ASUS B650EM MAX Gaming WiFi AMD B650 mATX Motherboard User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your ASUS B650EM MAX Gaming WiFi AMD B650 mATX Motherboard. This motherboard is designed to support AMD Ryzen 9000, 8000, and 7000 Series Desktop Processors, featuring DDR5 memory, PCIe 5.0 connectivity, multiple M.2 slots, WiFi 6, and 1Gb Ethernet. Please read this manual thoroughly before proceeding with installation to ensure proper setup and functionality.

2. Bezpečnostní informace

• Před dotykem jakýchkoli součástí vždy odpojte napájecí kabel ze zásuvky.
• Noste antistatický náramek nebo se často dotýkejte uzemněného kovového předmětu, abyste zabránili poškození součástí elektrostatickým výbojem (ESD).
• Součásti manipulujte za hrany, abyste se nedotkli citlivých částí.
• Zajistěte dostatečné větrání uvnitř skříně počítače, abyste zabránili přehřátí.
• Chraňte základní desku před vlhkostí a extrémními teplotami.
• Refer to the Proposition 65 Warning regarding potential chemical exposure.

3. Obsah balení

Ověřte, zda jsou v balení základní desky přítomny všechny položky:

• ASUS B650EM MAX Gaming WiFi Motherboard
• Wi-Fi anténa
• SATA kabely (množství se může lišit)
• M.2 Screw Packages (for M.2 SSD installation)
• Stručný průvodce / Uživatelská příručka

Image: Contents of the ASUS B650EM MAX Gaming WiFi motherboard box, showing the motherboard, Wi-Fi antenna, SATA cables, M.2 screws, and documentation.

4. Nastavení a instalace

4.1 Instalace CPU

The ASUS B650EM MAX Gaming WiFi motherboard uses an AMD AM5 Socket. Carefully align the CPU with the socket, ensuring the triangular markers on the CPU and socket match. Gently lower the CPU into the socket without applying force. Secure the CPU retention arm.

Image: Illustration of the AMD AM5 CPU socket, ready for processor installation.

4.2 Instalace paměti DDR5

This motherboard supports DDR5 memory modules. Open the clips on both ends of the DIMM slots. Align the memory module with the slot, ensuring the notch on the module matches the key in the slot. Press down firmly on both ends of the module until the clips snap into place.

Image: Illustration of DDR5 memory installation into the motherboard's DIMM slots.

4.3 Instalace disků M.2 SSD

The motherboard features three M.2 slots, including one PCIe 5.0 M.2 slot for high-speed storage. Locate an available M.2 slot, remove the standoff and screw. Insert the M.2 SSD at an angle, then gently push it down and secure it with the screw.

Image: Diagram highlighting the M.2 slot locations and supported sizes on the motherboard.

4.4 Instalace grafické karty

Insert your graphics card into the PCIe 5.0 x16 slot. The motherboard features a SafeSlot design for enhanced retention and shear resistance. Ensure the card is fully seated and secure it with a screw to the chassis.

Obrázek: Podrobný view of the PCIe 5.0 x16 SafeSlot, designed for secure graphics card installation.

4.5 Připojení napájení

Connect the 24-pin ATX main power connector and the 8-pin CPU power connector from your power supply to the corresponding ports on the motherboard. Ensure all power connections are secure.

4.6 Připojení periferií a předního panelu

Connect your storage devices to the SATA ports. Connect front panel USB, audio, and power/reset switch headers according to the motherboard manual. Install the Wi-Fi antenna to the rear I/O panel for wireless connectivity.

Image: Rear I/O panel of the motherboard with the Wi-Fi antenna attached, showing various ports.

Obrázek: Podrobný view of the rear I/O ports, highlighting connectivity options.

