ECONTROLLY Replacement Remote Control User Manual

Zavedení

This manual provides instructions for the ECONTROLLY Replacement Remote Control, designed for use with various smart home theater projectors. Please read this manual carefully before using your remote control to ensure proper operation and to maximize its lifespan.

Kompatibilní modely projektorů:

• Yaber V12 / U12
• DBPOWER G01
• VOPLLS M10
• WiMiUS K9
• TOPTRO X9
• Wanbo TT
• MECOOL KP2
• Blitzwolf BW-V6

Nastavení

1. Instalace baterie

The remote control requires AAA ALKALINE batteries for operation. Rechargeable batteries are not supported.

1. Najděte kryt prostoru pro baterie na zadní straně dálkového ovladače.
2. Posuňte kryt ve směru šipky.
3. Insert two (2) AAA ALKALINE batteries, ensuring the positive (+) and negative (-) terminals match the markings inside the compartment.
4. Bezpečně zavřete kryt bateriového prostoru.

Poznámka: Baterie nejsou součástí dálkového ovladače.

2. Párování s projektorem

This remote control requires pairing with your projector before its first use. Follow these steps to establish a connection:

1. Ensure your projector is powered on and within range of the remote control.
2. Simultaneously press and hold the "OK" button and the "Vol-" (Volume Down) button on the remote control.
3. Continue holding both buttons for approximately 3 to 10 seconds.
4. Release the buttons once the pairing indicator (if available on your projector or remote) confirms a successful connection, or when the remote begins to control the projector.

If pairing fails, ensure batteries are correctly installed and try again. Refer to your projector's manual for specific pairing instructions if issues persist.

Obrázek: Přední strana view of the ECONTROLLY Replacement Remote Control, showing all buttons including OK and Volume Down for pairing.

Obsluha dálkového ovládání

The remote control features a standard layout for easy navigation and control of your smart projector. Below is a general overview běžné funkce tlačítek:

Obrázek: Úhlový view of the remote control, highlighting the button layout for operation.

• Tlačítko napájení (červené): Zapíná nebo vypíná projektor.
• Tlačítko ztlumení: Ztlumí nebo zapne zvukový výstup.
• Navigační klávesnice (nahoru, dolů, vlevo, vpravo): Procházení nabídek a výběrů.
• Tlačítko OK: Confirms selections or enters menus.
• Tlačítko Zpět: Návrat na předchozí obrazovku nebo do nabídky.
• Tlačítko Domů: Returns to the projector's main home screen.
• Zvýšení hlasitosti (+) / Snížení hlasitosti (-): Upravuje hlasitost zvuku.
• F+ / F- Buttons: May control focus or other projector-specific functions. Refer to your projector's manual.
• Číselná klávesnice (0-9): For direct input of channels or other numerical data.
• Tlačítko USB: Likely switches input to a USB source.
• Dedicated App Buttons (NETF, prim video, YouT b, OPEN BROWSER): Provides quick access to popular streaming services and the web prohlížeč.

Specific button functionalities may vary slightly depending on your projector model. Consult your projector's user manual for detailed information.

Údržba

Abyste zajistili dlouhou životnost a optimální výkon vašeho dálkového ovladače, dodržujte tyto pokyny pro údržbu:

• Čištění: Use a soft, dry cloth to wipe the surface of the remote control. Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the remote.
• Výměna baterie: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA ALKALINE batteries.
• Skladování: Store the remote control in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If the remote will not be used for an extended period, remove the batteries to prevent leakage.
• Vyhněte se kapkám: Protect the remote from physical impact. Dropping the remote can damage internal components.

Odstraňování problémů

If you encounter issues with your ECONTROLLY Replacement Remote Control, try the following troubleshooting steps:

• Dálkové nereaguje:
  • Check if the batteries are correctly installed with the correct polarity (+/-).
  • Replace old batteries with new AAA ALKALINE batteries.
  • Ensure there are no obstructions between the remote control and the projector's infrared receiver.
  • Confirm the remote is pointed directly at the projector's receiver.
• Problémy s párováním:
  • Repeat the pairing process (hold "OK" and "Vol-" for 3-10 seconds).
  • Ensure the projector is powered on and ready for pairing.
  • Move closer to the projector during the pairing process.
  • Consult your specific projector's manual for its unique pairing requirements.
• Omezená funkčnost:
  • Some advanced functions or specific buttons might require specific projector firmware or settings. Refer to your projector's manual.
  • Ensure the remote is fully paired and recognized by the projector.

Pokud problémy přetrvávají i po vyzkoušení těchto kroků, kontaktujte prosím zákaznickou podporu.

Specifikace

Obrázek: Přední strana view of the remote control displaying its dimensions: 6.7 inches in length and 1.75 inches in width.

Záruka a podpora

Informace o záruce

This ECONTROLLY remote control comes with a Záruka 12 měsíců from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or battery leakage.

Zákaznická podpora

For technical assistance, troubleshooting, or warranty claims, please contact your retailer or the manufacturer, Shengxingwang Factory. Please have your product model (B0FPQ2WS3C) and purchase information ready when contacting support.

Manufacturer: Shengxingwang Factory