Zavedení
This manual provides essential instructions for the setup, operation, and maintenance of your DIGITNOW M485 Belt Drive Turntable. Designed for vinyl enthusiasts, this turntable features a high-quality magnetic cartridge, adjustable counterweight, built-in phono pre-amplifier, and versatile connectivity options including Bluetooth output and USB digital output. Please read this manual thoroughly before use to ensure proper function and longevity of your device.
Co je v krabici
Pečlivě vybalte všechny komponenty a ujistěte se, že jste obdrželi následující položky:
- Wooden Turntable Converter (Main Unit)
- Napájecí adaptér
- Prachový kryt
- Protizávaží na rameni
- Hmotnost proti bruslení
- Platter (with drive belt included)
- Adaptér 45 RPM
- Vinyl Anti-slip Mat
- Úhloměr úhloměru
- USB kabel
- Uživatelská příručka
Image: All components included in the DIGITNOW M485 Belt Drive Turntable package, laid out for identification.
Pokyny pro nastavení
Follow these steps to set up your turntable for the first time. For a visual guide, please refer to the installation video below.
- Instalace talíře a hnacího řemene: Carefully place the turntable platter onto the spindle. Locate the drive belt (pre-installed on the platter or included separately) and gently stretch it around the motor pulley. Ensure the belt is not twisted.
- Slip Mat Placement: Place the vinyl anti-slip mat on top of the platter.
- Counterweight and Anti-Skating Setup:
a. Attach the tonearm counterweight to the rear of the tonearm. Rotate it until the tonearm floats freely and is balanced horizontally.
b. Adjust the counterweight to the recommended tracking force for the AT3600L cartridge (typically 3.5 grams). Refer to the cartridge alignment protractor for precise adjustment.
c. Attach the anti-skating weight by placing its loop on the third notch of the standing hook. This helps prevent the stylus from skipping.
Obrázek: Detail view of the tonearm, showing the adjustable counterweight and the anti-skating fishing line mechanism.
Obrázek: Podrobný view of the Audio Technica AT3600L magnetic cartridge stylus, positioned over a vinyl record.
- Instalace krytu proti prachu: Insert the hinge pockets of the dust cover into the hinges located at the rear of the turntable.
- Připojení napájení: Connect the DC power adapter to the DC 12V jack on the rear of the turntable and plug it into a wall outlet.
- Počáteční zapnutí: Přepněte vypínač na zadním panelu do polohy „ON“.
Nastavení Video průvodce
Video: This official seller video demonstrates the step-by-step installation process for the DIGITNOW Belt-Drive Turntable, including platter, belt, counterweight, and dust cover setup.
Návod k obsluze
Přehrávání vinylové desky
- Place a vinyl record on the slip mat.
- Select the appropriate speed (33 or 45 RPM) using the speed selector knob. Use the 45 RPM adapter for 7-inch singles if needed.
- Zvedněte raménko přenosky pomocí páčky pro nastavení tónu.
- Opatrně umístěte stylus nad požadovanou stopu na desce.
- Lower the tonearm gently using the cueing lever. The record will begin to play.
- To stop playback, lift the tonearm, return it to the tonearm rest, and press the 'STOP' button.
Image: Close-up of the turntable's control panel, showing the 33/45 RPM speed selector and the START/STOP buttons.
Bluetooth Output Connection
The turntable can transmit audio wirelessly to Bluetooth speakers or headphones.
- Ujistěte se, že váš Bluetooth reproduktor nebo sluchátka jsou v režimu párování.
- Press the 'BT' button on the turntable. The Bluetooth indicator light will flash, indicating it is searching for devices.
- Once connected, the Bluetooth indicator light will remain solid blue. You can now play records and stream audio to your paired Bluetooth device.
Image: The DIGITNOW M485 turntable wirelessly connected to a Bluetooth speaker, demonstrating its wireless audio output capability.
RCA Output to Active Speakers
Connect the turntable to active (powered) speakers or an amplifier using the RCA cables for a wired audio experience.
