Aninerel 11000W 48V Hybrid Solar Inverter User Manual

1. Úvod

This manual provides essential information for the safe and efficient operation of your Aninerel 11000W 48V Hybrid Solar Inverter. This device is designed to convert 48V DC power from solar panels or batteries into 220V/230V AC power, suitable for various household and office applications. It features a built-in 160A MPPT solar controller and supports grid-tie functionality, allowing power to be fed into the mains. Please read this manual thoroughly before installation and use.

Obrázek 1: Aninerel 11000W 48V Hybrid Solar Inverter with WiFi module.

2. Bezpečnostní pokyny

Vždy dodržujte následující bezpečnostní opatření, abyste snížili riziko zranění nebo poškození střídače:

• Instalaci musí provádět kvalifikovaný personál.
• Ujistěte se, že veškeré kabely jsou správně dimenzovány a řádně zapojeny.
• Nerozebírejte měnič. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit.
• Chraňte měnič před hořlavými materiály, vlhkostí a přímým slunečním zářením.
• Zajistěte dostatečné větrání kolem střídače, aby nedošlo k jeho přehřátí.
• Always disconnect all power sources (PV, battery, AC grid) before performing any maintenance or wiring.

3. Konec produktuview

3.1 Klíčové vlastnosti

• Vysoký výstupní výkon: 11000W hybrid solar inverter, 48V DC to 220V/230V AC.
• Dual MPPT Controllers: Built-in 2 MPPT trackers (160A total charging current) for connecting two independent PV systems, each up to 5500W.
• Battery-Optional Operation: Can operate with or without batteries, powering loads directly from PV or AC grid.
• Výstup čisté sinusové vlny: Provides high-quality AC power suitable for sensitive electronics.
• Grid-Tie Capability: Can feed excess solar power into the mains grid.
• Integrated BMS Communication: Supports communication with compatible 48V 200AH/100AH batteries for optimized battery management.
• Komplexní ochrana: Includes short circuit, over-current, over-voltage, podpaltage, overload, charging, and over-temperature protection.
• Monitorování v reálném čase: LCD display and 3 LED indicators for system status, plus built-in WiFi for mobile app monitoring.
• Flexible Charging & Output Modes: Multiple configurable modes for power priority (PV, grid, battery).

Obrázek 2: Key specifications including 11000W rated power, 230Vac output, 50/60Hz frequency, 5500W*2 Max. PV array power, 60-500Vdc PV array MPPT voltage range, and 160A Max. charge current.

Obrázek 3: The inverter features built-in WiFi for real-time monitoring via a mobile application, available on Google Play and App Store.

Obrázek 4: The inverter provides a pure sine wave output, ensuring high-quality AC power for sensitive devices like computers, refrigerators, TVs, and water heaters.

3.2 Součásti a indikátory

Familiarize yourself with the inverter's external components, display, and indicators for proper operation.

Obrázek 5: Front panel features an LCD display, status indicator, charging indicator, fault indicator, and function buttons (ESC, UP, DOWN, ENTER). The rear panel includes PV1 input, PV2 input, AC input, Main out, Second out, RS485 port, WiFi antenna port, dry contact port, grounding terminal, battery negative/positive outlet holes, and a power on/off switch.

• LCD displej: Shows real-time system data and operating status.
• Indikátor stavu: Indikuje provozní stav střídače.
• Indikátor nabíjení: Zobrazuje stav nabíjení baterie.
• Indikátor poruchy: Illuminates when an error occurs, often accompanied by an error code on the LCD.
• Funkční tlačítka: Used for navigating menus and configuring settings.
• PV Inputs (PV1, PV2): Connections for solar panel arrays.
• AC vstup: Připojení k rozvodné síti.
• Main Out / Second Out: AC output connections for loads.
• Svorky baterie: Připojení pro 48V bateriový blok.
• WiFi Antenna Port: For wireless monitoring.
• Port RS485: For communication with external devices, including BMS.
• Suchý kontaktní port: Pro externí řídicí signály.

4. Nastavení a instalace

Proper installation is crucial for the inverter's performance and safety. Consult a qualified electrician for installation.

