1. Úvod
Thank you for choosing the KOORUI 32 inch 4K Computer Monitor. This manual provides essential information for setting up, operating, and maintaining your monitor. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
2. Co je v krabici
Ověřte, zda jsou v balení přítomny všechny komponenty:
- KOORUI 32 inch 4K Monitor
- Stojan na monitor (základna a krk)
- AC Power Cable with Adapter
- Kabel HDMI 2.0
- Uživatelská příručka (tento dokument)
3. Pokyny k nastavení
3.1 Sestavení stojanu
- Monitor opatrně položte displejem dolů na měkký, čistý povrch, abyste zabránili poškrábání.
- Připevněte krk stojanu k zadnímu panelu monitoru. Ujistěte se, že bezpečně zacvakne nebo je upevněn šrouby, pokud jsou součástí dodávky.
- Connect the stand base to the stand neck, securing it with the thumb screw or screws provided.
3.2 Montáž VESA (volitelné)
The monitor supports VESA 100x100mm mounting. If using a VESA mount, remove the stand neck and attach your VESA-compatible bracket to the monitor's rear panel using appropriate screws.

Figure 3.2.1: Monitor dimensions and VESA mounting points (100x100mm).
3.3 Propojovací kabely
- Connect the AC power adapter to the monitor's DC input port and then plug the power cable into a power outlet.
- Connect the HDMI cable from your computer's HDMI output to one of the monitor's HDMI 2.0 ports. Alternatively, use a DisplayPort cable to connect to the monitor's DisplayPort 1.4.
- V případě potřeby připojte k portu Audio Out externí reproduktory nebo sluchátka.

Figure 3.3.1: Rear connectivity panel with labeled ports (HDMI 2.0 x2, DisplayPort 1.4, Audio Out, DC Power).
4. Návod k obsluze
4.1 Zapnutí/vypnutí
Press the power button, typically located on the back or bottom of the monitor, to turn the monitor on or off. The power indicator light will illuminate when the monitor is on.
4.2 Using the OSD Menu (On-Screen Display)
The monitor features an intuitive joystick control for navigating the OSD menu. The joystick is usually located on the back of the monitor.
- Stiskněte joystick: Aktivuje nabídku OSD.
- Move the joystick Up/Down: Prochází možnostmi nabídky.
- Move the joystick Left/Right: Adjusts selected settings or moves to sub-menus.
- Znovu stiskněte joystick: Potvrzuje výběr nebo opouští podnabídku.
4.3 Úprava nastavení
Prostřednictvím nabídky OSD můžete upravit různá nastavení zobrazení:
- Jas/kontrast: Upravte celkový jas a rozdíl mezi světlými a tmavými oblastmi.
- Nastavení barev: Upravte teplotu barev, odstín a sytost.
- Vstupní zdroj: Ručně vyberte mezi vstupy HDMI 1, HDMI 2 nebo DisplayPort.
- Obrazové režimy: Vyberte si z přednastavených režimů optimalizovaných pro různý obsah (např. Standardní, Hra, Film, Text).
- Zvuk: Upravte hlasitost vestavěných reproduktorů nebo připojených zvukových zařízení.

