EBycco 5000W Dual Motor Ebike User Manual

1. Úvod

This manual provides essential information for the safe operation, assembly, and maintenance of your EBycco 5000W Dual Motor Electric Bike, Model EB7Pro. Please read this manual thoroughly before your first ride to ensure proper function and safety.

Figure 1: EBycco 5000W Dual Motor Ebike

The EBycco EB7Pro is designed for versatile riding across various terrains, featuring powerful dual motors, a long-range battery, full suspension, and hydraulic disc brakes. It is suitable for adults seeking a high-performance electric bicycle for commuting, off-road adventures, or recreational use.

2. Bezpečnostní informace

Your safety is paramount. Always wear a helmet and appropriate safety gear when riding. Adhere to all local traffic laws and regulations. Regular inspection and maintenance are crucial for safe operation.

2.1 Všeobecné bezpečnostní pokyny

• Perform a pre-ride inspection before each use, checking brakes, tires, battery, and all connections.
• Před jízdou se ujistěte, že je baterie bezpečně zajištěna na svém místě.
• Neprovozujte elektrokolo pod vlivem alkoholu nebo drog.
• Buďte si vědomi svého okolí a jezděte defenzivně.
• Pokud je to možné, vyhněte se jízdě za nepříznivých povětrnostních podmínek, jako je silný déšť nebo sníh.

2.2 Brzdový systém

The EBycco EB7Pro is equipped with precise dual hydraulic disc brakes for strong and responsive stopping power. Familiarize yourself with the braking system and practice braking in a safe area before riding in traffic.

Figure 2: Dual Hydraulic Disc Brake System

2.3 Systém osvětlení

The e-bike includes a bright front headlight and rear brake lights for enhanced visibility, especially during low-light conditions. Ensure these lights are functional before riding.

Figure 3: Safety Lighting System

3. Obsah balení

Upon receiving your EBycco EB7Pro, please verify that all components are present and undamaged. The package typically includes:

• EBycco EB7Pro Electric Bicycle (partially assembled)
• Lithiová baterie 52V 32Ah
• Nabíječka baterií
• Přední a zadní blatníky
• Front Headlight and Rear Brake Light
• Zadní nákladní regál
• Pedály (levý a pravý)
• Handlebar Riser (if included with your variant)
• Sada nářadí pro montáž
• Uživatelská příručka (tento dokument)

4. Nastavení a montáž

Your EBycco EB7Pro electric bike arrives approximately 85% pre-assembled. Complete installation typically takes about 20 minutes using the included tools and the following steps. For visual guidance, please refer to the installation video below.

4.1 Videonávod k montáži

Video 1: EBycco Electric Bike EB7Pro Installation Guide

This video provides a step-by-step walkthrough of the assembly process, including handlebar, front wheel, pedals, fenders, and battery installation.

4.2 Klíčové kroky montáže

1. Instalace řídítek: Remove the four screws from the handlebar stem, place the handlebar, and tighten the screws to secure its position.
2. Instalace držáku telefonu: Attach the phone holder to the handlebar and tighten its screws.
3. Připojit kabely: Carefully connect all necessary cables, ensuring secure connections.
4. Instalace předního kola: Remove the protective spacer from the front fork. Align the front wheel's disc brake rotor with the caliper and insert the axle into the fork dropouts. Tighten the axle bolts securely. Connect the front motor cable.
5. Instalace pedálů: Identify the left (L) and right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Ensure they are fully tightened.
6. Install Front Fenders & Headlight: Attach the front fender and headlight to the designated mounting points on the front fork. Secure them with the provided hardware.
7. Nainstalujte baterii: Slide the battery into its compartment on the bike frame until it clicks into place. Ensure it is locked for security.
8. Install Rear Rack: Attach the rear cargo rack to the mounting points on the rear frame and tighten all screws.
9. Install Rechargeable Tail Light: Secure the rechargeable tail light to the rear of the seat post or rack.

5. Návod k obsluze

The EBycco EB7Pro offers a versatile riding experience with multiple modes and assistance levels.

5.1 Zapnutí/vypnutí a zobrazení

To start the e-bike, long press the "M" button on the display unit. The display will show battery level, current speed, assistance level, odometer, and other relevant information. To power off, long press the "M" button again.

Obrázek 4: Ovládací prvky a displej na řídítkách

5.2 Jízdní režimy

The EB7Pro features six distinct riding modes to suit your preferences and riding conditions:

• Dual Motor Pure Electric: Engages both motors for maximum power and speed, controlled by the throttle.
• Single Motor Pure Electric: Engages one motor for efficient electric-only riding, controlled by the throttle.
• Asistent šlapání (PAS): Provides electric assistance as you pedal. There are five assistance levels to choose from.
• Režim chůze: Poskytuje asistenci při chůzi na kole při nízké rychlosti.
• Režim plavby: Maintains a constant speed without continuous throttle input.
• Režim na kole: No electric assistance; operates as a traditional bicycle.

You can switch between single motor and dual motor modes using the green button on the handlebar. The display settings can be adjusted to classify the e-bike as Class 1, Class 2, or Class 3.

Figure 5: Six Riding Modes

5.3 Řazení rychlostních stupňů

The professional 7-speed Shimano gear system allows for smooth and precise shifting, optimizing your pedaling effort across various terrains.

5.4 Nabíjení baterie

The 52V 32Ah (1664Wh) lithium battery is removable and lockable for convenient charging. Connect the charger to the battery and a power outlet. The charging indicator on the charger will show the charging status. Ensure the battery is fully charged before long rides.

6. Údržba

Regular maintenance ensures the longevity and safe operation of your EBycco EB7Pro.

6.1 Čištění

Pravidelně čistěte své elektrokolo pomocíamp hadříkem. Nepoužívejte vysokotlaké vodní trysky přímo na elektrické součástky.

6.2 Péče o pneumatiky

Maintain proper tire pressure as indicated on the tire sidewall. Regularly inspect tires for wear, punctures, or damage. The 26"x4.0 fat tires are designed for excellent grip on all terrains.

Figure 6: 26"x4.0 Fat Tires

6.3 Péče o baterii

• Před uložením na delší dobu baterii plně nabijte.
• Baterii skladujte na chladném a suchém místě.
• Abyste prodloužili životnost baterie, vyhněte se častému úplnému vybíjení.

6.4 Systém odpružení

The full suspension system, including a lockable and adjustable front fork and rear hydraulic shock absorber, significantly improves ride comfort. Periodically check the suspension components for proper function and adjust as needed.

Figure 7: Full Suspension System

7. Řešení problémů

This section addresses common issues you might encounter with your EBycco EB7Pro.

7.1 Běžné problémy a řešení

For persistent issues or error codes not listed, please contact customer support.

8. Specifikace

Obrázek 8: Přední strana View of Ebike

Obrázek 9: Strana View of Ebike

Obrázek 10: Zpět View of Ebike

9. Záruka a podpora

EBycco is committed to providing excellent customer service and product support.

9.1 Informace o záruce

Your EBycco EB7Pro electric bike comes with a Záruka 12 měsíců covering manufacturing defects. Please retain your original packaging for at least 1 month in case of a possible return or warranty claim.

9.2 Zákaznická podpora

For any questions, technical assistance, or replacement parts, please contact EBycco customer support. We offer 24-hour dedicated pre-sales and after-sales services.

E-mail: ebyccous@gmail.com

Our team aims to respond within 24 hours. You can also find replacement parts and additional resources on the official EBycco webmísto.