HITTIONA F2

HITTIONA F2 Hot Air Styler & Hair Styler Instruction Manual

1. Důležité bezpečnostní informace

Před použitím tohoto spotřebiče si pečlivě přečtěte všechny pokyny. Uschovejte si tento návod pro budoucí použití.

  • Vodní hazard: Nepoužívejte tento spotřebič v blízkosti van, sprch,asinnebo jiné nádoby obsahující vodu.
  • Elektrická bezpečnost: Always unplug the appliance immediately after use. Do not reach for an appliance that has fallen into water; unplug it immediately.
  • Tepelná bezpečnost: This appliance generates heat. Use caution when handling hot attachments. Always use the provided heat-protective glove when changing or handling hot attachments.
  • Děti: Uchovávejte mimo dosah dětí. Tento spotřebič není určen k používání osobami se sníženými fyzickými, smyslovými nebo duševními schopnostmi nebo s nedostatkem zkušeností a znalostí, pokud nejsou pod dohledem nebo pokud jim nebyly poskytnuty pokyny k používání spotřebiče osobou odpovědnou za jejich bezpečnost.
  • Větrání: Do not block air openings or place on a soft surface, such as a bed or couch, where air openings may be blocked. Keep air openings free of lint, hair, and the like.
  • Poškození: Nepoužívejte žádný spotřebič s poškozeným kabelem nebo zástrčkou, nebo pokud spotřebič nefunguje správně, upadl nebo byl jakkoli poškozen.

2. Obsah balení

Your HITTIONA F2 Hot Air Styler package includes the following items:

  • 1 x Main Styler Unit
  • 1 x Fast Drying Hair Blow Dryer Nozzle
  • 1 x Large Volumizing Brush
  • 1 x Round Brush for Loose Curls
  • 1 x Straightening Brush
  • 2 x 1.25" Auto-Wrap Air Curlers (Levý a Pravý)
  • 1 x Travel/Storage Bag
  • 1 x Heat-Protective Glove
HITTIONA F2 Hot Air Styler with all attachments laid out

Image: The HITTIONA F2 Hot Air Styler main unit and its six interchangeable attachments, including the fast drying nozzle, two curling barrels, two brush heads, and a straightening brush, neatly arranged.

3. Konec produktuview

Main Styler Unit

The main unit features a powerful 110,000 RPM brushless motor and delivers 23m/s high-speed airflow for efficient drying and styling. It includes intuitive controls for power, temperature, and airflow settings, along with a cool shot button to set your style.

Close-up of HITTIONA F2 main styler unit controls

Obrázek: Podrobný view of the HITTIONA F2 main styler unit, highlighting the power button, temperature and airflow controls, and the cool shot button.

Přílohy

  • Fast Drying Hair Blow Dryer Nozzle: Designed for quick pre-drying and initial moisture removal.
  • Large Volumizing Brush: Features frizz-reducing dual bristles to create lift, add volume and bounce, and smooth hair without pulling or tangling. Ideal for freshly-washed hair that is about 70% dry.
  • Round Brush for Loose Curls: Similar to the volumizing brush, this attachment is excellent for creating loose curls, adding volume, and styling bangs.
  • Rovný kartáč: Provides a smooth, frizz-free, and straight finish to your hair.
  • 1.25" Auto-Wrap Air Curlers (Left & Right): These barrels use directional airflow to automatically wrap and curl sections of hair, creating bouncy, voluminous curls without extreme heat. Two barrels are included for curling in different directions (clockwise and counter-clockwise).

4. Nastavení a instalace příslušenství

The HITTIONA F2 features an effortless one-click installation system for its attachments.

  1. Attaching an Attachment: Align the desired attachment with the main styler unit. Push the attachment onto the unit until it clicks securely into place. Ensure the lock symbol is engaged.
  2. Detaching an Attachment: Press the release button (indicated by a push symbol) on the main unit and gently pull the attachment off. Use the heat-protective glove if the attachment is hot.
Diagram showing how to attach and detach styler heads

Image: A visual guide demonstrating the simple push-and-click mechanism for attaching and detaching the styling heads from the main unit.

5. Návod k obsluze

Before styling, ensure your hair is towel-dried until it is damp, not dripping wet. For best results with volumizing and curling brushes, hair should be approximately 70% dry.

Obecný provoz

  1. Zapnutí/vypnutí: Use the main power switch on the handle to turn the appliance on or off.
  2. Upravte proudění vzduchu: Select your desired airflow speed (Low, Medium, High) using the dedicated switch.
  3. Upravit teplotu: Choose from 3 heat settings (120°F, 150°F, 190°F) to suit your hair type and styling needs.
  4. Funkce Cool Shot: Press and hold the cool air button for 10 seconds after styling a section to set the curl or style and enhance shine.
HITTIONA F2 main unit with controls for heat, speed, and cool shot

Image: The main styler unit displaying its controls for adjusting wind speed, temperature, and activating the one-button cold wind function.

