Návod k obsluze termovizního monokulárního dalekohledu Pard USA Bobcat 480

1. Konec produktuview

The Pard USA Bobcat 480 is a compact thermal imaging monocular designed for observation and ranging. It features a 35mm objective lens, 3.5x optical magnification, and 8x digital zoom, providing clear thermal visibility across various distances. The device incorporates a 480x360 thermal sensor with a 12µm pixel pitch and a sensitivity of ≤18mk, allowing for detection of subtle temperature differences. An integrated laser rangefinder (LRF) offers accurate distance measurements up to 1,000 meters (1,094 yards). The vivid 1920x1080 OLED display enhances image brightness, detail, and contrast. Its compact dimensions (1.77 x 2.13 x 6.14 inches) ensure portability and ease of use in diverse conditions.

Klíčové vlastnosti:

• 35mm objective lens with 3.5x optical and 8x digital zoom.
• 480x360 thermal sensor with 12µm pixels for enhanced clarity.
• Built-in laser rangefinder (LRF) accurate up to 1,000 meters (1,094 yards).
• NETD ≤18mk sensor for detecting small heat signatures.
• 1920x1080 OLED display for bright and sharp contrast.
• Horizontální pole View (FOV): 16.5 m @100 m (11.7° diagonal FOV).
• Compact size: 1.77 x 2.13 x 6.14 inches for portability.

2. Součásti a ovládací prvky

Familiarize yourself with the physical components and control buttons of your Bobcat 480 monocular.

Obrázek 2.1: Hlavní view of the Pard USA Bobcat 480 Thermal Monocular, showcasinjeho kompaktní design a ergonomická rukojeť.

Obrázek 2.2: Přední view of the monocular, highlighting the 35mm objective lens and integrated laser rangefinder components.

Obrázek 2.3: Boční profíkfile of the monocular, showing the arrangement of the control buttons for power, zoom, menu, and rangefinding.

Obrázek 2.4: Shora dolů view illustrating the layout of the control buttons and the eyepiece adjustment dial.

Funkce tlačítek:

• Vypínač: Stiskněte a podržte pro zapnutí/vypnutí.
• Zoom/LRF Button: Short press to activate laser rangefinder. Long press to adjust digital zoom levels.
• Tlačítko nabídky: Vstupte do hlavní nabídky pro nastavení a možnosti.
• Mode/Palette Button: Cycle through different thermal color palettes (e.g., White Hot, Black Hot, Red Hot, Color).
• Nastavení okuláru: Rotate the dial near the eyepiece to adjust diopter for clear focus.
• Port USB-C: Located at the bottom, used for charging and data transfer. Covered by a protective cap.
• Držák na stativ: Standard 1/4-20 thread for mounting on tripods or other accessories.

3. Nastavení

3.1 Instalace baterie

The Bobcat 480 uses a replaceable 18650 rechargeable battery. To install or replace the battery:

1. Locate the battery compartment on the side of the monocular.
2. Otevřete kryt bateriového prostoru.
3. Insert the 18650 battery according to the polarity indicators (+/-) inside the compartment.
4. Bezpečně zavřete kryt bateriového prostoru.

3.2 Nabíjení

Chcete-li nabít baterii:

1. Connect the provided USB-C cable to the monocular's USB-C port.
2. Connect the other end of the cable to a compatible USB power source (e.g., wall adapter, power bank).
3. Kontrolka na zařízení bude ukazovat stav nabíjení.
4. Alternatively, the 18650 battery can be charged using an external battery charger (included).

4. Návod k obsluze

4.1 Zapnutí/vypnutí

• Zapnutí: Press and hold the Power Button for approximately 3 seconds until the display activates.
• Vypnout: Stiskněte a podržte tlačítko napájení přibližně 3 sekundy, dokud se displej nevypne.
• Pohotovostní režim: The device may enter standby mode automatically when inverted or laid down to conserve battery.

4.2 Základní obsluha

• Nastavení zaostření: Rotate the eyepiece adjustment dial to achieve a sharp image for your vision.
• Lupa: Use the Zoom/LRF button to cycle through available digital zoom levels.
• Thermal Palettes: Press the Mode/Palette button to switch between different thermal display modes (e.g., White Hot, Black Hot, Red Hot, Color).
• Laserový dálkoměr: Short press the Zoom/LRF button to activate the laser rangefinder and measure distances.

5. Údržba

5.1 Čištění

• Objektivy: Use a soft, lint-free cloth (e.g., microfiber) specifically designed for optics. Gently wipe the lens surfaces to remove dust or smudges. For stubborn dirt, use a small amount of lens cleaning fluid.
• Tělo: Otřete tělo monokulárního dalekohledu měkkým hadříkemamp hadříkem. Vyhněte se agresivním chemikáliím nebo abrazivním materiálům.

5.2 Skladování

• Store the monocular in a cool, dry place away from direct sunlight and extreme temperatures.
• Pokud skladujete zařízení delší dobu, vyjměte baterii, abyste zabránili jejímu vytečení.
• Keep the lens caps on to protect the objective lens and eyepiece.

6. Řešení problémů

Běžné problémy a řešení:

• Zařízení se nezapne: Ensure the battery is correctly installed and fully charged. Try replacing the battery.
• Obrázek je rozmazaný: Adjust the eyepiece diopter for your vision. Ensure the objective lens is clean.
• Rangefinder not working: Ensure the target is within the specified range (1,000 meters) and there are no obstructions.
• Poor thermal image quality: Check for extreme environmental conditions (e.g., heavy fog, rain) that might affect thermal performance. Ensure the lens is clean.

7. Specifikace

8. Záruka a podpora

Informace o záruce:

The Pard USA Bobcat 480 Thermal Monocular comes with a warranty as described by Amazon. Please refer to your purchase documentation or Amazon's warranty policies for specific details regarding coverage and duration.

Zákaznická podpora:

For any technical assistance, troubleshooting, or warranty claims, please contact Pard customer service or the authorized retailer from whom the product was purchased. You may also visit the official Pard store on Amazon for additional resources and support.

Pard Store on Amazon: Visit the Pard Store