VEDINDUST KVM HDMI Switch 2x2 for Dual Monitors (8K60Hz/4K120Hz) User Manual

Zavedení

This manual provides detailed instructions for setting up and operating your VEDINDUST KVM HDMI Switch 2x2. This device allows you to control two computers or laptops using a single set of keyboard and mouse, while sharing two monitors and up to four USB devices. It supports high resolutions up to 8K@60Hz and 4K@120Hz, with backward compatibility for lower resolutions. Please read this manual thoroughly before use to ensure proper installation and functionality.

Obsah balení

Ověřte prosím, zda jsou ve vašem balení obsaženy všechny níže uvedené položky:

• 1 x VEDINDUST KVM HDMI Switch 2x2
• 1 x Desktop Control (Wired Remote)
• 2 x USB 3.0 A to USB-C Cables
• 1 x napájecí adaptér DC12V
• 1 x Uživatelská příručka

Image: Contents of the VEDINDUST KVM HDMI Switch package, showing the KVM switch unit, a wired desktop controller, two USB-A to USB-C cables, a DC12V power adapter, and a printed user manual.

Konec produktuview

Přední panel

Image: The front panel of the KVM switch, highlighting two USB 2.0 ports (typically for mouse and keyboard), two USB 3.0 ports (for high-speed data devices like hard drives or flash drives), a 'Select' button for switching between PCs, a 'Control' port for the wired desktop controller, and an LED indicator for the active PC.

• USB 2.0 Ports (1, 2): For connecting low-speed USB devices such as mouse and keyboard.
• USB 3.0 Ports (3, 4): For connecting high-speed USB devices like external hard drives or flash drives.
• Vybrat tlačítko: Stisknutím přepínáte mezi PC1 a PC2.
• LED Indicator (PC1, PC2): Illuminates to show which PC is currently active.
• Řídicí port: Connects to the wired desktop controller for remote switching.

zadní panel

Image: The back panel of the KVM switch, displaying the DC12V power input, an ON/OFF switch, two input sections labeled 'PC1 IN' and 'PC2 IN'. Each PC input section includes a USB-C port, HDMI1, and HDMI2 ports. Additionally, there are two HDMI output ports labeled 'OUT1' and 'OUT2' for connecting monitors.

• DC 12V: Port napájení.
• Přepínač ON/OFF: Power toggle for the KVM switch.
• PC1 IN / PC2 IN: Each input section includes:
• USB-C: For data transfer from the computer to the KVM. Note: This USB-C port does not support video transfer.
• HDMI1 / HDMI2: HDMI video inputs from the computer. Both HDMI1 and HDMI2 must be connected to the same computer for dual monitor output from that computer.
• OUT1 / OUT2: HDMI video outputs to connect to your monitors.

Pokyny pro nastavení

Follow these steps to connect your KVM HDMI Switch:

1. Vypínací zařízení: Před jakýmkoli připojením se ujistěte, že jsou všechny počítače a monitory vypnuty.
2. Připojení monitorů: Connect your two monitors to the KVM's OUT1 a OUT2 HDMI porty pomocí HDMI kabelů.
3. Připojení počítače PC1:
   • Connect the USB-C cable from PC1 to the KVM's PC1 IN USB-C přístav.
   • Connect two HDMI cables from PC1's video outputs to the KVM's Vstup PC1 HDMI1 a Vstup PC1 HDMI2 porty.
4. Připojení počítače PC2:
   • Connect the USB-C cable from PC2 to the KVM's PC2 IN USB-C přístav.
   • Connect two HDMI cables from PC2's video outputs to the KVM's Vstup PC2 HDMI1 a Vstup PC2 HDMI2 porty.

   Důležitá poznámka: For dual monitor output from a single PC, both HDMI1 and HDMI2 inputs for that specific PC must be connected. Ensure your computers support dual monitor output. The USB-C ports on the KVM are for data transfer only and do not support video.

