Zavedení
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your SYLVOX Mobile TV Floor Stand. This heavy-duty rolling TV stand is designed for 65-75 inch flat or curved televisions, supporting a maximum load of 132 lbs (60 kg). It features lockable wheels for mobility and stability, universal VESA compatibility, and integrated cable management.
Před instalací a použitím si prosím pečlivě přečtěte tento návod k obsluze, abyste zajistili bezpečný a správný provoz.
Bezpečnostní informace
- Nosnost: Do not exceed the maximum load capacity of 132 lbs (60 kg). Overloading can cause instability and potential injury.
- Velikost televizoru: This stand is designed for 65-75 inch TVs. Ensure your TV's size and weight are within the specified limits.
- Kompatibilita VESA: Verify your TV's VESA mounting pattern is within the supported range (200x200mm to 1200x600mm).
- Shromáždění: Assemble the stand on a soft, clean surface to prevent scratches. Ensure all screws are tightened securely before mounting the TV.
- Stabilita: Always engage the locking wheels when the stand is in a stationary position to prevent accidental movement.
- Hnutí: When moving the stand, ensure the TV is securely attached and move slowly and carefully, especially over uneven surfaces.
- Děti a domácí mazlíčci: Keep children and pets away from the stand during assembly and ensure the TV is securely mounted to prevent tipping.
Obsah balení
Zkontrolujte prosím, zda jsou všechny součásti přítomny a nepoškozené. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.
- Main Frame Components (Base, Vertical Columns, Crossbars)
- Držáky na TV
- Lockable Caster Wheels (x4)
- Hardware Kit (various screws, washers, spacers for assembly and TV mounting)
- Cable Management Box/Clips
- Assembly Tools (e.g., Allen wrench, small spanner)
- Návod k použití
Nastavení a montáž
Pro správnou montáž pečlivě dodržujte tyto kroky. Montáž televizoru doporučujeme ve dvou osobách.
Step 1: Assemble the Base and Vertical Columns
- Attach the caster wheels to the base legs. Ensure two of the wheels are lockable and positioned as per the diagram.
- Connect the vertical support columns to the base using the provided screws and tools.
- Secure any crossbars or shelves to the vertical columns as indicated in the assembly diagram.
Image: Initial assembly of the stand's base and vertical supports.
Step 2: Attach TV Mounting Brackets to Your TV
- Opatrně položte televizor displejem dolů na měkký, čistý povrch.
- Identifikujte montážní otvory VESA na zadní straně televizoru.
- Vyberte z dodané sady vhodné šrouby, podložky a distanční podložky, které odpovídají standardu VESA vašeho televizoru.
- Attach the TV mounting brackets to the back of your TV, ensuring they are level and securely fastened. Do not overtighten.
Image: Diagram showing VESA mounting hole patterns and bracket attachment.
Krok 3: Namontujte televizor na stojan
- With assistance, carefully lift the TV and hook the attached mounting brackets onto the main frame of the stand.
- Ujistěte se, že je televizor vystředěný a vodorovný.
- Secure the TV to the stand using the safety screws or locking mechanisms on the brackets.
Instalační video průvodce
Video: Official SYLVOX Rolling TV Stand Installation Guide. This video demonstrates the step-by-step assembly process for the TV stand.
Návod k obsluze
Mobilita a stabilita
The stand is equipped with four heavy-duty caster wheels for easy movement. Two of these wheels are lockable to ensure stability when the stand is stationary.
- Přesunout: Unlock the two lockable wheels by flipping their levers. Gently push the stand to your desired location.
- Zabezpečení: Once in position, engage the locks on the two lockable wheels to prevent unintended movement.
Image: Close-up of lockable casters and illustration of stand mobility.
Správa kabelů
Utilize the integrated cable management features to keep your setup tidy and prevent cable tangles.
- Route TV and device cables through the designated cable clips or channels on the stand's frame.
- Use the compact storage box (if included) to house small streaming devices or remote controls, keeping them out of sight.
Obrázek: Přample of cables neatly routed through the stand's frame.
Údržba
- Čištění: Otřete stojan měkkým, suchým hadříkem. Na odolné skvrny použijte lehceamp hadříkem a jemným čisticím prostředkem a poté důkladně osušte. Nepoužívejte abrazivní čisticí prostředky.
- Kontrola hardwaru: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte.
- Pojezdová kola: Keep the caster wheels free of debris (hair, dust, etc.) to ensure smooth rolling. Lubricate if needed.
- Podmínky prostředí: While the stand is robust, prolonged exposure to extreme weather conditions (e.g., heavy rain, direct sunlight for extended periods) may affect its finish and longevity. If used outdoors, consider covering it when not in use.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stojan je nestabilní nebo se kymácí. | Screws are loose; TV is too heavy or not centered; uneven floor. | Check and tighten all assembly screws. Ensure TV weight is within limits and centered. Move to a level surface or use shims if necessary. |
| Kolečka se neotáčejí hladce. | Debris caught in wheels; wheels are locked. | Clear any debris from the wheels. Ensure lockable wheels are in the unlocked position. |
| TV does not fit the mounting brackets. | Nesprávný vzor VESA; použité nesprávné šrouby/distanční podložky. | Verify your TV's VESA pattern matches the stand's compatibility (200x200mm to 1200x600mm). Use the correct screws and spacers from the hardware kit. |
| Chybějící díly nebo poškozené komponenty. | Chyba balení nebo poškození při přepravě. | Contact SYLVOX customer support immediately for assistance. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | SYLVOX |
| Model | B0FD3C5CFN |
| Typ montáže | Montáž na podlahu |
| Typ pohybu | Rotate (implies swivel, not full rotation) |
| Materiál | Legovaná ocel |
| Barva | Černý |
| Kompatibilní zařízení | Televize |
| Minimum Supported Screen Size | 60 palce |
| Maximum Supported Screen Size | 120 palce (Note: Product title specifies 65-75 inches, but specifications list up to 120 inches. User should verify VESA for larger TVs.) |
| Maximální nosnost | 132 lb (60 kg) |
| Kompatibilita VESA | 200x200mm až 1200x600mm |
| Výrobce | Kontech |
Image: Technical drawing showing the dimensions of the TV stand.
Záruka a podpora
Informace o záruce
This SYLVOX TV Floor Stand comes with a 1-letá záruka from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or exceeding the specified weight capacity.
Pro uplatnění záruky si prosím uschovejte doklad o koupi.
Zákaznická podpora
If you encounter any issues during assembly or operation, or if you have questions about your product, please contact the seller, FutureIntelligence, through your purchase platform. They can provide assistance and guidance.
For general inquiries about SYLVOX products, you may visit the official SYLVOX store on Amazon: SYLVOX Amazon Store