Návod k obsluze vysavače pro mokré a suché vysávání uwant D700

1. Důležité bezpečnostní pokyny

Please read all safety instructions carefully before using the uwant D700 Wet Dry Vacuum Cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• This appliance is for household use only. Do not use outdoors or on commercial surfaces.
• Neponořujte spotřebič do vody nebo jiných kapalin.
• Udržujte vlasy, volné oblečení, prsty a všechny části těla v dostatečné vzdálenosti od otvorů a pohyblivých částí.
• Use only uwant recommended attachments and accessories.
• Nepoužívejte k vysávání hořlavých nebo hořlavých kapalin, jako je benzín, ani je nepoužívejte v oblastech, kde se mohou vyskytovat.
• Nesbírejte nic, co hoří nebo kouří, jako jsou cigarety, zápalky nebo horký popel.
• Always turn off the appliance before connecting or disconnecting the brush roll or other accessories.
• Spotřebič skladujte uvnitř na suchém místě.

2. Konec produktuview

The uwant D700 is a versatile wet dry vacuum cleaner designed for efficient cleaning of various floor types. It features advanced technologies for superior performance and ease of use.

Figure 2.1: uwant D700 Wet Dry Vacuum Cleaner main unit.

Klíčové vlastnosti:

• Intelligent Stain Detection: Automatically adjusts suction and water flow based on dirt level.
• 180° Flat Design: Allows cleaning under low furniture with ease.
• 2mm Edge Cleaning: D-shaped brush head ensures thorough cleaning along edges and corners.
• Push-in Self-Cleaning Station: Automated 100°C hot water wash and 75°C hot air drying for the brush roll.
• Electrolyzed Water Sterilization: Generates electrolyzed water to eliminate 99.99% of germs without chemical disinfectants.
• Sací výkon 20,000 XNUMX Pa: Powerful suction for both wet and dry messes.
• Dlouhá výdrž baterie: Up to 45 minutes of runtime for cleaning areas up to 300 m².

Figure 2.2: The D-shaped rotating brush offers a 6 times wider cleaning surface and 0mm edge cleaning on 3 sides.

3. Nastavení

3.1 Vybalení a montáž

Carefully remove all components from the packaging. Ensure all parts are present before assembly.

1. Zasuňte rukojeť do hlavní části vysavače, dokud bezpečně nezacvakne.
2. Place the clean water tank and dirty water tank into their respective compartments.
3. Ensure the brush roll is correctly installed in the brush head.

Figure 3.1: Illustration of the assembly process, showing components being connected.

3.2 Počáteční nabíjení

Před prvním použitím vysavač plně nabijte.

1. Place the vacuum cleaner onto the self-cleaning station. The station is designed for easy push-in docking.
2. Connect the power adapter to the charging port on the station and plug it into a wall outlet.
3. The display will indicate charging status. A full charge typically takes approximately 4-5 hours.

Figure 3.2: The vacuum cleaner easily docks into its station with a single movement for charging and self-cleaning.

3.3 Naplnění nádrže na čistou vodu

The clean water tank supplies water for cleaning. For optimal performance, use tap water.

1. Vyjměte nádržku na čistou vodu z hlavní jednotky.
2. Open the tank cap and fill with clean tap water up to the MAX line.
3. Close the cap securely and reinsert the tank into the vacuum cleaner.

Figure 3.3: Filling the clean water tank with tap water.

4. Návod k obsluze

4.1 Zapnutí/vypnutí a výběr režimu

Press the power button on the handle to turn the vacuum cleaner on or off. Use the mode button to switch between cleaning modes.

• Inteligentní režim: The vacuum automatically detects dirt levels and adjusts suction power and water flow. Ideal for general cleaning.
• Výkonný režim: Zajišťuje maximální sací výkon a průtok vody i v silně znečištěných oblastech.
• Suchý režim: Suction only, suitable for picking up dry debris without water.

Figure 4.1: The intelligent dirt detection system automatically adjusts suction and water flow for different stain levels.

4.2 Techniky čištění

For best results, move the vacuum cleaner slowly forward and backward over the area to be cleaned.

• Under Low Furniture: Utilize the 180° flat design by tilting the vacuum cleaner back to reach under sofas, beds, and other low-clearance areas.
• Čištění hran: The D-shaped brush head is designed to clean within 2mm of edges, ensuring no spots are missed. Guide the vacuum along baseboards and furniture edges.
• Electrolyzed Water Function: The D700 automatically generates electrolyzed water for sterilization during cleaning. No additional disinfectants are needed.

Figure 4.2: The 180° flat design allows easy cleaning under low furniture and in tight corners.

Figure 4.3: The D-shaped rotating brush provides superior edge cleaning, reaching within 2mm of walls.

5. Údržba

Regular maintenance ensures optimal performance and extends the lifespan of your uwant D700.

5.1 Cyklus samočištění

After each use, it is recommended to run the self-cleaning cycle.

1. Place the vacuum cleaner on the self-cleaning station.
2. Press the self-clean button on the handle or station.
3. The station will perform a 100°C hot water wash of the brush roll, followed by 75°C hot air drying. This process helps prevent odors and bacterial growth.

Figure 5.1: The self-cleaning station performs a 100°C hot water wash and 75°C hot air drying for thorough brush maintenance.

Figure 5.2: The ultra-silent high-temperature drying chamber ensures quick and quiet drying of the brush roll.

5.2 Vyprázdnění a čištění nádrže na špinavou vodu

Empty the dirty water tank after each use to prevent odors and maintain hygiene.

1. Vyjměte nádrž na špinavou vodu z hlavní jednotky.
2. Otevřete víko nádrže a opatrně vylijte špinavou vodu a nečistoty.
3. Rinse the tank thoroughly with clean water. You can use the innovative deodorizing device to neutralize odors.
4. Před opětovným vložením nechte nádržku zcela vyschnout na vzduchu.

Figure 5.3: The innovative deodorizing device helps eliminate unpleasant odors from the dirty water tank.

5.3 Čištění kartáčového válce a filtru

Even with self-cleaning, occasional manual cleaning of the brush roll and filter is recommended.

1. Turn off the vacuum cleaner and remove the brush roll cover.
2. Remove the brush roll. Rinse it under running water to remove any tangled hair or debris. The brush roll is IPX6 waterproof.
3. Remove the HEPA filter from the dirty water tank. Tap it gently to remove dust or rinse it if heavily soiled. Ensure it is completely dry before reinstallation.
4. Po zaschnutí všechny díly znovu sestavte.

Figure 5.4: The IPX6 waterproof rotating brush can be easily rinsed for deep cleaning.

6. Řešení problémů

If you encounter any issues with your uwant D700, please refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact uwant customer support for assistance.

7. Specifikace

8. Záruka a podpora

The uwant D700 Wet Dry Vacuum Cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact uwant customer service. Contact information can typically be found on the official uwant webmístě nebo na obalu produktu.

Please have your model number (D700) and purchase date ready when contacting support.