Figure 4.3.1: User interacting with the monitor in a typical work environment.
5. Funkce displeje
The KOORUI 32 inch 4K Monitor offers advanced display technologies for a superior visual experience:
- Rozlišení 4K UHD: Experience stunning clarity with a 3840 x 2160 pixel resolution, providing ample screen space and sharp details.
Figure 5.1.1: The monitor's 4K UHD resolution for detailed visuals.
- High Contrast VA Panel: A VA panel with a 3500:1 static contrast ratio delivers deep blacks and bright whites for enhanced visual depth.
Figure 5.1.2: High contrast ratio for deeper blacks and better detail.
- Vivid & Accurate Colors: With 99% sRGB, 95% DCI-P3 color gamut, and 10-bit color depth (1.07 billion colors), the monitor provides true-to-life color reproduction.
Figure 5.1.3: Wide color gamut and 10-bit color for vivid and accurate visuals.
- HDR Support & Gamma 2.4: High Dynamic Range (HDR) support combined with Gamma 2.4 enhances contrast and shadow detail, providing a more immersive viewzkušenosti.
Figure 5.1.4: HDR support and Gamma 2.4 for improved contrast and shadow detail.
- Technologie adaptivní synchronizace: Compatible with FreeSync and G-Sync, this technology synchronizes the monitor's refresh rate with your GPU's frame rate to eliminate screen tearing and stuttering.
Figure 5.1.5: Game mode and preset options, including Adaptive Sync compatibility.
- Režim péče o zrak: Built-in eye care mode adjusts color temperature to reduce eye strain during prolonged viewsezení.
Figure 5.1.6: Eye care mode for reduced eye strain.
6. Údržba
6.1 Čištění monitoru
- Před čištěním vždy vypněte monitor a odpojte napájecí kabel.
- Lehce používejte měkký hadřík, který nepouští vlákna dampvodou nebo neabrazivním čističem obrazovek.
- Nestříkejte čistič přímo na obrazovku. Nejprve jej naneste na hadřík.
- Nepoužívejte benzen, ředidlo, čisticí prostředky na bázi amoniaku ani abrazivní materiály, protože by mohly poškodit obrazovku nebo...asing.
6.2 Obecná péče
- Chraňte monitor před přímým slunečním zářením, nadměrným teplem nebo vlhkostí.
- Zajistěte řádné větrání kolem monitoru, aby nedošlo k přehřátí.
- Nepokládejte na monitor ani na jeho kabely těžké předměty.
7. Řešení problémů
Pokud se s monitorem setkáte s problémy, podívejte se na následující běžné problémy a jejich řešení:
7.1 Bez napájení
- Ujistěte se, že je napájecí kabel pevně připojen jak k monitoru, tak k funkční elektrické zásuvce.
- Zkontrolujte, zda je napájecí adaptér správně připojen k monitoru.
- Ověřte funkčnost elektrické zásuvky zapojením jiného zařízení.
7.2 Žádný signál
- Zkontrolujte, zda je videokabel (HDMI nebo DisplayPort) bezpečně připojen k monitoru i k počítači.
- Ujistěte se, že je počítač zapnutý a není v režimu spánku.
- Use the OSD menu to manually select the correct input source (HDMI 1, HDMI 2, or DisplayPort).
- Try a different video cable or port on your computer/monitor to rule out a faulty connection.
7.3 Display Problems (e.g., flickering, distorted image)
- Zkontrolujte video kabel, zda není poškozený nebo zda nejsou uvolněné spoje.
- Adjust the resolution and refresh rate settings on your computer to match the monitor's specifications (3840x2160 at 60Hz).
- Aktualizujte ovladače grafické karty na nejnovější verzi.
- Perform a factory reset through the OSD menu if the issue persists.
8. Specifikace
Detailed technical specifications for the KOORUI 32 inch 4K Computer Monitor (Model E3241A):
| Funkce | Specifikace |
|---|---|
| Číslo modelu | E3241A |
| Velikost obrazovky | 32 palce |
| Rezoluce | 3840 x 2160 pixelů (4K UHD) |
| Obnovovací frekvence | 60 Hz |
| Typ panelu | VA |
| Poměr stran | 16:9 |
| Kontrastní poměr | 3500:1 (statický) |
| Jas | 250 cd/m² |
| Barevný gamut | 99 % sRGB, 95 % DCI-P3 |
| Barevná hloubka | 10bitový (1.07 miliardy barev) |
| Podpora HDR | Ano |
| Adaptivní synchronizace | Compatible with FreeSync & G-Sync |
| Konektivita | 2x HDMI 2.0, 1x DisplayPort 1.4, 1x audio výstup, 1x DC napájecí vstup |
| Vestavěné reproduktory | Ano |
| Kompatibilita VESA | 100x100mm |
| Rozměry produktu (se stojanem) | 8.4 x 28.2 x 20.7 palce |
| Hmotnost položky | 12.5 libry |
| svtage | 12 voltů |
9. Záruka a podpora
KOORUI products are designed for reliability and performance. This monitor comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please refer to the warranty card included in your package or visit the official KOORUI webmísto.
For further assistance, please contact KOORUI customer service.