Důležité bezpečnostní informace
Please read this entire instruction manual carefully before installing or using your Stelpro Ultra-Quiet Wall Convector Heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Keep this manual for future reference.
- Tento ohřívač je určen pro hardwired installation only. It is not a plug-in unit.
- Tento ohřívač does not include a built-in thermostat. An external electronic wall thermostat (sold separately) is required for operation and temperature control. Mechanical thermostats are not compatible.
- Ensure the electrical supply matches the heater's requirements (240V or 208V).
- Instalaci musí provést kvalifikovaný elektrikář v souladu se všemi národními a místními elektrotechnickými předpisy.
- Do not install the heater near flammable materials or in areas where gasoline, paint, or other flammable liquids are stored or used.
- Maintain proper clearances from walls, furniture, and drapes as specified in the installation guide.
Nastavení a instalace
The Stelpro ASHC1502WCW convector heater is designed for surface-mount wall installation. For safe and proper operation, professional installation is highly recommended.
Montáž
The heater features a concealed mounting bracket and a back entry plate with cable clamps for a clean, secure installation. Ensure the mounting surface is flat and capable of supporting the heater's weight.
Elektrické připojení
This unit requires a 240V or 208V hardwired electrical connection. It is crucial to connect the heater to a dedicated circuit with appropriate overcurrent protection. Refer to the wiring diagram provided with the product packaging for detailed electrical connection instructions.
Požadavek na termostat
As this heater does not have an integrated thermostat, an external electronic wall thermostat must be installed and wired to control the heater's operation. Ensure the chosen thermostat is compatible with 240V/208V electric heating systems.
Návod k obsluze
Once properly installed and connected to an electronic wall thermostat, operating your Stelpro convector heater is straightforward.
- Zapnutí: Ensure the circuit breaker supplying power to the heater is in the 'ON' position.
- Nastavení termostatu: Use your external electronic wall thermostat to set the desired room temperature. The heater will activate when the room temperature falls below the set point and deactivate once the set point is reached.
- Tichý provoz: This convector heater operates silently, providing consistent warmth without fan noise.
- Počáteční použití: During the first few hours of operation, a slight odor may be emitted. This is normal and will dissipate quickly as manufacturing residues burn off. Ensure adequate ventilation during this period.
Údržba
Your Stelpro convector heater requires minimal maintenance to ensure optimal performance and longevity.
- Čištění: Pravidelně čistěte vnější povrch ohřívače měkkým hadříkemamp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is turned off and cool before cleaning.
- Odstranění prachu: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. This helps maintain efficient airflow.
- Inspekce: Annually, inspect the heater for any signs of damage or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- Do Not Obstruct: Never block the air intake or discharge openings of the heater. This can lead to overheating and reduced efficiency.
Odstraňování problémů
If your Stelpro convector heater is not operating as expected, consult the following troubleshooting guide before contacting support.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Ohřívač se nezapne. | Žádné napájení. Termostat nastaven příliš nízko. Faulty wiring or thermostat. | Zkontrolujte jistič. Zvyšte nastavení termostatu. Poraďte se s kvalifikovaným elektrikářem. |
| Topidlo produkuje nedostatečné teplo. | Velikost místnosti překračuje topný výkon. Airflow obstructed. Problém s kalibrací termostatu. | Ensure heater matches room size (up to 150 sq ft). Clear obstructions from grilles. Recalibrate or replace thermostat. |
| Neobvyklé pachy během provozu. | Počáteční spalování výrobních zbytků. Hromadění prachu na topném tělese. | Ensure ventilation; odor should dissipate. Clean heater as per maintenance section. |
Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu Stelpro nebo kvalifikovaného elektrikáře.
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Stelpro |
| Číslo modelu | ASHC1502WCW |
| Wattage | 1500W (at 240V) / 1125W (at 208V) |
| svtage | 240 voltů |
| Ampvymazat | 6.25 Amps |
| Rozměry produktu (D x Š x V) | 3.94" × 28.63" × 17.56" (101 mm × 727 mm × 446 mm) |
| Hmotnost položky | 15.7 libry |
| Pokrytí topení | Až 150 čtverečních stop |
| Speciální funkce | Energy Efficient, Fast Heating, Noiseless |
| Form Factor | Skříň |
| Barva | Bílý |
| Typ montáže | Držák na zeď |
| Typ paliva | Elektrický |
| Vnitřní/venkovní použití | Krytý |
| UPC | 626296203491 |
Záruka
The Stelpro Ultra-Quiet Wall Convector Heater (Model ASHC1502WCW) is backed by a comprehensive warranty:
- 5letá omezená záruka on the entire unit.
- Doživotní záruka na topném tělese.
- 3 roky záruka na elektronických součástkách.
Uschovejte si doklad o koupi pro případné reklamace. Úplné záruční podmínky naleznete v dokumentaci dodané s produktem nebo navštivte oficiální webové stránky Stelpro. webmísto.
Podpora
For technical assistance, warranty inquiries, or to purchase replacement parts, please contact Stelpro customer service.
You can find more information and contact details on the official Stelpro webmísto: Visit the Stelpro Store on Amazon
When contacting support, please have your model number (ASHC1502WCW) and proof of purchase readily available.