1. Úvod
This manual provides essential information for the safe installation, operation, and maintenance of the Traxon Allegro XB36 Outdoor LED Wall Washer Flood (Model: XB.W3.8370110). Please read these instructions thoroughly before installation and retain them for future reference.
The Allegro XB36 is a robust outdoor LED flood light fixture designed for wall washing applications, featuring a 3000K color temperature and 120V operation. Its IP66 rating ensures suitability for various outdoor environments.
Obrázek 1: Přední strana view of the Traxon Allegro XB36 LED Wall Washer Flood Light.
2. Bezpečnostní informace
- Elektrické nebezpečí: Installation and servicing must be performed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power before installation or maintenance.
- svtage: This fixture operates on 120 VAC. Ensure the power supply matches the fixture's requirements.
- Základy: Ujistěte se, že je svítidlo řádně uzemněno, abyste zabránili úrazu elektrickým proudem.
- Venkovní použití: The fixture is IP66 rated for outdoor use. Ensure all connections are sealed to maintain this rating.
- Teplota: Do not operate the fixture outside its specified ambient temperature range.
- Zacházení: Handle the fixture with care. Avoid dropping or subjecting it to severe impact.
- Světelný zdroj: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye strain or damage.
3. Obsah balení
Po vybalení ověřte, zda jsou všechny součásti přítomny a nepoškozené:
- Traxon Allegro XB36 Outdoor LED Wall Washer Flood Fixture (XB.W3.8370110)
- Montážní konzola (předmontovaná nebo samostatná)
- Návod k použití (tento dokument)
Note: Mounting hardware (screws, anchors) may not be included and should be selected based on the mounting surface.
4. Nastavení a instalace
4.1 Montáž svítidla
- Vyberte umístění: Choose a suitable mounting location that can support the weight of the fixture and provides the desired light coverage. Ensure the surface is stable and secure.
- Pozice závorky: If the mounting bracket is separate, attach it to the desired surface using appropriate screws and anchors (not supplied). If pre-attached, mark the drilling points.
- Bezpečné upevnění: Securely attach the fixture to the mounting surface using the integrated bracket. Adjust the angle of the fixture as needed for optimal light direction.
4.2 Elektrické připojení
The Allegro XB36 features 'IN' and 'OUT' ports for power connection and daisy-chaining multiple units. Ensure power is disconnected before proceeding.
Obrázek 2: Zadní view of the fixture, highlighting the 'IN' and 'OUT' power connection ports.
- Odpojení napájení: Turn off the main power supply at the circuit breaker before making any electrical connections.
- Připojte vstupní napájení: Connect the 120 VAC power supply cable to the 'IN' port of the fixture. Ensure a watertight seal using the provided cable glands.
- Řetězové zapojení (volitelné): If connecting multiple fixtures, use a suitable cable to connect the 'OUT' port of the first fixture to the 'IN' port of the next fixture. Observe maximum load limits for the circuit.
- Zabezpečená připojení: Ensure all cable glands are tightened securely to maintain the IP66 rating and prevent water ingress.
Obrázek 3: Zadní view of the fixture with power cables properly connected to the 'IN' and 'OUT' ports.
Important: All wiring must comply with local electrical codes and regulations.
5. Návod k obsluze
- Zapnutí: Once installation is complete and all connections are secure, restore power to the circuit. The fixture should illuminate.
- Stmívání: The Allegro XB36 supports phase-cut dimming. Use a compatible 120V phase-cut dimmer switch (not supplied) to adjust the light output intensity.
- Úhel paprsku: The fixture provides a 7° light distribution, ideal for focused wall washing effects.
- Nastavení: The mounting bracket allows for angular adjustment of the fixture to direct the light as desired. Ensure adjustment screws are tightened after positioning.
6. Údržba
The Traxon Allegro XB36 is designed for minimal maintenance due to its durable construction and IP66 rating. However, periodic checks are recommended.
- Čištění: Pravidelně čistěte objektiv a pouzdro měkkým hadříkemamp hadříkem odstraňte nečistoty, prach nebo nečistoty, které se mohou hromadit a ovlivňovat světelný výkon. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Inspekce: Annually inspect the fixture, mounting hardware, and electrical connections for any signs of wear, corrosion, or damage. Ensure all cable glands remain tight.
- Opravy: Do not attempt to repair the fixture yourself. Contact qualified service personnel for any repairs or internal maintenance.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Svítidlo nesvítí. | No power supply; loose electrical connection; faulty fixture. | Check circuit breaker and power source. Verify all electrical connections are secure. If problem persists, contact support. |
| Světelný výstup je nekonzistentní nebo bliká. | Incompatible dimmer switch; loose connection; power fluctuations. | Ensure a compatible phase-cut dimmer is used. Check electrical connections. Consult an electrician for power supply issues. |
| Water ingress inside the fixture. | Improperly sealed cable glands or damaged housing. | Immediately disconnect power. Inspect cable glands and housing for damage. Contact support for repair or replacement. |
8. Specifikace
- Model: XB.W3.8370110
- Značka: Traxon
- Vstupní objemtage: 120 VAC
- Wattage: 44 wattů
- Lumen výstup: 2631 XNUMX lumenů
- Teplota barev (CCT): 3000 tis
- Distribuce světla: 7°
- Stmívání: Phase Cut Dimmable
- IP hodnocení: IP66 (pro venkovní použití)
- Konstrukce: Aluminum/Glass
- Dokončit: Černý
- Hmotnost položky: 13.14 libry (5.96 kg)
- Rozměry produktu: 9 x 5.3 x 11.3 palce (22.86 x 13.46 x 28.7 cm)
- Výrobce: Osram
9. Informace o záruce
Warranty terms and conditions for the Traxon Allegro XB36 are typically provided at the point of purchase or can be found on the official Traxon website. Please retain your proof of purchase for warranty claims. For specific details regarding your product's warranty, refer to the documentation included with your purchase or contact the manufacturer directly.
10. Podpora
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Traxon dealer or the manufacturer's customer support. Provide your product model number (XB.W3.8370110) and a detailed description of the issue when seeking support.