TaoHFE CT-VB003PK

TaoHFE Pink Kids Vanity Table and Chair Set Instruction Manual

Model: CT-VB003PK

1. Úvod

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your TaoHFE Pink Kids Vanity Table and Chair Set, Model CT-VB003PK. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

2. Bezpečnostní informace

  • Během montáže uchovávejte všechny malé díly a obalové materiály mimo dosah dětí, abyste předešli nebezpečí udušení.
  • Před použitím se ujistěte, že jsou všechny šrouby a spojovací prvky bezpečně utažené. Pravidelně kontrolujte a v případě potřeby dotahujte.
  • Do not allow children to climb on the vanity table or chair.
  • Place the vanity set on a flat, stable surface to prevent tipping.
  • The LED mirror requires batteries (not included). Ensure correct battery polarity and dispose of used batteries responsibly.
  • Nevystavujte výrobek nadměrné vlhkosti nebo přímému slunečnímu záření.

3. Obsah balení

Před zahájením montáže ověřte, zda jsou přítomny všechny níže uvedené komponenty. Pokud některé díly chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

  • Vanity Table Top with Mirror
  • Nohy stolu (4)
  • Drawer with Crystal Handle
  • Side Cabinet with Door
  • Opěrka židle
  • Křeslo Seat
  • Nohy židle (4)
  • Montážní materiál (šrouby, hmoždinky atd.)
  • Návod k použití
TaoHFE Pink Kids Vanity Table and Chair Set

Obrázek 3.1: Přesview of the TaoHFE Pink Kids Vanity Table and Chair Set.

4. Nastavení a montáž

Assembly typically requires a Phillips head screwdriver (not included). Follow the steps carefully.

4.1. Assemble the Vanity Table

  1. Attach the four table legs to the main table body using the provided screws. Ensure they are securely fastened.
  2. Slide the drawer into its designated slot. Attach the crystal handle to the drawer front.
  3. Attach the side cabinet door to the cabinet frame using the provided hinges.
  4. Carefully place the vanity top with the mirror onto the assembled base, aligning it with the pre-drilled holes. Secure it with screws.
Close-up of LED lighting, crystal handle, and display glass

Figure 4.1: Detail of the LED mirror, crystal handle, and display glass.

4.2. Assemble the Chair

  1. Attach the four chair legs to the chair seat using the provided screws.
  2. Secure the chair backrest to the chair seat and legs.

4.3. Install LED Mirror Batteries

  1. Locate the battery compartment behind the mirror.
  2. Insert the required batteries (type and quantity specified on the compartment cover) ensuring correct polarity.
  3. Bezpečně zavřete kryt bateriového prostoru.
View of the LED light wiring and battery compartment behind the mirror.

Obrázek 4.2: Zadní view showing LED light wiring and battery compartment.

5. Návod k obsluze

5.1. Using the LED Mirror Light

To activate the LED light, press the power button located on the vanity surface near the mirror. Press again to turn off the light. The light provides natural, warm illumination.

Close-up of the LED light power button located on the vanity surface.

Figure 5.1: Location of the LED light power button.

5.2. Využití úložiště

The vanity table includes a main drawer with six partitioned compartments for organizing small items such as jewelry, hair accessories, or small toys. A side cabinet with a door offers additional enclosed storage space.

Open drawer revealing six partitioned storage compartments for accessories.

Figure 5.2: Open drawer showing partitioned storage.

Vanity set showing the side cabinet with a door for additional storage.

Figure 5.3: Vanity with side cabinet for storage.

6. Údržba

6.1. Čištění

  • Otřete povrchy měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie.
  • For the mirror, use a glass cleaner and a lint-free cloth.
  • Ensure the vanity is dry after cleaning to prevent water damage.

6.2. Obecná péče

  • Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevně utažené.
  • Nepokládejte horké předměty přímo na povrch umyvadla.
  • Keep the vanity away from direct heat sources or prolonged exposure to sunlight to prevent material degradation.

7. Řešení problémů

  • LED světlo nefunguje:
    Check if batteries are correctly installed and not depleted. Replace batteries if necessary. Ensure the power button is pressed firmly.
  • Lepení zásuvky:
    Ensure the drawer is properly aligned on its runners. Check for any obstructions within the drawer or its compartment.
  • Vanity or Chair Wobbles:
    Verify that all assembly screws are securely tightened. Ensure the product is placed on a level surface.

8. Specifikace

FunkceDetail
ZnačkaTaoHFE
Číslo modeluCT-VB003PK
BarvaRůžový
MateriálUmělé dřevo
Rozměry produktu16.6 x 31.5 x 40.5 inches (Vanity)
Hmotnost položky40 libry
Montáž VyžadovánaAno
Typ zrcadlaLED osvětlené zrcadlo
SkladováníDrawer with 6 compartments, Side Cabinet
Detailed dimensions of the vanity table and chair.

Obrázek 8.1: Diagram rozměrů produktu.

9. Informace o záruce

For specific warranty details regarding your TaoHFE Pink Kids Vanity Table and Chair Set, please refer to the warranty card included with your purchase or contact TaoHFE customer support directly. Warranty terms and conditions may vary.

10. Zákaznická podpora

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact TaoHFE customer support. Refer to the contact information provided on the product packaging or the official TaoHFE webmísto.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.