YEVOLT YVGLL4XS12 3D Green Beam Self-Leveling Laser Level Instruction Manual

1. Konec produktuview

The YEVOLT YVGLL4XS12 is a 3D green beam self-leveling laser level designed for precision in interior renovation and DIY projects. It projects highly visible green lines in all directions, simplifying complex leveling and layout tasks for walls, floors, and ceilings.

Klíčové vlastnosti:

• 3D Green Beam Coverage: Projects super bright green lines for comprehensive alignment.
• Self-Leveling & Lock: Automatically levels within ±4° and features a pendulum lock for transport protection.
• Durable & Water-Resistant: IP54 rating ensures reliability in demanding conditions.
• Flexibilní možnosti montáže: Includes a powerful magnetic base and can be placed on flat surfaces.
• Sada připravená k použití: Comes with the tool, Type-C charging cable, mounting base, and storage bag.

2. Bezpečnostní informace

This device is a Class 2 laser product. Please read and understand all safety instructions before use.

• VAROVÁNÍ: Do not stare directly into the laser beam. Direct eye exposure can cause eye injury.
• Nesměrujte laserový paprsek na lidi nebo zvířata.
• Nepoužívejte laserový nivelační přístroj ve výbušném prostředí, například v přítomnosti hořlavých kapalin, plynů nebo prachu.
• Udržujte zařízení mimo dosah dětí.
• Používejte pouze příslušenství specifikované výrobcem.
• Nepokoušejte se laserový nivelační přístroj upravovat ani rozebírat. Opravy by měl provádět pouze autorizovaný servisní personál.

3. Co je v krabici

Your YEVOLT YVGLL4XS12 laser level kit includes the following components:

• YEVOLT YVGLL4XS12 3D Green Beam Laser Level
• 2 x dobíjecí baterie
• Nabíjecí kabel typu C.
• Magnetická montážní základna
• Skladovací taška

Image: YEVOLT 3D Laser Level with labeled control section, laser assembly, and 3.6V battery.

4. Nastavení

4.1. Nabíjení baterie

1. Insert the provided rechargeable battery into the laser level.
2. Connect the Type-C charging cable to the laser level's charging port and to a suitable USB power source.
3. The battery indicator lights will show the charging status. Ensure the battery is fully charged before initial use for optimal performance.

4.2. Montáž laserové vodováhy

The YEVOLT YVGLL4XS12 offers versatile mounting options:

• Magnetická základna: The powerful magnetic base allows secure attachment to metal surfaces such as steel beams, pipes, or scaffolding.
• Umístění rovného povrchu: The stable base can be placed directly on any flat surface like desktops or ladder steps.
• Montáž na stativ: The device features standard tripod threads for attachment to a compatible tripod (not included).

Image: YEVOLT laser level securely attached to a metal beam using its magnetic base, projecting a green horizontal line.

5. Návod k obsluze

5.1. Zapnutí/vypnutí a výběr režimu

1. Zapnutí: Slide the pendulum lock to the unlocked position. The laser level will automatically enter self-leveling mode.
2. Samonivelační režim: In this mode, the laser level will automatically adjust to project a level line within ±4°. If the device is outside this range, the laser lines will blink rapidly to indicate it is out of level.
3. Manual Mode (Tilt Mode): To activate manual mode, ensure the pendulum is in the locked position. Press and hold the power button for at least 2 seconds. In manual mode, the laser lines are locked and can be projected at any angle. Note that auto-leveling is disabled in this mode, and the laser lines may blink periodically to remind you it's in manual mode.
4. Výběr řádku: Use the dedicated buttons on the control panel to select horizontal, vertical, or a combination of laser lines as needed for your task.
5. Vypnutí: Slide the pendulum lock to the locked position. If in manual mode, press and hold the power button until the laser turns off, then slide the pendulum to the locked position.

Image: YEVOLT laser level projecting green lines across the floor and up the walls, demonstrating its 360-degree coverage for layout tasks.

5.2. Laser Visibility

The YEVOLT YVGLL4XS12 features a high-brightness green laser that maintains clear visibility even in sunlit or high-brightness environments, preventing line blurring during outdoor or well-lit indoor construction.

Image: YEVOLT laser level operating in a room, projecting bright green laser lines clearly visible on the floor and walls.

6. Údržba

6.1. Čištění

Regularly clean the laser level to ensure optimal performance and longevity. Use a soft, damp hadříkem k otření vnějšího povrchu. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.

6.2. Skladování

When not in use, store the laser level in its provided storage bag in a dry, cool place. Ensure the pendulum lock is engaged to protect the internal mechanism during storage and transport.

6.3. Trvanlivost

The YEVOLT YVGLL4XS12 is built with an IP54 rating, making it resistant to dust accumulation and splashing water. This design protects internal components and extends the product's lifespan.

7. Řešení problémů

• Laser lines blinking rapidly: This indicates the device is outside its self-leveling range (±4°). Adjust the position of the laser level until the lines become steady.
• Laser se nezapíná: Check if the pendulum lock is in the unlocked position. Ensure the battery is charged and properly inserted.
• Laser lines are dim: Ensure the battery is fully charged. In bright environments, visibility may naturally decrease; consider using laser enhancement glasses (if available) or working in lower light conditions.
• Laser lines are not level in manual mode: This is expected behavior. Manual mode locks the lines at a specific angle, disabling the self-leveling function.

8. Specifikace

Image: YEVOLT 3D Laser Level specifications including working range, self-leveling range, laser color, and projection.

9. Záruka a podpora

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official YEVOLT webwebu. Uschovejte si účtenku jako doklad o koupi.