Herdio HE-802B 8-Inch 600W Outdoor Passive Speakers Instruction Manual

1. Úvod

Thank you for choosing Herdio HE-802B 8-Inch 600W Outdoor Passive Speakers. These speakers are designed to deliver powerful, clear audio in large outdoor and commercial environments. Featuring an 8-inch woofer and a 1-inch tweeter, they provide a wide soundstage and robust performance. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.

Image 1.1: Herdio HE-802B 8-Inch Outdoor Passive Speakers.

2. Bezpečnostní informace

• Přečtěte si pokyny: Before installation and use, carefully read and understand all instructions.
• Zdroj napájení: Jsou to pasivní reproduktory a vyžadují externí... amplifier/power source. Ensure the amplifier's output matches the speaker's power handling capabilities (up to 300W peak per speaker, 80W RMS).
• Zapojení: Always connect speakers with the correct polarity (+ to + and - to -) to avoid phase issues and potential damage.
• Montáž: Use appropriate hardware and ensure the mounting surface can support the weight of the speakers. Improper installation can lead to injury or damage.
• Voděodolnost: The speakers have an IP44 waterproof rating, meaning they are protected against splashing water from any direction. They are suitable for outdoor use but should ne být ponořen ve vodě.
• Umístění: Avoid placing speakers near heat sources, direct sunlight for prolonged periods, or in areas with extreme temperatures.
• Čištění: Před čištěním odpojte napájení. Použijte měkký, suchý hadřík. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
• Servis: Do not attempt to service the speakers yourself. Refer all servicing to qualified personnel.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• Herdio HE-802B Outdoor Passive Speakers (2 units)
• Wall Mount Brackets (2 sets)
• Speaker Cables (2 units)
• Návod k obsluze (1 kus)

Image 3.1: Included items: two speakers, two sets of wall mount brackets, two speaker cables, and the instruction manual.

4. Konec produktuview

The Herdio HE-802B speakers are engineered for robust outdoor audio performance. Each speaker features:

• 8-Inch Injection Molded PP Cone Woofer: Provides deep and powerful bass response.
• 1-Inch PET Dome Tweeter: Delivers crisp and clear high frequencies.
• Marine-Grade ABS Housing: Ensures durability and resistance to outdoor elements.
• Vodotěsnost IP44: Chrání před stříkající vodou.
• Rustproof, UV-Resistant Grille and Brackets: Designed for long-lasting outdoor use.
• 180° Adjustable Swivel Brackets: Allows for precise sound direction.

Image 4.1: Internal components of the speaker, showing the 8-inch woofer and 1-inch tweeter.

Obrázek 4.2: Detailní view of the speaker's side profile with dimensions, the 180-degree adjustable wall mount bracket, and the push-in terminal block for wiring.

5. Nastavení a instalace

The Herdio HE-802B speakers are passive and require an external amplifier for operation. Follow these steps for proper installation and connection:

5.1 Montáž reproduktorů

1. Vyberte umístění: Select a suitable wall or surface that can securely hold the speaker's weight. Consider the desired sound coverage area.
2. Připevněte držáky: Securely fix the wall mount brackets to the chosen surface using appropriate screws and anchors (not included). Ensure the brackets are level and firmly attached.
3. Montáž reproduktorů: Slide the speakers onto the installed brackets.
4. Upravit úhel: Use the 180° adjustable swivel mechanism to direct the sound to your preferred listening area. Tighten the adjustment screws to secure the speaker's position.

Image 5.1: Visual guide for mounting the speakers: 1) Fixing bracket securely, 2) Mounting speaker, 3) Adjusting speaker orientation.

5.2 Wiring the Speakers to an Ampdoživotní

These speakers require an external amplifier. The video below demonstrates the wiring process.

1. Připravte dráty: Strip a small amount of insulation from the ends of the speaker cables.
2. Připojte se k Ampživější: Connect the speaker cables to the output terminals of your external amplifier. Ensure correct polarity: red wire to the positive (+) terminal and black wire to the negative (-) terminal.
3. Připojení k reproduktorům: Insert the other ends of the speaker cables into the push-in terminal blocks on the back of each Herdio speaker. Again, match positive (+) to positive (red terminal) and negative (-) to negative (black terminal).
4. Zabezpečená připojení: Ensure all wire connections are secure to prevent loose contacts or short circuits.

Image 5.2: Diagram illustrating how to connect the passive speakers to an external amplifier and power adapter. Note that the amplifier and power adapter are not included with the speakers.

6. Ovládání reproduktorů

Once the speakers are correctly installed and wired to an amplifier, you can begin operation.

6.1 Zapnutí a výběr zdroje

1. Zapnout Ampživější: Zapněte si externí ampživější.
2. Vyberte vstup: Vyberte vhodný vstupní zdroj na vašem amplifier (e.g., Bluetooth, AUX, USB) depending on how you wish to play audio.

6.2 Bluetooth Connection (if amplifier supports Bluetooth)

If your external amplifier has Bluetooth functionality, follow these steps to connect your device:

1. Aktivace režimu Bluetooth: Přepněte svůj amplifier to Bluetooth mode. It should enter pairing mode, indicated by an audible prompt or LED.
2. Povolení Bluetooth na zařízení: Na smartphonu, tabletu nebo jiném zařízení s podporou Bluetooth přejděte do nastavení Bluetooth.
3. Spárovat zařízení: Hledejte amplifier's Bluetooth name (e.g., "Herdio HCS528" or similar) in the list of available devices and select it to pair.
4. Potvrzení: Once connected, you will hear a confirmation sound from the speakers.

Podívejte se na svůj amplifier's manual for specific instructions on Bluetooth pairing and other input modes.

7. Údržba

• Čištění: Regularly wipe the speaker enclosures with a soft, damp tkanina. Vyhněte se použití abrazivních čisticích prostředků nebo rozpouštědel.
• Inspekce: Periodically check the mounting brackets and wiring connections for any signs of wear, corrosion, or looseness. Tighten connections as needed.
• Ochrana životního prostředí: While designed for outdoor use, prolonged exposure to extreme weather conditions (e.g., heavy snow, direct torrential rain) may reduce lifespan. Consider protective covers if speakers are exposed to harsh conditions for extended periods.

8. Řešení problémů

• Žádný zvuk:
  • Zajistěte ampje lifier zapnutý a je vybrán správný vstupní zdroj.
  • Zkontrolujte všechna připojení reproduktorových kabelů na obou amplifier and the speakers for proper polarity and secure contact.
  • Verify the volume on your amplifier and source device is turned up.
• Zkreslený zvuk:
  • Snižte hlasitost na vašem amplifikátor nebo zdrojové zařízení.
  • Zajistěte amplifier's power output is compatible with the speakers' power handling. Overpowering can cause distortion.
  • Check speaker wire connections for any frayed wires or short circuits.
• Problémy s připojením Bluetooth:
  • Ujistěte se, že vaše ampLiferier je v režimu párování Bluetooth.
  • Ujistěte se, že je na vašem zařízení zapnuté Bluetooth a že je v dosahu.
  • Zapomeňte na zařízení v telefonu/tabletu a zkuste spárování znovu.
• Nerovnoměrný zvuk:
  • Check individual speaker connections and ensure both speakers are receiving a signal.
  • Ověřte nastavení zůstatku na vašem ampživější.

9. Specifikace

Image 9.1: Summary of key product specifications for the Herdio HE-802B speakers.

Image 9.2: Detailed product dimensions for installation planning.

10. Záruka a podpora

Herdio products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official Herdio webmísto.