling for an extended period (e.g., 1 minute).

7. Specifikace

FunkceSpecifikace
ZnačkaOREiN
Název modeluMatter smart bathroom fan (OL1700182)
Design elektrického ventilátoruVýfukový ventilátor
Proud vzduchu110 kubických stop za minutu (CFM)
Úroveň hluku2 Sones
Rozměry produktu6.43"H x 7.55"Š x 7.2"V
Stropní výřez7.36" x 7.68"
Velikost potrubí4" (includes 4" to 3" reducer)
Wattage62 wattů
svtage120 voltů (AC)
Světelný výkon1200 lumenů (LM)
Teplota barev2700K–6500K (Dimmable)
Noční světlo2700 tis
RGB osvětlení24-Zone DIY Color & 65 Dynamic Lighting Effects
Kontrolní metodyAplikace, dálkové ovládání, hlas
Kompatibilita Smart HomeMatter, Alexa, Google Home, Apple Home, SmartThings
Typ instalaceZapuštěná montáž
Hmotnost položky8.98 libry

8. Informace o záruce

For detailed warranty information, please refer to the warranty card included with your product packaging or visit the official OREiN webUschovejte si doklad o koupi pro případ reklamace.

9. Podpora

If you require further assistance or have questions not covered in this manual, please contact OREiN customer support through their official webwebu nebo kontaktních informací uvedených v dokumentaci k produktu.

Související dokumenty - OL1700182

Předview OREiN Koupelnový odsávací ventilátor se světlem - Odstraňování problémů a časté dotazy
Najděte řešení běžných problémů s vaším koupelnovým odsávacím ventilátorem OREiN se světlem, včetně problémů s instalací, výkonem, hlukem a vlhkostí. Získejte odpovědi na často kladené otázky.
Předview OREIN 110/160 CFM ventilátor do koupelny s Bluetooth reproduktorem, 3CCT a nočním světlem: Stručná uživatelská příručka
This guide provides instructions for installing and operating the OREIN 110/160 CFM Bath Fan with Bluetooth Speaker, featuring 3CCT and a night light. It covers safety information, product specifications, installation steps for new and existing constructions, wiring diagrams, troubleshooting, and remote operation.
Předview Uživatelská příručka k chytrým Wi-Fi žárovkám OREiN Matter
Uživatelská příručka pro chytré Wi-Fi žárovky OREiN Matter s podrobným popisem nastavení a integrace s oblíbenými ekosystémy chytré domácnosti, jako jsou Alexa, Google Home, Apple Home a SmartThings. Seznamte se s funkcemi, kompatibilitou a řešením problémů.
Předview OREiN Matter Smart Light Bulb - Operation Manual & Setup Guide
Comprehensive operation manual for the OREiN Matter Smart Light Bulb. Learn how to install, connect, troubleshoot, and use features like app control, voice control, and color changing.
Předview OREIN Matter Smart 110CFM Bathroom Fan with RGBTW LED Light - Quick User Guide
Quick User Guide for the OREIN Matter smart 110CFM Bathroom Fan with RGBTW 1200lm LED Light & Night Light. Includes installation instructions, safety information, specifications, remote operation, and smart home connectivity (Matter, Alexa, AiDot).
Předview Návod k obsluze chytré Wi-Fi žárovky OREIN
Detailed operation manual for the OREIN Wi-Fi Smart Light Bulb, covering compatibility, Wi-Fi requirements, smart hub needs, dimming methods, firmware updates, installation, connection via Matter, AiDot app, Alexa, Google Home, and Apple HomeKit, troubleshooting, and frequently asked questions. Includes warnings and contact information.