Jocca 2679

JOCCA 2679 Keramický komínový ohřívač 1500 W Uživatelská příručka

Model: 2679 | Brand: JOCCA

1. Konec produktuview

The JOCCA 2679 Ceramic Chimney Heater is a portable electric heater designed to provide efficient warmth with an aesthetic flame effect. It incorporates PTC ceramic heating technology for rapid and uniform heat distribution.

  • Realistický efekt plamene: Features a simulated flame with 4 adjustable brightness levels to enhance ambiance.
  • Efektivní vytápění: Utilizes 1500W PTC ceramic technology for quick and consistent heating.
  • Nastavitelná nastavení: Offers 2 heat intensity levels and an adjustable thermostat for personalized comfort.
  • Bezpečnostní funkce: Equipped with overheating protection, an anti-tip safety system, a protective grille, and touch controls with an indicator light.
  • Přenosný design: Compact dimensions (approximately 20 cm W x 14.5 cm D x 34 cm H) and a lightweight design (1.75 kg) with an integrated carrying handle for easy relocation.
JOCCA 2679 Ceramic Chimney Heater, front view s efektem plamene

Obrázek 1: Přední strana view of the JOCCA 2679 Ceramic Chimney Heater, showcasing the realistic flame effect and control panel.

2. Důležité bezpečnostní pokyny

Před použitím tohoto spotřebiče si pečlivě přečtěte všechna bezpečnostní varování a pokyny, abyste předešli úrazu elektrickým proudem, požáru a/nebo vážnému zranění.

  • Umístění: Always place the heater on a firm, level surface. Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the heater and away from the sides and rear.
  • Napájení: Zajistěte zvtage indicated on the heater's rating label matches your mains supply voltage. Do not overload electrical circuits.
  • Dozor: Pokud jakýkoli spotřebič používají děti nebo osoby se sníženými fyzickými, smyslovými nebo duševními schopnostmi, nebo pokud se používá v jejich blízkosti, je nutný pečlivý dohled.
  • vlhkost: Do not use the heater in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water. Never immerse the heater in water.
  • Větrání: Do not block air intakes or exhaust openings. Do not use on soft surfaces, like a bed, where openings may become blocked.
  • Ochrana proti přehřátí: The heater is equipped with an automatic overheating protection system. If it overheats, it will shut off. Unplug the heater, allow it to cool, and remove any obstructions before restarting.
  • Anti-Tip Switch: This heater includes an anti-tip safety switch that automatically turns off the unit if it is accidentally knocked over.
  • Údržba: Před čištěním nebo jakoukoli údržbou vždy odpojte ohřívač ze zásuvky.
  • Poškozený kabel/zástrčka: Nepoužívejte žádné ohřívač s poškozeným kabelem nebo zástrčkou, ani po poruše ohřívače, po pádu či jiném poškození.

3. Nastavení

Follow these steps to set up your JOCCA 2679 Ceramic Chimney Heater:

  1. Rozbalit: Opatrně vyjměte ohřívač z obalu. Obal si uschovejte pro budoucí skladování nebo přepravu.
  2. Kontrolovat: Check the heater for any signs of damage. If damaged, do not use and contact customer support.
  3. Umístění: Place the heater on a stable, flat, and heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater from any combustible materials.
  4. Připojení napájení: Plug the power cord into a suitable electrical outlet. Ensure the outlet is rated for 220-240V, 50/60Hz.
JOCCA 2679 Ceramic Chimney Heater, angled view

Obrázek 2: Úhlové view of the JOCCA 2679 Ceramic Chimney Heater, showing its compact design and carrying handle.

4. Návod k obsluze

The JOCCA 2679 heater features intuitive touch controls located on the top panel. An indicator light will confirm your selections.

Diagram of JOCCA 2679 Ceramic Chimney Heater with dimensions

Figure 3: Diagram illustrating the dimensions and key components of the JOCCA 2679 heater.

4.1 Zapnutí/vypnutí

  • To turn the heater ON, press the power button on the control panel. The unit will typically start in a low heat setting with the flame effect active.
  • To turn the heater VYPNUTO, press the power button again. The heater will stop operating.

