Transformers Age of the Primes Junkion Wreck-Gar Instruction Manual

Zavedení

This manual provides instructions for the assembly, operation, and care of your Transformers Age of the Primes Junkion Wreck-Gar Voyager Class action figure. This 7-inch (17.5 cm) figure converts between robot and trash truck modes.

Klíčové vlastnosti:

• 7-inch (17.5 cm) Voyager Class figure.
• Converts from robot to trash truck mode in 15 steps.
• Figure can be split into pieces to armor up other compatible figures (sold separately).
• Includes an articulating trash compactor arm accessory.
• Features articulation for various poses.

VAROVÁNÍ: Mohou se vytvářet malé části. Není vhodné pro děti do 3 let.

Image: The Junkion Wreck-Gar figure displayed in both robot and trash truck modes, with its product packaging.

Setup: Transformation

The Junkion Wreck-Gar figure converts between robot mode and trash truck mode in 15 steps. Refer to the visual guide below for the transformation sequence. Ensure all joints are properly aligned and clicked into place during each step to prevent damage.

Image: Detailed visual guide on the back of the product packaging illustrating the 15 steps required to convert the figure from robot to trash truck mode.

Režim robota

Image: The Junkion Wreck-Gar figure in its complete robot form, holding two blaster accessories.

Trash Truck Mode

Image: The Junkion Wreck-Gar figure fully transformed into its trash truck vehicle mode, viewed zepředu.

Provozní

Robot Mode Operation

In robot mode, the figure features multiple points of articulation, allowing for various poses. Attach the included blaster accessories to the figure's hands or designated ports. The trash compactor arm accessory can also be held as a weapon or shield.

Image: The Junkion Wreck-Gar figure in robot mode, demonstrating how accessories can be held.

Trash Truck Mode Operation

In trash truck mode, the articulating trash compactor arm accessory can be positioned as desired. Ensure all parts are securely locked for stable display or play.

Image: The Junkion Wreck-Gar figure in trash truck mode, highlighting the articulating trash compactor arm at the rear.

Armor Feature

The Junkion Wreck-Gar figure can be disassembled into several pieces. These pieces are designed to be attached to other compatible Transformers figures (sold separately) as armor, enhancing their appearance and playability.

Image: The Junkion Wreck-Gar figure in robot mode, utilizing a component of its vehicle form as an accessory, illustrating the modular design.

Údržba

To maintain the condition of your figure:

• Clean the figure with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Store the figure away from direct sunlight and extreme temperatures to prevent discoloration or material degradation.
• Handle moving parts gently during transformation to avoid breakage.

Odstraňování problémů

This action figure is a mechanical toy with no electronic components. If you encounter difficulty during transformation, carefully review the 15-step guide provided in the Setup section. Ensure all parts are correctly aligned before applying force. If a part appears stuck or damaged, do not force it. Contact customer support for assistance.

Specifikace

Záruka a podpora

This product is manufactured by Hasbro. For any questions regarding product defects, missing parts, or warranty information, please contact Hasbro customer service directly. Refer to the product packaging for specific contact details or visit the official Hasbro webmísto.