4.7 BIOS FlashBack

The BIOS FlashBack feature allows you to update the BIOS without a CPU or memory installed. Download the latest BIOS file od podpory ASUSu website, rename it as specified in the full manual, and save it to a USB flash drive. Insert the USB drive into the designated BIOS FlashBack USB port on the rear I/O panel and press the BIOS FlashBack button until the LED starts flashing. The process is complete when the LED turns off.

Image: Diagram showing the location of the BIOS FlashBack button and USB port.

5. Návod k obsluze

5.1 Initial Boot-up and BIOS/UEFI Access

Po sestavení systému jej zapněte. Stiskněte tlačítko DEL or F2 key during startup to enter the BIOS/UEFI setup utility. Here you can configure system settings, boot order, and monitor hardware status.

5.2 Instalace ovladače

Once your operating system is installed, install the necessary drivers. ASUS provides the Armoury Crate software, which can automatically detect and install drivers, utilities, and firmware updates. For initial setup, an Ethernet connection may be required to download Wi-Fi drivers if not pre-installed by your OS.

5.3 Synchronizované RGB osvětlení Aura

The motherboard supports Aura Sync RGB lighting with three Addressable RGB Gen 2 headers. Use the Armoury Crate software to customize lighting effects and synchronize them with other Aura Sync compatible devices.

5.4 Fan Xpert 2+ Cooling Control

Utilize ASUS Fan Xpert 2+ software, accessible through Armoury Crate, to monitor temperatures and control connected fans for optimal cooling performance and noise reduction.

Image: Motherboard diagram illustrating temperature monitoring points for CPU, GPU, and M.2 slots, managed by Fan Xpert 2+.

6. Údržba

6.1 Čištění

Regularly clean your PC case and motherboard components to prevent dust buildup, which can lead to overheating. Use compressed air to remove dust from heatsinks, fans, and other components. Ensure the system is powered off and unplugged before cleaning.

6.2 Aktualizace BIOSu a ovladačů

Keep your BIOS and drivers updated to ensure optimal performance, stability, and compatibility with new hardware or software. Check the ASUS support website periodically for the latest versions. Use the BIOS FlashBack feature or the EZ Flash utility within the BIOS for updates.

7. Řešení problémů

7.1 Žádné napájení / Žádné spuštění

• Ověřte, zda jsou všechny napájecí kabely (24pinový ATX, 8pinový CPU) bezpečně připojeny.
• Ujistěte se, že je napájení zapnuté a funguje správně.
• Reseat RAM modules. Incorrectly seated RAM is a common cause of no-boot issues.
• Check CPU installation and ensure the CPU cooler is properly mounted.
• If using a dedicated graphics card, ensure it is fully seated in the PCIe slot and has adequate power.

7.2 Periferní zařízení nebylo detekováno

• For storage drives (SATA/M.2), ensure they are correctly connected and enabled in the BIOS/UEFI.
• For USB devices, try different USB ports. Ensure front panel USB headers are correctly connected to the motherboard.
• For Wi-Fi/Bluetooth, ensure the antenna is connected and the latest drivers are installed via Armoury Crate or the ASUS support webmísto.

7.3 Q-LED Core (Diagnostic LEDs)

The motherboard features Q-LED Core diagnostic LEDs. These LEDs provide visual indicators for key components (CPU, DRAM, VGA, BOOT) during the power-on self-test (POST). If an issue is detected, the corresponding LED will remain lit, helping to identify the problematic component.

8. Specifikace

9. Záruka a podpora

9.1 Informace o záruce

This ASUS motherboard comes with a 3-year limited warranty. For specific terms and conditions, please refer to the warranty card included in your package or visit the official ASUS support webUschovejte si doklad o koupi pro případ reklamace.

9.2 Technická podpora

Pro technickou pomoc, stažení ovladačů nebo další informace navštivte oficiální stránky podpory ASUS. webwebu. Najdete zde nejčastější dotazy, průvodce řešením problémů a kontaktní informace na zákaznický servis.

Oficiální podpora ASUSu Webmísto: https://www.asus.com/support/