DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Bezpečnostní informace

VAROVÁNÍ: Před použitím tohoto nářadí si vždy přečtěte a pochopte všechna bezpečnostní varování a pokyny. Nedodržení varování a pokynů může vést k úrazu elektrickým proudem, požáru a/nebo vážnému zranění.

• Při práci s tímto výrobkem vždy používejte ochranné brýle nebo ochranné brýle s bočními štíty a v případě potřeby celoobličejový štít.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Konec produktuview

Obsah balení

• Bezšňůrový Brad Nailer
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• Li-ion baterie 2.0Ah
• Rychlonabíječka na 1 hodinu
• Přepravní pouzdro
• Návod k použití

Součásti nástroje

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Rozměry a hmotnost

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Délka: 10.83 palce (27.5 cm)
• Šířka: 9.45 palce (24 cm)
• Weight: 6.19 lbs (without battery)

3. Nastavení

Instalace baterie

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Zarovnejte baterii se slotem pro baterii v nářadí.
3. Zasuňte baterii do slotu, dokud bezpečně nezapadne na místo.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Stiskněte uvolňovací tlačítko a vytáhněte kryt zásobníku.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Zavřete kryt zásobníku, dokud nezapadne do uvolňovacího tlačítka.

Hřebík Viewer Okno

Hřebík viewer window allows you to quickly check the fastener level. When the window shows červený, it indicates the magazine is without nails. When it shows černý, it indicates the magazine contains nails.

4. Návod k obsluze

Režimy střelby

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

Režim jediné střelby

• Shift the mode switch to the levá strana (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Kontaktujte režim střelby

• Shift the mode switch to the pravá strana (contact firing icon).
• Stiskněte spoušť.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Poznámka: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Nastavení hloubky

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

LED osvětlení

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

LED indikátor

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Červená na: Slabá baterie.
• Červená bliká: Nails/staples are jammed.
• Zelená svítí: No nails/staples in the magazine.
• Zelená bliká: Přehřát.
• Zhasnout: Normální provozní stav.

Oficiální video produktu

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Údržba

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Péče o baterie

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Baterii skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.

6. Řešení problémů

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Specifikace

Kompatibilní spojovací prvky

Figure 9: Compatible nail and staple types.

8. Záruka a podpora

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH webwebu. Než budete kontaktovat podporu, mějte po ruce číslo modelu (024009) a podrobnosti o nákupu.