FCOB SP530E WiFi Bluetooth LED Controller and COB LED Strip Light User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your FCOB SP530E WiFi Bluetooth LED Controller and accompanying 6000K Daylight White COB LED Strip Light. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Bezpečnostní informace

• Zajistěte napájení objtage matches the product specifications (24V). Incorrect voltage může poškodit zařízení.
• Do not expose the controller or LED strip to moisture or extreme temperatures.
• Před jakýmkoli připojením nebo údržbou odpojte napájení.
• Avoid bending the LED strip sharply to prevent damage to the internal circuitry.
• Uchovávejte mimo dosah dětí.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• SP530E WiFi Bluetooth LED Controller
• 6000K Daylight White COB LED Strip Light (32.8FT)
• DC napájecí konektory
• Montážní spony a šrouby
• Malý šroubovák

Image 3.1: Contents of the FCOB SP530E LED Controller and Strip Light kit, including the controller, COB LED strip, power connectors, mounting clips, and a screwdriver.

4. Specifikace

• Model ovladače: SP530E
• Konektivita: WiFi, Bluetooth LE5.0
• Vstupní objemtage: DC 5-24V
• Výstupní kanály: 6-channel (PWM), SPI
• Maximální výstupní proud: 10A
• Pracovní teplota: -20 °C až 60 °C
• Typ LED pásku: COB LED páskové světlo
• Délka LED pásku: 32.8 stop (10 metru)
• LED hustota: 320 LED/metr
• Teplota barev: 6000K denní světlo bílá
• Úhel paprsku: 180°
• Ořezatelné: Every 1.97 inches (5cm) at marked lines
• Velikost DC zástrčky: Rozměr 5.5 mm x 2.1 mm

5. Nastavení a instalace

5.1 LED Strip Preparation

1. Měření a řezání: If a shorter length is required, cut the COB LED strip only at the designated cutting marks (usually indicated by a scissor icon or copper pads).

Image 5.1: Illustration showing correct and incorrect cutting points for the LED strip. Always cut along the marked lines to ensure functionality.

2. Čistý povrch: Ensure the mounting surface is clean, dry, and smooth for optimal adhesive performance.
3. Oloupejte a nalepte: Remove the backing from the adhesive tape on the back of the LED strip and firmly press the strip onto the desired surface.
4. Zajištění pomocí klipů: For added security, use the provided mounting clips and screws, especially for longer runs or uneven surfaces.

5.2 Zapojení regulátoru

The SP530E controller supports both PWM (non-addressable) and SPI (addressable) LED strips, including combined setups. Refer to the labels on the controller for correct wiring.

• PWM LED Strips (e.g., Monochrome, CCT, RGB, RGBW, RGBCCT): Connect the corresponding wires from your LED strip to the V+, R, G, B, CW, WW terminals on the controller. Ensure polarity is correct.
• SPI LED Strips (e.g., WS2811, WS2812B): Connect the Data (DAT) wire from your SPI strip to the DAT terminal on the controller. Connect the Ground (GND) wire to the GND terminal.
• Připojení napájení: Connect the DC power adapter (not included) to the DC Power Jack Socket (5.5mm x 2.1mm) on the controller. Ensure the power supply is rated for 24V and has sufficient current capacity for your LED strips.

Image 5.2: The SP530E controller is compatible with various PWM and SPI LED strip types, including single color, CCT, RGB, RGBW, and RGBCCT configurations. The image also shows the associated mobile application interface.

6. Provoz

6.1 Metody řízení

The SP530E controller offers multiple ways to manage your LED lighting:

• Kontrola APP: Connect via 2.4GHz WiFi or Bluetooth LE5.0 using the dedicated mobile application (Banlanx APP). This allows for comprehensive control over colors, effects, brightness, and scheduling.
• 2.4G RF Remote / Smart Panel Control: Compatible with separately purchased 2.4G RF touch remotes or wall-mounted smart panels for convenient local control.
• Hlasové ovládání třetí strany: Integrate with smart home systems like Amazon Alexa or Google Home for voice-activated control (requires initial setup through the mobile app).

Image 6.1: Visual representation of the three primary control methods: mobile application, 2.4G RF remote/smart panel (sold separately), and third-party voice assistants like Amazon Alexa and Google Home.

6.2 Mobile Application (Banlanx APP)

Download the Banlanx APP from your device's app store. Follow the in-app instructions to pair your SP530E controller via WiFi or Bluetooth.

• Dynamické režimy: Choose from various pre-programmed dynamic lighting effects.
• Plné barvy: Select any static color from a color wheel or adjust white light temperature.
• Hudební efekty: Synchronize lighting with music using player streaming, mobile microphone, or the controller's built-in microphone.
• DIY efekty: Create and customize your own lighting patterns and sequences.
• Časovače: Set schedules for turning lights on/off or activating specific modes.
• Nastavení jasu: Adjust the overall brightness level from 0% to 100%.

Image 6.2: Screenshots of the Banlanx mobile application, showcasing features such as dynamic modes, music synchronization, parameter settings, timers, and pattern customization.

Image 6.3: The SP530E controller's music effects feature, allowing synchronization of LED strip or matrix lighting with audio input from player streaming, mobile microphone, or the built-in microphone.

6.3 Ztlumení jasu

The controller allows for precise brightness adjustment of the connected LED strips. This can be controlled via the mobile application, RF remote, or voice commands.

Obrázek 6.4: Bývalýample of an LED strip installed in a living room setting, demonstrating various brightness levels (100%, 80%, 60%, 40%) achievable with the controller.

7. Údržba

• Čištění: Gently wipe the LED strip and controller with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Inspekce: Periodically check connections for any signs of wear or damage.
• Skladování: If storing the product for an extended period, ensure it is kept in a dry, cool environment away from direct sunlight.

8. Řešení problémů

9. Záruka a podpora

For warranty information and technical support, please refer to the FCOB official webnebo se obraťte na prodejce. Uschovejte si účtenku jako doklad o koupi.