AOLIKES 18650 2s1p Batterie

AOLIKES 18650 2s1p 2600mAh 7.4V Rechargeable Lithium-ion Battery User Manual

Model: 18650 2s1p Batterie | Brand: AOLIKES

1. Úvod

Welcome to the user manual for your AOLIKES 18650 2s1p 2600mAh 7.4V Rechargeable Lithium-ion Battery. This manual provides essential information for safe and effective use of your battery pack. Please read it thoroughly before initial use.

Obsah balení

  • 1 x 7.4V 2600mAh Li-ion Battery Pack with XH2.54/3p Plug Connector

2. Důležité bezpečnostní informace

Read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.

  • Kontrola polarity: Always verify the polarity of the battery pack with your device's requirements before connection. The red wire typically connects to the positive terminal (+), the black wire to the negative terminal (-), and the yellow (or white) wire to the NTC (Negative Temperature Coefficient thermistor). Incorrect connection can damage your device and the battery.
  • Ochranné vlastnosti: This battery includes built-in protection against over-voltage, pod-voltage, over-current, overcharging, overheating, and short circuits. Do not attempt to bypass or modify these safety features.
  • Nabíjení: Use only chargers specifically designed for 7.4V lithium-ion battery packs with a limited charge voltage 8.4V.
  • Skladování: Baterii skladujte na chladném a suchém místě mimo dosah přímého slunečního záření, zdrojů tepla a hořlavých materiálů.
  • Likvidace: Dispose of batteries according to local regulations. Do not dispose of in household waste or fire.
  • Poškození: Do not use the battery if it shows any signs of damage, swelling, leakage, or unusual odor.
  • Děti: Uchovávejte mimo dosah dětí.
Safety Warning and Wire Swap Guidelines

Image showing a safety warning icon and text emphasizing checking battery voltage and polarity before use, and guidelines for swapping connector wires.

3. Nastavení a instalace

Připojení baterie

Before connecting the battery pack to your device, ensure the device is powered off.

  1. Carefully align the XH2.54/3p connector of the battery pack with the corresponding port on your device.
  2. Gently push the connector into place until it is secure.
  3. Crucial Safety Tip: Compare the polarity of this new battery pack with your device's original battery or wiring diagram. The standard configuration is Red for Positive (+), Black for Negative (-), and Yellow (or White) for NTC.

Adjusting Connector Wiring (If Necessary)

If the polarity of the new battery's connector does not match your device's requirements, you may need to swap the wire positions within the connector. Proceed with caution and refer to the image below.

  1. Identify the wire(s) that need to be repositioned.
  2. Using a small, sharp object (like a jeweler's screwdriver or a pin), gently press down on the metal barb inside the connector housing, adjacent to the wire you wish to remove.
  3. While holding the barb down, carefully pull the wire out of the connector.
  4. Once removed, gently repair or lift the metal barb slightly if it was flattened too much, to ensure it will lock into place when reinserted.
  5. Reinsert the wire into the correct position in the connector until you hear or feel a click, indicating the barb has engaged.
  6. Repeat for any other wires that need repositioning.
  7. After re-wiring, double-check the polarity before connecting to your device.
Wire Swap Guidelines

Detailed visual guide showing steps to safely swap wires within the XH2.54/3p connector, including pressing down the metal barb, pulling the wire out, repairing the barb, and reinserting.

Battery with XH2.54/3p ConnectorXH2.54/3p Connector Close-up

Left: Side view of the AOLIKES 7.4V 2600mAh lithium-ion battery pack, highlighting the XH2.54/3p connector with red, black, and yellow wires. Right: Close-up view of the XH2.54/3p connector, showing its three pins and the standard wire colors.

4. Provoz

Nabíjení baterie

This 7.4V lithium-ion battery pack supports fast charging.

  1. Connect the battery pack to a compatible 7.4V lithium-ion battery charger.
  2. Ujistěte se, že výstupní hlasitost nabíječkytage is 8.4V (limited charge voltagE).
  3. Follow the instructions provided with your charger for proper charging procedures.
  4. Do not overcharge the battery. The built-in protection circuit will help prevent this, but it is good practice to monitor charging.

Použití baterie

The battery pack provides a nominal voltage of 7.4V and can deliver a maximum 5C output current, suitable for 8.4V power tools, mobile speakers, and other mobile devices.

  1. Once connected to your device, power on the device as per its own instructions.
  2. Monitor the device's performance. If you notice any unusual behavior (e.g., overheating, reduced power), disconnect the battery immediately.

5. Údržba

  • Čištění: Keep the battery and its connectors clean and dry. Use a soft, dry cloth to wipe away any dust or debris.
  • Inspekce: Periodically inspect the battery pack for any signs of physical damage, swelling, or corrosion on the terminals.
  • Skladování: For long-term storage, charge the battery to approximately 50-60% of its capacity. Store it in a cool, dry environment between 0°C and 25°C (32°F and 77°F). Avoid extreme temperatures.
  • Vyhněte se hlubokému vybití: While the battery has under-voltage protection, avoiding frequent deep discharges can prolong its lifespan.

6. Řešení problémů

If you encounter issues with your battery pack, refer to the following common problems and solutions.

ProblémMožná příčinaŘešení
Baterie se nenabíjíIncorrect charger, faulty charger, deeply discharged battery, poor connection.Ensure you are using a compatible 7.4V Li-ion charger. Check charger functionality. For deeply discharged batteries, some chargers may not initiate charging; try a specialized Li-ion recovery charger if available, or consult support. Verify secure connection.
Battery not powering deviceIncorrect polarity, loose connection, device fault, battery fault.Double-check connector polarity against device requirements. Ensure the connector is fully seated. Test the device with a known working power source. If the battery is suspected faulty, discontinue use.
Krátká provozní dobaBattery capacity degradation, high power draw from device, incomplete charging.Ensure the battery is fully charged. Reduce device power consumption if possible. If the battery is old, its capacity may have naturally degraded.
Přehřátí baterieOvercharging, short circuit, excessive load, internal fault.Disconnect immediately. Ensure proper charging. Check for short circuits in the device or battery. Reduce load. Discontinue use if overheating persists.

Pokud problémy přetrvávají i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu.

7. Technické specifikace

FunkceDetail
Typ baterieLithium-iontová dobíjecí baterie
Složení článků baterieLithium Ion
Konfigurace2S1P (2 cells in series, 1 parallel)
Jmenovitý svtage7.4V
Limited Charge Voltage8.4V
Kapacita baterie2600 XNUMX mAh
Moc19.24 Wh
Maximální výstupní proud5C
Typ konektoruXH2.54/3p
Hmotnost99 gramů
Číslo modelu18650 2s1p Batterie
VýrobceAOLIKES
AOLIKES 7.4V 2600mAh Lithium-ion Battery

Přední view of the AOLIKES 7.4V 2600mAh lithium-ion battery pack, showing its blue casing and label with model, capacity, and nominal voltage informace.

8. Záruka a podpora

Informace o záruce

This AOLIKES battery pack comes with a 30-day money-back guarantee. Please retain your proof of purchase for warranty claims.

Zákaznická podpora

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact AOLIKES customer support through the retailer where the product was purchased.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.