Návod k obsluze kolejnicové sady WAC Lighting Charge 8010 LED 27W se 3 světly

Zavedení

This manual provides detailed instructions for the safe installation, operation, and maintenance of your WAC Lighting Charge 8010 LED 27W 3-Light Track Kit. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: The WAC Lighting Charge 8010 LED 3-Light Track Kit, featuring three adjustable black LED track heads mounted on a 4-foot black track.

Bezpečnostní informace

VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení od jističe nebo pojistkové skříně. Pokud si nejste jisti postupem instalace, poraďte se s kvalifikovaným elektrikářem.

• Ujistěte se, že všechna elektrická připojení splňují místní předpisy a vyhlášky.
• Do not install this product in wet locations. This product is rated for dry locations only.
• Nepokoušejte se svítidlo upravovat. Jakékoli úpravy mohou vést ke ztrátě záruky a k ohrožení bezpečnosti.
• Handle LED components with care. Avoid touching the LED light source directly.
• This fixture is designed for 120V electrical systems.

Co je v krabici

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

Obrázek: Explodoval view showing all components included in the kit: a 4-foot H-track section, three 8010 LED track heads, one floating power feed, two end caps, and mounting hardware.

• 1x 4-foot H-Track Section
• 3x Charge 8010 LED Track Heads
• 1x Floating Canopy Power Feed
• 2x Track End Caps
• Montážní materiál (šrouby, hmoždinky)

Nastavení a instalace

Follow these steps to properly install your track lighting kit:

1. Připravte instalační prostor: Turn off power at the circuit breaker. Ensure the mounting surface is clean and structurally sound.
2. Install the Floating Canopy Power Feed: Attach the floating canopy power feed to a standard 120V electrical junction box. The power feed allows for flexible placement along the track.
3. Namontujte kolejnici: Secure the 4-foot H-track section to the ceiling or wall using the provided mounting hardware. Ensure the track is level and firmly attached.
4. Připojte napájení: Route the electrical wires from the junction box to the floating canopy power feed. Connect the wires according to standard electrical practices (black to black, white to white, ground to ground).
5. Install Track Heads: Insert the Charge 8010 LED track heads into the track. Důležité: The track heads have two contacts on one side. This side must face the groove within the track for proper electrical connection. Rotate the track head into position until it clicks securely.
6. Install End Caps: Place the end caps on both ends of the track section to cover exposed wiring and provide a finished appearance.
7. Obnovit napájení: Once all components are securely installed and connections are verified, restore power at the circuit breaker.

Image: Technical drawing illustrating the dimensions of the track kit, including the 48-inch track length and the individual track head measurements (approximately 2 3/8 inches diameter, 3 inches length, and 4 5/8 to 5 7/8 inches height from track).

Návod k obsluze

Nastavení teploty barev (CCT)

Each Charge 8010 LED track head features a 5-CCT selectable switch, allowing you to choose from five different color temperatures:

• 2700K (teplá bílá)
• 3000 K (měkká bílá)
• 3500K (neutrální bílá)
• 4000K (studená bílá)
• 5000 K (denní světlo)

To adjust the CCT, locate the small dial on the back of each track head. Rotate the dial to select your desired color temperature. This adjustment must be made individually for each track head.

Image: Close-up of the back of a track head showing the CCT control dial with settings for 2700K, 3000K, 3500K, 4000K, and 5000K. Adjacent is an illustration demonstrating the visual difference between various color temperatures.

Stmívání

The Charge 8010 LED track kit is fully dimmable. For smooth and continuous dimming performance down to 10%, use an electronic low voltage (ELV) or TRIAC (standard LED/CFL) dimmer switch (sold separately).

Aiming the Lights

Each track head offers 350-degree horizontal rotation and 90-degree vertical tilt, allowing you to direct light precisely where needed.

Image: Diagrams illustrating the 350-degree horizontal adjustment and 90-degree vertical adjustment capabilities of the track heads.

Vlastnosti

• High-Powered LED: Each track head delivers 850 lumens for a total of 2,550 lumens (3 heads).
• 5-CCT Selectable: Choose from 2700K, 3000K, 3500K, 4000K, or 5000K color temperatures.
• Stmívatelné: Compatible with ELV or TRIAC dimmers for smooth dimming down to 10%.
• Adjustable Aiming: 350-degree horizontal rotation and 90-degree vertical tilt for precise light direction.
• Energeticky účinný: Long-lasting LEDs with a rated life of 50,000 hours (LM-70).
• Snadná instalace: Floating canopy power feed allows for flexible placement and quick installation to a standard junction box.
• Škálovatelný design: Additional track heads or track components can be added as needed (sold separately).

Vysoce výkonná LED

Stmívatelné

Nastavitelný

Certifikace Energy Star

Image: Icons representing key features: High Power LED, Dimmable, Adjustable, and Energy Star certification.

Údržba

To ensure the longevity and optimal performance of your track lighting kit, follow these simple maintenance guidelines:

• Čištění: Před čištěním odpojte napájení. Použijte měkký, suchý nebo lehce navlhčený hadřík.amp cloth to wipe the surfaces of the track and track heads. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
• Inspekce: Periodically inspect the track and track heads for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician or WAC Lighting customer support.
• LED diody: The LED light sources are integrated and not user-replaceable. The long lifespan of the LEDs means replacement is generally not required.

Odstraňování problémů

If you encounter issues with your track lighting kit, refer to the following common problems and solutions:

Specifikace

Záruka a podpora

WAC Lighting products are designed for quality and durability. This product comes with an extended warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official WAC Lighting webmísto.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact WAC Lighting Customer Support:

• Webmísto: www.waclighting.com
• Služby zákazníkům: Viz webstránky pro kontaktní informace.