Rosewill VMG750

Rosewill VMG 750W 80+ Gold Power Supply User Manual

Model: VMG750

1. Úvod

The Rosewill VMG 750W 80+ Gold Power Supply is a high-performance, fully modular unit designed to meet the demands of modern computing systems. Compatible with Intel ATX 3.0 & 3.1 standards and featuring a PCIe 5.1 12V-2x6 connector, this power supply delivers stable and efficient power with a focus on low noise and reliability.

Rosewill VMG 750W 80+ Gold Power Supply, front-side view

This image displays the Rosewill VMG 750W power supply from a front-side angle, highlighting its compact, fully modular design and the prominent '80 PLUS GOLD' certification badge.

Klíčové vlastnosti:

  • Intel ATX 3.0 & 3.1 Ready: Ensures compatibility with the latest motherboard standards.
  • Full Modular 80 PLUS Gold Certified: Provides high efficiency and allows for clean cable management.
  • PCIe 5.1 / Gen 5 12+4 Pin 12V-2x6 Cable: Dedicated connector for next-generation graphics cards, delivering up to 600W.
  • Up to 235% Power Excursion & 300% GPU Power Excursion: Designed to handle transient power spikes from high-performance components.
  • Optimized Thermal Control: Steel shell with large vents and a 120mm FDB fan enhance cooling performance while maintaining low noise.
  • Compact Build Ready: 140×150×86mm chassis (35% smaller than regular ATX PSUs) enables flexible small-form-factor integration.
  • Safety Shield: Six-protection suite (OCP/OPP/OTP/OVP/SCP/UCP) ensures complete system security.
ATX 3.1 Certified & PCIe 5.1 Ready Power Supply in a PC build

An illustrative image showing the Rosewill VMG 750W power supply installed within a modern PC case, highlighting its ATX 3.1 and PCIe 5.1 readiness for next-generation systems and graphics cards.

2. Nastavení a instalace

Before installing your new power supply, ensure your system is powered off and disconnected from the wall outlet. Always handle components with care and consider wearing an anti-static wrist strap.

Kroky instalace:

  1. Připravte si svůj případ: Remove the old power supply if applicable. Ensure there is adequate space for the VMG 750W.
  2. Montáž zdroje: Slide the power supply into its designated bay in your PC case. Secure it with the provided screws.
  3. Připojení modulárních kabelů: Identify the necessary cables for your components (motherboard, CPU, GPU, SATA devices). Connect them to the appropriate ports on the power supply. The VMG 750W is fully modular, allowing you to use only the cables you need for a cleaner build.
Modular cable connection ports on Rosewill VMG 750W Power Supply

Tento obrázek poskytuje jasný view of the fully modular cable connection ports on the Rosewill VMG 750W power supply, including dedicated sections for MB (Motherboard), CPU/PCI-E, PERIF/SATA, and the 12V-2x6 connector.

  1. Připojení ke komponentám: Route the connected cables to your motherboard, graphics card(s), and storage devices. Ensure all connections are firm and secure.
  2. Special GPU Connector: For next-generation graphics cards, utilize the vibrant orange 12V-2x6 connector. This dedicated cable delivers 600W directly to your GPU, eliminating the need for daisy-chaining.
600W Native Single-Cable Delivery from Rosewill PSU

This image focuses on the dedicated 12V-2x6 connector of the Rosewill VMG 750W power supply, illustrating its capability to deliver 600W of direct power to NVIDIA GeForce RTX 50 series GPUs, eliminating the need for daisy-chaining.

Diagram of included connectors for Rosewill VMG 750W Power Supply

A comprehensive diagram illustrating the various modular cables included with the Rosewill VMG 750W power supply, such as the 24 PIN Motherboard, 4+4 PIN CPU, 6+2 PIN PCI-E, 12+4 PIN PCI-E 5, SATA, and 4 PIN Molex connectors.

  1. Správa kabelů: Organize cables neatly to improve airflow and aesthetics within your PC case.
  2. Závěrečná kontrola: Double-check all connections before closing your PC case and reconnecting power.

3. Návod k obsluze

Once installed, the Rosewill VMG 750W power supply operates automatically, providing stable power to your system. It is designed for continuous operation within its specified limits.

Zapnutí/vypnutí:

  • To power on your system, ensure the power supply's main switch (located at the rear of the unit) is in the 'ON' position, then press your computer's power button.
  • To power off, shut down your operating system normally. For complete power disconnection, switch the power supply's main switch to 'OFF' and unplug the power cord from the wall outlet.

