ASUS Prime MR120 ARGB Fan Instruction Manual

1. Úvod a konecview

The ASUS Prime MR120 ARGB Fan is designed to provide efficient and quiet cooling for your computer system. Featuring an extra-thick 28mm frame, 20 Addressable RGB (ARGB) LEDs with dual-sided lighting, and Pulse Width Modulation (PWM) control, this fan offers both performance and aesthetic customization. It is compatible with ASUS Aura Sync for synchronized lighting effects across various hardware components.

Obrázek: Overview of ASUS Prime MR120 ARGB Fan features.

2. Bezpečnostní informace

Přečtěte si prosím a dodržujte tyto bezpečnostní pokyny, abyste předešli poškození produktu nebo zranění:

• Před instalací nebo údržbou se ujistěte, že je počítač vypnutý a odpojený ze zásuvky.
• Handle components with care to avoid electrostatic discharge. Consider using an anti-static wrist strap.
• Do not attempt to disassemble the fan. There are no user-serviceable parts inside.
• Chraňte ventilátor před tekutinami a nadměrnou vlhkostí.
• Ensure proper cable management to prevent interference with moving fan blades.

3. Obsah balení

Ověřte, zda váš balíček obsahuje následující položky:

• 1 x ASUS Prime MR120 ARGB Fan (Black)
• 4 x montážní šrouby
• 1 x PWM Fan Cable (pre-attached or separate)
• 1 x ARGB Cable (pre-attached or separate)

4. Nastavení a instalace

Follow these steps to install your ASUS Prime MR120 ARGB Fan:

1. Připravte si systém: Power off your computer and unplug it from the power source. Open your PC case to access the fan mounting locations.
2. Montáž ventilátoru: Position the fan in your desired location (e.g., front, rear, top of the case, or on a radiator). Ensure the airflow direction is correct for your cooling configuration. Secure the fan using the provided mounting screws.
3. Připojení PWM kabelu: Locate an available 4-pin fan header on your motherboard. Connect the fan's 4-pin PWM cable to this header. This allows your motherboard to control the fan speed based on system temperature.
4. Připojení ARGB kabelu: Locate an available 3-pin 5V Addressable RGB header on your motherboard. Connect the fan's ARGB cable to this header. Poznámka: Do not connect this to a 4-pin 12V RGB header, as this can damage the LEDs.
5. Správa kabelů: Route the cables neatly to avoid interference and improve airflow within your case.
6. Zavření pouzdra a zapnutí: Close your PC case, plug in the power, and power on your system.

Image: The 28mm extra-thick fan frame for enhanced cooling performance.

Image: Illustration of the 20 ARGB LEDs for system illumination.

5. Návod k obsluze

The ASUS Prime MR120 ARGB Fan operates with two primary functions: cooling and lighting.

• Výkon chlazení: The fan's speed is controlled via the 4-pin PWM connection to your motherboard. Most motherboards allow you to configure fan curves in the BIOS/UEFI settings or through software utilities. This enables the fan to adjust its speed (up to 1600 RPM) automatically based on CPU or system temperatures, providing optimal cooling while minimizing noise (as low as 21 dB(A)).
• ARGB osvětlení: The 20 ARGB LEDs and dual-sided frame lighting are controlled through your motherboard's 3-pin 5V ARGB header. Utilize ASUS Aura Sync software or your motherboard's proprietary RGB control software to customize lighting colors, effects, and synchronization with other Aura Sync compatible devices.

Image: Dual-sided frame lighting for consistent aesthetics.

Image: Cooling performance metrics of the fan.

6. Údržba

Pravidelná údržba pomáhá zajistit optimální výkon a dlouhou životnost vašeho ventilátoru:

• Čištění: Periodically, power off your computer and unplug it. Use compressed air to gently remove dust buildup from the fan blades and frame. Avoid using liquid cleaners directly on the fan.
• Inspekce: Check fan cables for any signs of wear or damage. Ensure the fan is securely mounted and that no cables are obstructing its rotation.

7. Řešení problémů

If you encounter issues with your ASUS Prime MR120 ARGB Fan, refer to the following common problems and solutions:

• Ventilátor se netočí:
  • Ensure the 4-pin PWM cable is securely connected to a functional fan header on your motherboard.
  • Zkontrolujte nastavení BIOS/UEFI základní desky a ujistěte se, že je konektor ventilátoru povolen a správně nakonfigurován.
  • Verify that your power supply is providing adequate power to your system.
• ARGB Lights Not Working or Incorrect Colors:
  • Confirm the 3-pin ARGB cable is correctly connected to a 5V Addressable RGB header on your motherboard, not a 12V RGB header.
  • Ensure ASUS Aura Sync software or your motherboard's RGB control utility is installed and configured.
  • Check for any loose connections in the ARGB chain if multiple devices are connected.
• Nadměrný hluk:
  • Verify that the fan is securely mounted and not vibrating against the case.
  • Ensure no cables are touching the fan blades.
  • Adjust the fan curve in your motherboard's BIOS/UEFI or software to reduce fan speed at lower temperatures.
• PWM Daisy-Chaining: Note that while ARGB connections can often be daisy-chained, PWM fan connections typically cannot be daisy-chained without a dedicated fan hub or splitter cable if you have more fans than available motherboard headers.

8. Specifikace

Image: Dual colors and orientation options for the fan.

9. Záruka a podpora

Informace o záruce: The ASUS Prime MR120 ARGB Fan comes with a 2-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady a zajišťuje, že výrobek splňuje stanovené výkonnostní standardy při běžném používání. Uschovejte si prosím doklad o koupi pro případné reklamace.

Technická podpora: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official ASUS support website or contact ASUS customer service. You can find contact information and support resources at www.asus.com/support/.