4.2 Nastavení úrovní tepla

  • The heater offers 2 heat intensity levels. Press the heat setting button (often indicated by a fan or wave icon) to cycle between low heat and high heat modes.
  • Select the desired heat level based on your comfort requirements.

4.3 Ovládání termostatu

  • Use the thermostat control (often indicated by a thermometer icon or +/- buttons) to set your desired room temperature.
  • The heater will automatically turn on and off to maintain the set temperature, optimizing energy consumption.

4.4 Flame Effect Adjustment

  • The realistic flame effect can be adjusted through 4 úrovní jasu. Press the flame effect button (often indicated by a flame icon) to cycle through the different brightness settings.
  • You can use the flame effect independently of the heating function for ambiance.

5. Údržba

Pravidelná údržba zajistí dlouhou životnost a efektivní provoz vašeho ohřívače.

5.1 Čištění

  1. Před čištěním vždy odpojte ohřívač ze zásuvky a nechte jej zcela vychladnout.
  2. Použijte měkký, damp hadříkem otírejte vnější povrchy ohřívače. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  3. Gently vacuum or wipe the air intake and exhaust grilles to remove dust and debris. Ensure these openings remain clear for proper airflow.
  4. Nedovolte, aby do vnitřku ohřívače kapala voda, mohlo by dojít k požáru nebo úrazu elektrickým proudem.

5.2 Skladování

  • Pokud ohřívač skladujete delší dobu, důkladně jej vyčistěte, jak je popsáno výše.
  • Topidlo skladujte pokud možno v originálním obalu na chladném a suchém místě.
  • Avoid placing heavy objects on top of the heater during storage.

6. Řešení problémů

If you encounter issues with your JOCCA 2679 heater, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Ohřívač se nezapne.
  • Není zapojeno.
  • Zásuvka nefunguje.
  • Aktivována ochrana proti přehřátí.
  • Aktivován spínač proti převrácení.
  • Ujistěte se, že je napájecí kabel bezpečně zapojen do funkční zásuvky.
  • Otestujte zásuvku pomocí jiného spotřebiče.
  • Unplug, allow to cool for 10-15 minutes, and check for obstructions.
  • Ujistěte se, že topení je na rovném, stabilním povrchu a ve svislé poloze.
No heat, but fan/flame effect works.
  • Termostat nastaven příliš nízko.
  • Heat setting is off or on low.
  • Zvyšte nastavení termostatu.
  • Select a higher heat intensity level.
Z ohřívače vychází zápach spáleniny.
  • New unit smell (temporary).
  • Hromadění prachu na topných tělesech.
  • This is normal for the first few uses. Ensure good ventilation.
  • Odpojte a vyčistěte ohřívač podle pokynů k údržbě.

If the problem persists after trying these solutions, please contact JOCCA customer support.

7. Specifikace

Detailed technical specifications for the JOCCA 2679 Ceramic Chimney Heater:

ZnačkaJOCCA
Číslo modelu2679
Výkon1500W
Topné tělesoPTC keramika
Úrovně tepla2
TermostatNastavitelný
Efekt plameneRealistic, 4 brightness levels
Bezpečnostní funkceOverheating Protection, Anti-Tip Switch
Rozměry (cca)20 cm (šířka) x 14.5 cm (hloubka) x 34 cm (výška)
Hmotnost (přibližně)1.75 kg
MateriálPlast
Zdroj napájeníElektrický kabel
Zamýšlené použitíIndoor Room Heating
Diagram showing internal safety features of JOCCA 2679 heater

Figure 4: Internal diagram highlighting the safety features such as the PTC ceramic heating element and protective grille.

8. Záruka a podpora

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official JOCCA webwebu. Uschovejte si účtenku jako doklad o koupi.

Výrobce: JOCCA

Webmísto: Visit the JOCCA Store on Amazon (obecné informace o značce)

© 2023 JOCCA. All rights reserved. | Please recycle responsibly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.