Použití příloh

5.1. Fast Drying Hair Blow Dryer Nozzle

Use this nozzle to quickly remove excess water from your hair before styling with other attachments. Direct the airflow evenly over your hair until it is damp.

Woman using the fast drying hair blow dryer nozzle

Image: A woman using the fast drying hair blow dryer nozzle to quickly dry her hair, demonstrating the high-speed airflow.

5.2. Large Volumizing Brush

For maximum volume, use this brush on hair that is about 70% dry. Section your hair and place the brush at the roots. Gently lift and rotate the brush as you move it down the hair shaft. This technique helps create lift and adds significant volume.

Woman using the large volumizing brush for hair styling

Image: A woman demonstrating the use of the large volumizing brush to add lift and volume to her hair, showing the brush at the roots and mid-shaft.

5.3. Round Brush for Loose Curls

To achieve loose curls or style bangs, use this brush on damp hair. Wrap sections of hair around the brush, holding for a few seconds, then release. The dual bristles help to smooth and defrizz while adding a gentle curl.

Woman using the round brush to create loose curls

Image: A woman styling her hair with the round brush to create loose, bouncy curls, highlighting the brush's ability to add volume and shape.

5.4. Straightening Brush

For a sleek, straight look, use the straightening brush on damp or dry hair. Section your hair and slowly glide the brush from roots to ends. The brush is designed to minimize frizz and provide a smooth finish.

Woman using the straightening brush for smooth hair

Image: A woman using the straightening brush to achieve a smooth and straight hairstyle, demonstrating its effectiveness in reducing frizz.

5.5. 1.25" Auto-Wrap Air Curlers

Tyto curlers utilize directional airflow to wrap hair automatically. Use the left barrel for curls on the left side of your head and the right barrel for curls on the right side. Ensure your hair is damp pro optimální výsledky.

  1. Take a section of hair and hold it near the barrel.
  2. The air will automatically wrap the hair around the barrel.
  3. Hold for a few seconds to allow the curl tvořit.
  4. Press the cool shot button for 10 seconds to set the curl.
  5. Release the hair gently.
Woman using the auto-wrap air curlvytvořit curls

Image: A woman demonstrating the auto-wrap air curler, showing how hair is automatically drawn and curled around the barrel for bouncy results.

6. Údržba

Proper maintenance ensures the longevity and optimal performance of your HITTIONA F2 Hot Air Styler.

  • Čištění: Ensure the appliance is unplugged and completely cool before cleaning. Wipe the main unit and attachments with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte jednotku do vody.
  • Čištění filtru: Regularly check and clean the air inlet filter at the bottom of the main unit to prevent blockages and maintain airflow.
  • Skladování: Store the styler and its attachments in the provided travel/storage bag in a cool, dry place.

7. Řešení problémů

If you encounter any issues with your HITTIONA F2 Hot Air Styler, please refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Zařízení se nezapne.Not plugged in correctly; power switch off; power outlet malfunction.Zkontrolujte připojení k napájení; ujistěte se, že je vypínač zapnutý; zkuste jinou zásuvku.
Attachments do not secure properly.Attachment not aligned or pushed in completely; release button not fully disengaged.Ensure attachment is aligned and pushed until it clicks; check if release button is stuck.
Slabé proudění vzduchu nebo přehřátí.Air inlet filter is blocked; internal components overheating.Clean the air inlet filter; unplug and allow the unit to cool down before restarting.
Vlasy ne curling or styling effectively.Hair is too wet or too dry; incorrect attachment used; insufficient heat/airflow setting.Ujistěte se, že vlasy jsouamp (approx. 70% dry for brushes/curlers); select appropriate attachment and settings.

8. Specifikace

FunkceDetail
Číslo modeluF2
ZnačkaHITTIONA
Wattage1500 wattů
svtage120 voltů
Rychlost motoru110,000 ot./min
Rychlost proudění vzduchu23 m/s
Nastavení tepla3 (120°F, 150°F, 190°F)
Rychlosti proudění vzduchu3
Speciální funkceCool Shot Button, Negative Ion Technology
Kompatibilita typů vlasůVše
Typ materiáluKeramicko-turmalínový povlak
Rozměry produktu14 x 4 x 2 palce
Hmotnost položky1.5 kilogramu (3.31 libry)

9. Záruka a podpora

The HITTIONA F2 Hot Air Styler comes with an 18-month warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any product-related inquiries, please contact HITTIONA customer service.

Služby zákazníkům: Refer to the contact information provided on the product packaging or the official HITTIONA webweb s nejaktuálnějšími informacemi o podpoře.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.