4.1 Místo montáže

• Mount the inverter vertically on a solid surface.
• Ensure sufficient clearance (at least 20 cm) around the inverter for proper airflow.
• Vyhněte se přímému slunečnímu záření, vysokým teplotám a vysoké vlhkosti.
• The installation environment should be free from corrosive gases and dust.

4.2 Zapojení kabeláže

Follow the wiring diagram carefully. All connections must be secure and correctly polarized.

Obrázek 6: Detailed wiring diagram showing connections for solar panels (PV array), utility grid, generator, 48V battery, 230V household load, and 220V household appliances. Note the maximum AC input voltage, AC output power, and maximum PV array power specifications.

• Připojení FV panelu: Connect solar panels to PV1 and PV2 inputs. Ensure the PV array voltage is within the 60-500V DC MPPT range and the open circuit voltage nepřesahuje 500 V DC.
• Připojení baterie: Connect the 48V battery bank to the battery terminals. The inverter is compatible with various battery types including AGM, GEL, FLD, LI, SLD, and USER-defined settings.
• Připojení AC vstupu: Connect the utility grid or a generator to the AC input.
• Připojení výstupu střídavého proudu: Connect your household loads to the Main Out and Second Out terminals.
• Základy: Ujistěte se, že je měnič řádně uzemněn.

Obrázek 7: The inverter is compatible with multiple battery types, including AGM, GEL, FLD, LI (Lithium), SLD, and user-defined settings, with a maximum battery charging current of 100A (AC + DC).

5. Provozní režimy

The Aninerel hybrid inverter offers flexible configuration options for charging and load priority.

5.1 Charging Priority Modes

These settings control how the battery bank is charged from different power sources.

• Priorita solární energie: The inverter prioritizes solar power for charging. AC input will only charge the battery bank when solar power is no longer available.
• Solar and AC Input: The inverter will charge the battery bank from both solar and AC power simultaneously.
• Pouze solární: The inverter will only charge the battery bank from available solar power.

5.2 Load Priority Modes

These settings determine how your appliances receive power.

• PV Output Priority: The inverter will prioritize solar power to supply the loads first. If solar input is not enough, it will compensate from the AC input.
• National Network Output Priority (AC Priority): The inverter will redirect the AC input to power all loads and will only use DC inputs (battery/PV) when AC input power is not available.
• Battery Output Priority (DC Priority): The inverter will prioritize inverting from solar first. If solar is not enough, it will invert from battery power. Only when battery power is low will it switch to AC input.

Obrázek 8: Visual representation of charging priority (Solar Priority, Solar and AC input, Solar Only) and load priority (Solar Priority, AC Priority, DC Priority) settings, which can be configured via the inverter's display.

6. Údržba

Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho měniče.

• Čištění: Periodically clean the inverter's exterior with a dry cloth. Ensure ventilation openings are free from dust and debris.
• Spojení: Každoročně kontrolujte všechna elektrická připojení, zda nejsou pevně utažená a zda nevykazují známky koroze.
• Prostředí: Zajistěte, aby provozní prostředí zůstalo v rámci specifikovaného rozsahu teploty a vlhkosti.
• Stav baterie: If using batteries, monitor their health and ensure they are properly maintained according to their manufacturer's guidelines.

7. Řešení problémů

The inverter's LCD display will show error codes if a fault occurs. Refer to the specific error code in the full product manual (if available) for detailed troubleshooting steps. General troubleshooting tips include:

• Bez napájení: Check all power connections (PV, battery, AC input). Ensure the power switch is ON.
• Přetížení: Reduce the connected load. The inverter has overload protection and may shut down.
• Přehřívání: Ensure adequate ventilation. Clean any dust from vents.
• Problémy s baterií: Zkontrolujte objem baterietage and connections. Ensure battery type settings are correct.
• Problémy s FV vstupem: Verify solar panel connections and ensure sufficient sunlight. Check PV array voltage.

If the problem persists after basic troubleshooting, contact Aninerel customer support or a qualified technician.

8. Specifikace

9. Záruka a podpora

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer, Aninerel. Keep your purchase receipt and product model number (ANJ-HHS-11000W-48V-WIFI) readily available when seeking support.