- Connect the RCA cables (red for right, white for left) from the turntable's RCA jacks to the corresponding input jacks on your active speakers or ampživější.
- Ensure the PHONO/LINE OUT switch on the rear of the turntable is set to the appropriate position (PHONO if connecting to a phono input on an amplifier, LINE if connecting to a standard auxiliary input).
- Power on your speakers/amplifier and the turntable, then begin playing a record.
Image: The DIGITNOW M485 turntable connected via RCA cables to a pair of active speakers, illustrating wired audio output.
Image: Close-up of the turntable's rear panel, highlighting the DC 12V power input, USB-PC port, RCA output jacks, and the PHONO/LINE OUT switch.
USB Digital Output (Recording)
You can digitize your vinyl collection by connecting the turntable to a computer via USB.
- Connect the turntable to your computer using the provided USB cable.
- Install audio recording software (e.g., Audacity) on your computer.
- Follow the software's instructions to record audio from the turntable.
Konec produktuview Video
Video: This official seller video provides a general overview of the DIGITNOW Belt Drive Turntable, demonstrating its key features and basic operation.
Údržba
Regular maintenance ensures optimal performance and extends the life of your turntable.
- Čištění stylusu: Gently clean the stylus regularly using a soft brush designed for turntable styli. Always brush from back to front.
- Dust Cover and Unit Cleaning: Use a soft, dry, lint-free cloth to clean the dust cover and the turntable unit. Avoid abrasive cleaners or solvents.
- Kontrola pásu: Periodically check the drive belt for wear or stretching. Replace if necessary to maintain consistent playback speed.
- Péče o záznamy: Keep your vinyl records clean and free of dust to prevent damage to both the records and the stylus.
Odstraňování problémů
Pokud narazíte na problémy, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvukový výstup | Power not connected; Speakers not connected or powered; PHONO/LINE switch incorrect; Stylus guard still on. | Ensure power adapter is connected and unit is ON. Check speaker connections and power. Set PHONO/LINE switch correctly. Remove stylus guard. |
| Přeskakující nebo zkreslený zvuk | Incorrect counterweight/anti-skating setting; Dirty or worn stylus; Dirty or damaged record. | Re-adjust counterweight and anti-skating. Clean or replace stylus. Clean record or try a different one. |
| Problémy s párováním pomocí rozhraní Bluetooth | Device not in pairing mode; Too far from turntable; Interference. | Ensure Bluetooth device is in pairing mode. Move device closer to turntable. Reduce other wireless interference. |
| Nesprávná rychlost přehrávání | Wrong speed selected; Drive belt issues. | Select correct 33/45 RPM speed. Check drive belt for proper placement or wear. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | DIGITNOW |
| Název modelu | Belt Drive Turntable for Vinyl Record Player |
| Číslo dílu výrobce | M485-Černá |
| Barva | Černý |
| Materiál | Dřevo |
| Styl | Retro |
| Typ motoru | Stejnosměrný motor |
| Maximální rychlost otáčení | 45 ot./min |
| Rychlosti přehrávání | 33 1/3, 45 ot./min |
| Speciální funkce | Adjustable Counterweight Force and advanced anti-skating system |
| Kompatibilní zařízení | Bluetooth Speakers/Active Speakers (Not compatible with passive speakers) |
| Vstup | Phono & Line input |
| Výstup | RCA output/USB |
| Zdroj napájení | Elektrický kabel |
| svtage | 12 voltů |
| Spotřeba energie | 6 wattů |
| Formát signálu | Analogový |
| Odstup signálu od šumu | 40 dB |
| Rozměry položky D x Š x V | 18.9 cm D x 16.14 cm Š x 7 cm V |
Záruka a podpora
Your DIGITNOW M485 Belt Drive Turntable comes with a 2-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady a zajišťuje, že váš výrobek bude při běžném používání fungovat dle určení.
For technical support, warranty claims, or any questions regarding your turntable, please contact DIGITNOW customer service through their official website or the retailer where the product was purchased. Please have your model number (M485) and proof of purchase ready when contacting support.
