GONEO Portable EV Charger Type 2 Schuko Monophasic 16A 3.68kW 5M User Manual

1. Úvod

This manual provides essential information for the safe and efficient operation of your GONEO Portable EV Charger. Please read these instructions carefully before using the product and retain them for future reference. This charger is designed for electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) equipped with a Type 2 connector.

2. Bezpečnostní informace

Your safety is paramount. This charger incorporates multiple safety features to ensure reliable operation. Always adhere to local electrical safety regulations.

• Inteligentní ovládání teploty: The charger's Schuko plug and control box are equipped with NTC temperature sensors. If the temperature exceeds 65°C, the charging current automatically reduces to 6A. If the temperature rises above 70°C, charging stops to prevent overheating.
• Advanced AC+DC Leakage Protection: Features double leakage detection (AC 30mA + DC 6mA) to immediately cut power in case of leakage, preventing electrical shocks, fires, and battery damage.
• Automatic Ground Detection: Each connection initiates an automatic ground check. A red light indicates a connection fault, ensuring safe charging without technical expertise.
• Correct Schuko Plug Selection: Domestic Schuko plugs have different maximum amperages. Ensure you select the correct type (e.g., max 16A for 3.68kW, max 10A for 2.3kW) to match your charger's capabilities and prevent overheating or safety risks.
• Multiple Integrated Safety Protections: Includes protection against overvoltage, podpaltage, overcurrent, short circuits, leakage, overheating, static electricity, relay sticking, ignition, ground fault, communication failure (EV Type 2), and Type 2 disconnection.

Image: NTC Temperature Sensors for Safe Charging.

Image: RCD 30mA AC + 6mA DC Differential Protection.

Image: Automatic Ground Detection for Safer Charging.

Image: Multi-Protection Features of the Portable EV Charger.

3. Co je v krabici

Po vybalení se prosím ujistěte, že jsou všechny položky přítomny a v dobrém stavu:

• Portable EV Charger (with integrated cable and connectors)
• Uživatelská příručka
• Rozpínací šrouby (pro montáž na zeď)
• Přepravní taška

4. Konec produktuview

The GONEO Portable EV Charger is a robust and reliable charging solution. It features a durable TPU reinforced cable, silver-plated connectors, and flame-retardant, UV-resistant materials.

4.1 Komponenty

• Ovládací skříňka: Houses the intelligent control system and LED display.
• Type 2 Charging Connector: Connects to your electric vehicle.
• Zásuvka Schuko: Connects to a standard domestic power outlet.
• Kabel: 5-meter TPU reinforced cable.

4.2 LED displej a ovládací prvky

The clear LED screen displays real-time current, voltage, temperature, and charging time. The control button allows for adjustments.

Image: LED Display Information.

• Hlavní rozhraní: Shows charged capacity, voltage, real-time current, casing temperature, Schuko plug temperature, and current adjustment.
• Sub-interface (Hold button for ~10 seconds): Zobrazuje svtage, Schuko plug temperature, and control box temperature.
• Light Strip Indicators:
  • Green (solid): Normal operation, standby.
  • Blue (breathing): Charging in progress.
  • Green (solid): Charging complete.
  • Red (solid): Fault warning.

5. Nastavení

Before first use, ensure the charger is properly installed and connected.

5.1 Montáž na stěnu (volitelné)

You can use the included expansion screws to mount the control box on a wall for convenience.

Image: Wall Mounting Points and Screws.

5.2 Připojení napájení

Connect the Schuko plug to a suitable domestic power outlet. The charger's screen will illuminate and enter the default standby mode. Ensure the outlet provides proper grounding; the charger will not operate without it.

Image: Selecting the Correct Schuko Plug.

6. Návod k obsluze

Pro nabití elektromobilu postupujte podle těchto kroků.

6.1 Základní kroky nabíjení

1. Connect the Schuko plug to a properly grounded domestic outlet.
2. Configure the desired charging current (see section 6.2).
3. Plug the Type 2 charging cable into your EV.

Image: Simple Steps to Charge Your EV.

6.2 Adjusting Current and Delay Time

The charger allows you to select current settings (6A/8A/10A/13A/16A) and program delay timers (1H/2H/4H/8H).

1. Access New Interface: Press and hold the start button for 3-7 seconds until the light strip flashes green. Release the button.
2. Nastavení proudu: Briefly press the start button repeatedly to cycle through desired current values. The number in the indicator area will flash.
3. Nastavení doby zpoždění: Press and hold the start button for 3-5 seconds until the light strip flashes cyan. Briefly press the start button repeatedly to cycle through desired delay times. The number will flash.
4. Automatic Save: Wait for the number to stop flashing (approx. 7 seconds) to confirm settings. You can now connect to your EV.

Image: How to Configure Current and Delay Time.

The charger automatically saves your last current configuration for instant startup.

Image: Automatic Saving of Last Current Configuration.

6.3 Plánované nabíjení

Utilize the programmable timer to charge your EV during off-peak hours, saving energy costs.

Image: Smart Scheduled Charging for Cost Savings.

7. Údržba

Pro zajištění dlouhé životnosti a optimálního výkonu vaší nabíječky dodržujte tyto pokyny pro údržbu:

• Regularly inspect the cable and connectors for any signs of damage, wear, or corrosion. Do not use if damaged.
• Keep the control box and connectors clean and free from dust, dirt, and moisture. Use a dry, soft cloth for cleaning.
• Store the charger in a dry, well-ventilated area when not in use, preferably in its carrying bag.
• Nevystavujte nabíječku po delší dobu extrémním teplotám nebo přímému slunečnímu záření.

8. Řešení problémů

If you encounter issues with your GONEO Portable EV Charger, refer to the following common problems and solutions:

• Nabíječka se nezapíná: Ensure the Schuko plug is fully inserted into a live, grounded outlet. Check the household circuit breaker.
• Red light indicator (E40 error): This indicates a grounding fault. Ensure the power outlet is properly grounded. Do not use the charger if this error persists.
• Nabíjení se neočekávaně zastaví: Check for overheating (temperature sensors may have triggered a shutdown). Ensure the vehicle's charging port is clean and the Type 2 connector is securely plugged in. Verify the selected current is appropriate for your electrical installation.
• Cannot adjust current/timer: Ensure you are following the correct button press sequence as described in section 6.2.

For persistent issues, please contact GONEO customer support.

9. Specifikace

Image: Durability and Safety Testing.

Image: Suitable for Diverse Environments.

Image: Universal Compatibility with Type 2 EVs.

10. Záruka a podpora

GONEO products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official GONEO webwebu. Uschovejte si účtenku jako doklad o koupi.