Provoz ventilátoru:

The VMG 750W features a 120mm Fluid Dynamic Bearing (FDB) fan, engineered for silent operation and efficient cooling. The fan speed is automatically controlled based on the power supply's temperature and load, ensuring optimal thermal performance without excessive noise.

Strana view of Rosewill VMG 750W Power Supply showing fan grille

This image shows the side of the Rosewill VMG 750W power supply, featuring the protective fan grille and the Rosewill branding, indicating the location of the 120mm FDB silent fan.

Space-Saving Design and Cooling features of Rosewill VMG 750W PSU

A visual representation of the Rosewill VMG 750W power supply's compact 140mm short-depth chassis, improved cooling with large vents, and whisper-quiet operation due to its 120mm rifle-bearing FDB fan.

4. Údržba

Proper maintenance ensures the longevity and optimal performance of your Rosewill VMG 750W power supply.

Čištění:

  • Odstranění prachu: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and internal components.
  • Frekvence: Cleaning frequency depends on your environment. In dusty conditions, more frequent cleaning may be necessary.

Warning: Always disconnect the power supply from the wall outlet and allow it to cool down before performing any cleaning or maintenance. Do not open the power supply casing, protože obsahuje vysoký objemtage components and voids the warranty.

5. Řešení problémů

If you encounter issues with your Rosewill VMG 750W power supply, refer to the following common problems and solutions:

Běžné problémy a řešení:

  • Bez napájení:
    • Ujistěte se, že je napájecí kabel bezpečně připojen k napájecímu zdroji i k elektrické zásuvce.
    • Verify the power supply's main switch is in the 'ON' position.
    • Check all internal cable connections (24-pin motherboard, CPU, GPU, SATA) are firmly seated.
    • Otestujte zásuvku ve zdi pomocí jiného zařízení, abyste se ujistili, že je pod proudem.
  • Nestabilita/pády systému:
    • Ujistěte se, že požadavky na napájení vašeho systému nepřekračují kapacitu 750 W zdroje.
    • Zkontrolujte, zda nejsou uvolněné kabelové spoje.
    • Verify proper ventilation around the PSU to prevent overheating.
  • Ventilátor se netočí:
    • The FDB fan is temperature-controlled and may not spin at low loads. This is normal operation.
    • If the system is under load and the fan is still not spinning, ensure no obstructions are blocking the fan.

Advanced Protection Suite:

The Rosewill VMG 750W is equipped with a comprehensive suite of protection features to safeguard your system:

  • OCP (Over Current Protection): Prevents damage from sudden current surges.
  • OPP (ochrana proti přepětí): Auto-adjusts power output during overloads.
  • OTP (Ochrana proti přehřátí): Guards against critical overheating.
  • OVP (Over Voltage ochrana): Stabilizes voltage spikes instantly.
  • SCP (ochrana proti zkratu): Neutralizes short-circuit risks.
  • UCP (Under Current Protection): Maintains performance during low voltage.

If any of these protections are triggered, the power supply may shut down to prevent damage. Disconnect power, wait a few minutes, and then re-evaluate your system's components and connections before attempting to power on again.

Advanced Protection Suite for Rosewill VMG 750W Power Supply

An image depicting a shield icon next to the Rosewill VMG 750W power supply, illustrating its advanced protection suite which includes OCP, OPP, OTP, OVP, SCP, and UCP.

6. Specifikace

Below are the detailed technical specifications for the Rosewill VMG 750W Power Supply:

Specifications label on Rosewill VMG 750W Power Supply

The product label on the Rosewill VMG 750W power supply, detailing AC input, DC output voltages and currents, Max. Total Power (750W), and various safety certifications.

AtributHodnota
Název modeluVMG750
Výstupní Wattage750 wattů
Form FactorATX
Návrh napájecího zdrojePlně modulární
Rozměry produktu (D x Š x V)5.51 x 5.9 x 3.38 palce
Hmotnost položky5.19 libry
Způsob chlazeníVzduch (120mm ventilátor FDB)
Kompatibilní zařízeníOsobní počítač
Typ konektoruATX, PCI Express (12V-2x6)
Certifikace účinnosti80 PLUS Gold
Datum první dostupnosti26. června 2025

7. Záruka a podpora

Informace o záruce:

The Rosewill VMG 750W Power Supply comes with a 5-letá záruka od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání. Uschovejte si prosím doklad o koupi pro případ uplatnění záruky.

Zákaznická podpora:

For technical assistance, troubleshooting, or warranty inquiries, please visit the official Rosewill website or contact Rosewill customer support through their dedicated channels. You can find more information and products at the Rosewill Store on Amazon.

© 2025 Rosewill. All rights reserved. Information is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.