Zavedení
The Strymon PCH is an advanced stereo active direct interface designed for musicians and audio professionals. It provides a transparent signal path for instruments like guitars, keyboards, and synthesizers, allowing direct connection to mixing consoles or recording interfaces. The PCH also features a studio-grade headphone amplifier for personal monitoring and silent practice.
This manual provides detailed instructions for setting up, operating, and maintaining your Strymon PCH to ensure optimal performance and longevity.
Klíčové vlastnosti
- Advanced Direct Interface: Offers a transparent stereo active direct interface for various instruments.
- Console-Quality Headphone Ampživější: Vestavěná sluchátka amp for detailed stereo monitoring or silent practice, capable of driving high-impedance headphones.
- Virtually Unclippable Design: Internal power circuit boosts standard 9V DC to 24V for massive headroom.
- Flexible Pro Outputs: Supports stereo or dual mono operation with stereo XLR outputs, switchable mic/line level, and ground lift. Stereo Thru outputs include a mono sum ability.
- Robustní konstrukce: Housed in a durable extruded aluminum chassis for silent operation and flat frequency response.
Nastavení
Follow these steps to set up your Strymon PCH:
- Připojení napájení: Connect a standard 9V DC power supply (center-negative) to the 9VDC input jack on the PCH. The unit will internally boost this to 24V for optimal performance.
- Vstup přístroje: Connect your instrument (guitar, synth, keyboard, etc.) to the IN (Left/Right) 1/4" input jacks. For mono instruments, use the Left IN jack.
- Thru Outputs: Use the THRU (Left/Right) 1/4" jacks to send the input signal to other devices, such as an amplifier or pedalboard. The THRU outputs can be summed to mono using the 'sum stereo' switch if desired.
- XLR výstupy: Connect the LEFT OUT and RIGHT OUT XLR jacks to your mixing console, audio interface, or PA system.
- Připojení sluchátek: Plug your headphones into the PHONES 1/4" stereo jack for personal monitoring.

Obrázek: Overview of the Strymon PCH showing input, thru, headphone, and output connections.

Image: Close-up of the PCH rear panel, highlighting the IN, THRU, PHONES, and 9VDC power connections.
Operace
Understanding the controls of your PCH is essential for optimal sound routing and monitoring.
- PHONES Volume Knob: Adjusts the output level for the connected headphones. Rotate clockwise to increase volume, counter-clockwise to decrease.
- SUM (THRU) Switch: This switch affects the THRU outputs.
- Při nastavení na 'sum', the Left and Right input signals are summed to mono and sent to both THRU outputs.
- Při nastavení na 'stereo', the Left input goes to the Left THRU, and the Right input goes to the Right THRU.
- LEVEL (XLR Outputs) Switch: Located near the XLR outputs, this switch selects the output level for the XLR connections.
- Nastavit na 'mic' for connecting to microphone preamps or inputs expecting a mic-level signal.
- Nastavit na 'line' for connecting to line-level inputs on mixers or audio interfaces.
- GROUND (XLR Outputs) Lift Switch: This switch helps eliminate hum and noise caused by ground loops.
- Nastavit na 'lift' to disconnect the ground connection between the PCH and the connected device via XLR.
- Nastavit na 'gnd' (ground) for a standard ground connection. If you experience hum, try switching to 'lift'.

Image: Close-up of the PCH XLR outputs, showing the LEVEL (mic/line) and GROUND (lift/gnd) switches.

Obrázek: Nahoře view of the Strymon PCH, illustrating the overall layout of controls and connections.
Údržba
The Strymon PCH is designed for durability and requires minimal maintenance.
- Čištění: K čištění vnější strany jednotky používejte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Skladování: Store the PCH in a dry environment, away from extreme temperatures and direct sunlight.
- Spojení: Pravidelně kontrolujte všechna kabelová spojení, zda jsou pevně upevněna a zda nevykazují známky opotřebení.
- Napájení: Always use a compatible 9V DC (center-negative) power supply. Using an incorrect power supply can damage the unit.
Odstraňování problémů
If you encounter issues with your Strymon PCH, refer to the following common troubleshooting steps:
| Problém | Možná příčina / řešení |
|---|---|
| Žádný zvukový výstup |
|
| Hučení nebo bzučení |
|
| Low Headphone Volume |
|
| Zkreslený zvuk |
|
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | PCH |
| Hmotnost položky | 1.2 libry (0.54 kg) |
| Rozměry produktu | 4.88" x 2.97" x 1.94" (12.4 x 7.5 x 4.9 cm) |
| Technologie připojení | XLR, 1/4" TRS |
| Počet kanálů | 4 (Stereo In, Stereo Thru, Stereo Out) |
| Kompatibilní zařízení | Guitar, Keyboard, Synthesizer, Pedalboards, Personal Computer, Portable Media Player, Speaker |
| Typ materiálu | Extrudovaný hliník |
| Požadavek na napájení | 9V DC (center-negative) |
| Interní provozní svtage | 24V (internally boosted) |
Záruka a podpora
Informace o záruce a technickou podporu získáte na oficiálních stránkách společnosti Strymon. webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.
Strymon Official Webmísto: www.strymon.net