Reloop RP-7 Professional 7-inch Turntable System User Manual

Zavedení

Thank you for choosing the Reloop RP-7 Professional 7-inch Turntable System. This manual provides essential information for the safe and efficient use of your new turntable. Please read these instructions carefully before operating the device and retain them for future reference. The Reloop RP-7 is designed for both casual listeners of 7-inch vinyl and professional DJs, offering high-quality performance and precision for 45s culture.

Bezpečnostní pokyny

• Napájení: Connect the turntable only to an AC outlet with the specified voltage (230 Volts). Ensure the power cord is not damaged or pinched.
• Voda a vlhkost: Do not expose the unit to rain, moisture, or excessive humidity. Do not place objects filled with liquids, such as vases, on the unit.
• Větrání: Zajistěte dostatečné větrání kolem jednotky. Neblokujte větrací otvory.
• Zdroje tepla: Udržujte jednotku mimo dosah zdrojů tepla, jako jsou radiátory, topná tělesa, sporáky nebo jiná zařízení (včetně amplifikátory), které produkují teplo.
• Čištění: Před čištěním odpojte napájecí kabel. Používejte pouze suchý hadřík.
• Servis: Nepokoušejte se tento výrobek opravit sami. Veškerý servis svěřte kvalifikovanému servisnímu personálu.
• Umístění: Umístěte otočný talíř na stabilní a rovný povrch, abyste zabránili vibracím a zajistili jeho správný provoz.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• Reloop RP-7 Professional 7-inch Turntable System
• RCA kabel
• Napájecí kabel
• Slipmat
• Protiváha
• Headshell with cartridge (may vary by region/package)
• Uživatelská příručka (tento dokument)

Konec produktuview

The Reloop RP-7 is a professional 7-inch direct-drive DJ turntable system, specifically designed for 45s vinyl enthusiasts and DJs. It combines robust construction with advanced features for precise playback and scratching.

Přední view of the Reloop RP-7 Professional 7-inch Turntable System, showcasintalíř, raménko a ovládací prvky.

Klíčové vlastnosti:

• High-Torque Direct-Drive Motor: Newly developed brushless DC motor with 2.5 kg/cm torque for reliable vinyl cueing and advanced scratching techniques.
• Precision Platter: Precision-machined, die-cast aluminum platter with finely tuned motor characteristics to minimize wow and flutter.
• Straight Copper Tonearm: Features internal rubber damping for superior vinyl tracking and minimal resonance.
• Height-Adjustable VTA Tonearm Base: Adapted from the RP-7000/8000 series for optimal tracking.
• Statically-Balanced Tonearm System: With hydraulic lift, eliminating the need for anti-skating.
• Universal Cartridge System Connection: Compatible with SME and headshell cartridges.
• Adjustable Tempo Range: ±8%, ±16%, or ±35% with a reset button.
• Více rychlostí přehrávání: Supports 33 1/3, 45, and 78 RPM.
• Detachable LED Light: Freely rotatable aluminum LED light for clear visibility in low-light conditions.
• Recessed Connection Terminal: Offers flush integration into a DJ setup with reliable protection for sensitive ports.
• Switchable Phono/Line Outputs: Gold-plated connectors prevent reliance on dedicated phono inputs.

The RP-7 features a newly developed brushless DC motor providing 2.5 kg/cm of torque for powerful and precise performance.

Key technical features of the Reloop RP-7, including pitch ranges, speeds, VTA tonearm, low-noise power supply, and SME cartridge connection.

Nastavení

1. Vybalení a umístění:

• Opatrně vyjměte všechny součásti z obalu.
• Place the turntable on a flat, stable, and vibration-free surface.

2. Platter Installation:

• Gently place the aluminum platter onto the spindle.
• Umístěte slipmat na talíř.

3. Tonearm and Cartridge Setup:

• Attach your preferred headshell with cartridge to the tonearm.
• Mount the counterweight onto the rear of the tonearm and adjust it to achieve proper tracking force for your cartridge. Refer to your cartridge manufacturer's recommendations for specific tracking force.
• Adjust the Vertical Tracking Angle (VTA) using the height-adjustable tonearm base to ensure the tonearm is parallel to the record surface.

4. Connecting to Audio System:

• Connect the supplied RCA cable from the turntable's output to your mixer or ampživější.
• The RP-7 features switchable phono/line outputs. Ensure the switch on the rear of the turntable is set correctly (PHONO for phono inputs, LINE for line inputs).
• Connect the ground wire from the turntable to the ground terminal on your mixer or ampzosilňovač pro minimalizaci hučení.

Zadní view of the Reloop RP-7, illustrating the recessed RCA and power connection terminals.

5. Připojení napájení:

• Connect the power cable to the turntable and then to a suitable 230V AC power outlet.

Návod k obsluze

1. Zapnutí/vypnutí:

• Turn the power knob clockwise to power on the unit. The LED will illuminate.
• Turn the power knob counter-clockwise to power off the unit.

2. Selecting Playback Speed:

• Stiskněte tlačítko 33, 45nebo 78 RPM buttons to select the desired playback speed for your vinyl record. The corresponding LED will light up.

3. Starting/Stopping Playback:

• Umístěte desku na talíř.
• Stiskněte tlačítko START/STOP tlačítko pro spuštění otáčení talíře.
• Lift the tonearm using the cue lever, position it over the desired track, and gently lower it onto the record.
• To stop, lift the tonearm, return it to the tonearm rest, and press the START/STOP tlačítko.

4. Pitch Adjustment:

• Use the pitch fader to adjust the playback speed within ±8%, ±16%, or ±35% ranges.
• Stiskněte tlačítko RESETOVAT button to instantly return the platter speed to 0% pitch adjustment.

5. Použití LED světla:

• Insert the detachable aluminum LED light into its designated port for improved visibility of the vinyl, especially in dimly lit environments.

The Reloop RP-7 provides excellent tracking accuracy and minimal resonances, crucial for both listening and DJ performance.

Údržba

1. Čištění jednotky:

• Před čištěním vždy odpojte napájení.
• K otření povrchu gramofonu použijte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky, vosky ani rozpouštědla.
• For the platter, use a slightly damp V případě potřeby osušte hadříkem a poté důkladně osušte.

2. Stylus Care:

• Pravidelně čistěte stylus měkkým kartáčkem určeným k čištění stylusu, a jemně jej kartáčujte zezadu dopředu.
• Replace the stylus when it shows signs of wear (typically after 500-1000 hours of playback) to prevent damage to your records.

3. Record Care:

• Keep your records clean and free of dust. Use a carbon fiber brush before each play.
• Desky skladujte svisle v obalech, abyste zabránili jejich deformaci.

Odstraňování problémů

If you encounter issues with your Reloop RP-7, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Reloop customer support.

Specifikace

Záruka a podpora

Reloop products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Reloop customer service through their official channels.

Více informací a podpůrných zdrojů naleznete na Reloop Store on Amazon or the official Reloop webmísto.