Jonsbo N10 Mini-ITX PC Case User Manual

1. Úvod

The Jonsbo N10 Mini-ITX PC Case is designed for users seeking a compact, functional, and elegantly designed enclosure for minimalist PC systems. It is suitable for space-saving office PCs, quiet HTPCs (Home Theater Personal Computers), or compact NAS (Network Attached Storage) systems. This manual provides essential information for the proper assembly, operation, and maintenance of your Jonsbo N10 case.

Figure 1: Jonsbo N10 Mini-ITX PC Case in a typical desktop setup.

2. Bezpečnostní informace

• Před instalací nebo demontáží jakýchkoli součástí vždy odpojte napájecí kabel ze zásuvky.
• Se všemi součástmi zacházejte opatrně, abyste zabránili poškození statickou elektřinou. Zvažte použití antistatického náramku.
• Uchovávejte malé součástky a šrouby mimo dosah dětí.
• Zajistěte dostatečné větrání kolem skříně, abyste zabránili přehřátí.
• Nepokoušejte se upravovat kryt ani jeho součásti, mohlo by to vést ke ztrátě záruky a k bezpečnostním rizikům.

3. Obsah balení

Zkontrolujte prosím, zda jsou ve vašem balení obsaženy všechny následující položky:

• Jonsbo N10 Mini-ITX PC Case
• 2 x Pre-installed Cooling Fans
• Accessory box with screws and mounting hardware

Obrázek 2: Rozložené view showing the main components of the Jonsbo N10 case.

4. Nastavení a instalace

4.1 Konec komponentyview

The Jonsbo N10 case is designed for Mini-ITX motherboards and compact components. Familiarize yourself with the internal layout before beginning assembly.

Obrázek 3: Vnitřní view of the Jonsbo N10 case, illustrating component placement.

4.2 Instalace základní desky

1. Remove the side panels of the case.
2. Install your Mini-ITX motherboard into the designated area. Ensure the I/O shield is properly seated.
3. Zajistěte základní desku dodanými šrouby.
4. Install your CPU and CPU cooler. Note that the maximum CPU cooler height supported is 38 mm. This case is optimized for CPUs with integrated graphics (iGPU) and does not support dedicated graphics cards.

4.3 Instalace úložiště

The Jonsbo N10 supports up to four 2.5-inch SSDs or HDDs.

1. Locate the 2.5-inch drive bays. These are typically found on a removable bracket or directly on the chassis.
2. Mount your 2.5-inch SSDs or HDDs onto the bracket using the provided screws.
3. Secure the bracket back into the case.

Figure 4: Installation process for 2.5-inch storage drives.

4.4 Instalace napájecího zdroje

The case supports 1U-Flex power supplies up to 150 mm in length.

1. Identify the power supply mounting area, typically at the bottom of the case.
2. Slide the 1U-Flex power supply into its designated slot.
3. Secure the power supply with screws from the rear of the case.
4. Connect the necessary power cables to your motherboard and storage devices.

Figure 5: Power supply unit installation guide.

4.5 Fan Connections

The Jonsbo N10 comes with two pre-installed cooling fans. Connect their power cables to the appropriate fan headers on your motherboard.

4.6 Správa kabelů

Due to the compact nature of the case, careful cable management is crucial for optimal airflow and aesthetics. Route cables neatly using zip ties or Velcro straps where possible.

5. Návod k obsluze

Once all components are installed and secured, and all cables are connected:

1. Replace the side panels and secure them.
2. Připojte monitor, klávesnici, myš a další periferie.
3. Connect the power cable to the power supply and then to a wall outlet.
4. Press the power button on the front of the case to start your system.

Obrázek 6: Nahoře view of the Jonsbo N10, highlighting the power button and front panel.

6. Údržba

• Čištění: Regularly clean the exterior of the case with a soft, dry cloth. For dust accumulation inside, use compressed air to gently clear vents and components. Ensure the system is powered off and unplugged before cleaning.
• Kontrola ventilátoru: Periodically check the pre-installed fans for dust buildup or unusual noises. Clean them as needed to maintain optimal airflow.
• Větrání: Ensure that the case's ventilation holes are not obstructed to allow for proper heat dissipation.

7. Řešení problémů

• Systém se nezapíná: Double-check all power connections, including the power supply to the wall, the motherboard 24-pin connector, and the CPU power connector. Ensure the power button cable is correctly connected to the motherboard.
• Nadměrný hluk ventilátoru: While the case includes pre-installed fans, some users may find them audible. If fan noise is a concern, consider replacing the pre-installed fans with quieter aftermarket alternatives (e.g., Noctua fans). Ensure fans are free of dust and properly secured.
• Přehřívání: Verify that all fans are spinning correctly and that the case's ventilation is unobstructed. Ensure your CPU cooler is properly seated and making good contact with the CPU.
• Nefunkční USB porty: Check the internal USB 3.0 header connection from the front panel to the motherboard.

8. Specifikace

9. Záruka a podpora

The Jonsbo N10 PC Case comes with a 2letá záruka na produkt. For technical support, warranty claims, or further assistance, please contact your retailer or visit the official Jonsbo webwebu. Uschovejte si prosím doklad o koupi pro účely záruky.