Green Soul Vision Pro V2 Ergonomic Gaming Chair User Manual

1. Úvod

The Green Soul Vision Pro V2 is an ergonomic gaming chair designed for comfort and performance. It features breathable, abrasion-resistant premium fabric and ultra-fine stitching for durability. The chair includes magnetic memory foam neck and lumbar pillows for targeted support, fully adjustable 4D armrests, an integrated retractable leg rest, and advanced functional features like a 180° recline.

Figure 1: Green Soul Vision Pro V2 chair in a typical setup.

Figure 2: Detail of the chair's breathable fabric and stitching.

2. Bezpečnostní informace

• Nestůjte na židli.
• Nepoužívejte židli jako schůdky.
• Před použitím se ujistěte, že jsou všechny šrouby a vruty bezpečně utažené.
• Během seřizování držte děti v dostatečné vzdálenosti od pohyblivých částí.
• Nepřekračujte maximální nosnost (viz specifikace).
• Avoid placing the chair near heat sources or direct sunlight to prevent material degradation.

3. Obsah balení

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Green Soul customer support.

• Opěradlo
• Sedák
• Područky (2)
• Plynový výtahový válec
• Kryt plynového výtahu
• Hvězdná základna
• Kolečka (5)
• Mechanická deska
• Magnetic Neck Pillow
• Memory Foam Lumbar Pillow
• Hardware Kit (screws, Allen wrench)

4. Nastavení a montáž

Green Soul offers complimentary installation services for this chair. Their team will contact you within 3 days of your order delivery to schedule a convenient installation appointment. If you choose to assemble the chair yourself, please follow the general steps below:

1. Připevněte kolečka k hvězdicové základně: Insert each caster into the holes at the end of the star base until it clicks into place.
2. Vložte plynový zvedák: Place the gas lift cylinder into the center hole of the star base. Cover it with the gas lift cover.
3. Připevnění desky mechanismu k základně sedadla: Align the mechanism plate with the pre-drilled holes under the seat base. Secure it with screws using the provided Allen wrench. Ensure the front of the mechanism faces the front of the seat.
4. Připevnění loketních opěrek k základně sedadla: Secure the armrests to the sides of the seat base using the designated screws.
5. Connect Seat Base to Gas Lift: Carefully place the assembled seat base onto the gas lift cylinder.
6. Připevnění opěradla k základně sedáku: Align the backrest with the mounting brackets on the seat base and secure it with screws.
7. Install Pillows: Attach the magnetic neck pillow to the headrest and position the memory foam lumbar pillow for desired support.

Figure 3: Chair dimensions for reference during assembly and setup.

5. Návod k obsluze

The Green Soul Vision Pro V2 chair offers multiple adjustment options for personalized comfort.

5.1. Nastavení výšky

To adjust the chair height, pull the lever located under the seat upwards while applying or releasing tělesné hmotnosti. Uvolněte páku v požadované výšce.

5.2. Funkce sklopení

The chair features a 180° full recline function. Pull the recline lever on the side of the seat upwards and lean back to the desired angle. Release the lever to lock the position. To return to an upright position, pull the lever and lean forward.

Figure 4: Recline range from 90° to 180°.

5.3. Funkce houpání

The chair has a 30-degree rocking function. To enable rocking, pull the tilt lock lever (often the same as the height adjustment lever) outwards. To lock the chair in an upright position, push the lever inwards.

5.4. 4D loketní opěrky

The 4D armrests can be adjusted in four directions: height, depth (forward/backward), width (inward/outward), and pivot (rotation). Use the buttons or levers on the armrests to make these adjustments.

Figure 5: Detail of the 4D armrest adjustment mechanism.

5.5. Retractable Leg Rest

To use the integrated leg rest, pull it out from under the seat. Extend it to the desired length and position. Push it back in when not in use.

5.6. Magnetic Neck and Lumbar Pillows

The magnetic neck and lumbar pillows can be easily attached, removed, and repositioned to provide optimal support for your neck and lower back.

Obrázek 6: Přesview of key adjustable features including pillows, leg rest, and wheelbase.

5.7. Videoukázka

6. Údržba

• Čisticí látka: Použijte měkký, damp cloth with mild soap and water to clean the fabric. Avoid harsh chemicals or abrasive cleaners.
• Cleaning Base and Casters: Wipe the metal base and casters with a damp cloth. Periodically remove any hair or debris from the casters to ensure smooth movement.
• Utahovací hardware: Periodically check and tighten all screws and bolts to maintain stability and safety.
• Mazání: If any moving parts (e.g., gas lift, mechanism) begin to squeak, a small amount of silicone-based lubricant can be applied.

7. Řešení problémů

• Židle se propadá nebo nedrží vzpřímeně: This usually indicates a faulty gas lift cylinder. Contact customer support for a replacement.
• Vrzání židle: Check all bolts and screws for tightness. If the squeaking persists, apply a small amount of lubricant to the moving parts of the mechanism.
• Kolečka se neotáčejí hladce: Remove any hair, dust, or debris that may be caught in the caster wheels. Clean the wheels thoroughly.
• Armrests Are Loose: Tighten the screws securing the armrests to the seat base.

8. Specifikace

9. Záruka a podpora

The Green Soul Vision Pro V2 chair comes with a 3-letá záruka, ensuring durability and peace of mind. For any product-related inquiries, support, or warranty claims, please contact Green Soul customer care.

• Péče o zákazníky: +91 8444-956-789
• E-mail: info@greensoul.online

Figure 7: Green Soul's commitment to quality and support.