5. Připojení USB periferií: Connect your mouse and keyboard to the KVM's USB 2.0 ports (1, 2) on the front panel. Connect any other USB devices (e.g., external hard drives, flash drives) to the KVM's USB 3.0 ports (3, 4).
6. Připojení kabelového dálkového ovladače (volitelné): Plug the wired desktop controller into the Řízení port on the KVM's front panel.
7. Připojte napájení: Plug the DC12V power adapter into the KVM's DC 12V port and then into a power outlet.
8. Zapnutí: Turn on the KVM switch using the ON/OFF switch on the back panel, then power on your monitors and computers.

Image: A comprehensive connection diagram illustrating how to set up the KVM switch. It shows two PCs connected via USB-C and dual HDMI cables to the KVM's input ports. Two monitors are connected to the KVM's HDMI output ports. A mouse, keyboard, and other USB devices are connected to the KVM's front USB ports. The KVM is powered by a DC12V adapter, and a wired desktop controller is also connected.

Návod k obsluze

Přepínání mezi počítači

You can switch between PC1 and PC2 using one of the following methods:

• Tlačítko na předním panelu: Stiskněte tlačítko Vybrat button on the front panel of the KVM switch. The LED indicator will change to show the currently active PC (PC1 or PC2).
• Drátový stolní ovladač: If connected, press the button on the wired desktop controller to switch between PC1 and PC2. This allows for convenient switching if the KVM is placed out of reach.

Poznámka: Hotkey switching via keyboard shortcuts is not supported by this KVM switch.

Image: A visual guide on switching between PC1 and PC2. It shows a close-up of a hand pressing the 'Select' button on the KVM's front panel, and an image of the wired desktop controller, both used for switching the active computer.

Display Working Modes

Přepínač KVM podporuje dva primární režimy zobrazení, které jsou konfigurovány v operačním systému počítače:

• Rozšířený režim: This mode allows your two monitors to display different content, extending your desktop across both screens. One monitor acts as the main screen, and the other as an extended screen.
• Duplicate (Mirror) Mode: In this mode, both monitors display the exact same content, mirroring your main screen.

To switch between these modes, adjust your display settings within your computer's operating system (e.g., Windows Display Settings or macOS System Preferences). Ensure your computer supports dual or multiple monitors to utilize these modes effectively.

Image: A diagram showing two display working modes. The 'Extend' mode depicts two monitors showing different parts of a desktop, while the 'Duplicate' mode shows both monitors displaying identical content.

Odstraňování problémů

If you encounter issues, please refer to the following common troubleshooting steps:

• Žádné zobrazení nebo nesprávné rozlišení:
  • Ensure all HDMI cables are securely connected to both the KVM and your computers/monitors.
  • Verify that your source devices (computers), monitors, and HDMI cables all support the desired resolution (e.g., 8K@60Hz or 4K@120Hz).
  • Confirm that both HDMI1 and HDMI2 inputs for the active PC are connected to that PC for dual monitor output.
  • Check your computer's display settings to ensure dual monitors are detected and configured correctly (Extend or Duplicate mode).
  • Zkuste restartovat KVM přepínač a poté počítače a monitory.
• Nefunkční zařízení USB:
  • Ensure the USB-C cables from your computers are properly connected to the KVM's PC IN USB-C ports.
  • For external hard drives or flash drives, check your computer's power management settings for USB ports. Some operating systems may put USB ports to sleep, causing devices to disconnect during switching. Disabling these power-saving features for USB root hubs can resolve this.
  • Zkuste připojit zařízení USB přímo k počítači a ověřit si, zda funguje samostatně.
• Wired Desktop Controller Not Responding:
  • Ensure the controller cable is securely plugged into the KVM's 'Control' port.
  • Test switching using the 'Select' button on the KVM's front panel to confirm the KVM itself is functioning.

Specifikace

Obrázek: Podrobný view of the KVM switch's front panel, illustrating the two USB 2.0 ports for mouse and keyboard, and two USB 3.0 ports for high-speed devices like hard disks and flash drives, along with their respective data transfer speeds.

Image: A setup featuring two monitors displaying ultra-high-definition content, demonstrating the KVM switch's support for 8K@60Hz and 4K@120Hz resolutions, with backward compatibility for 1080P.

Záruka a podpora

VEDINDUST is committed to providing high-quality products and customer satisfaction. If you encounter any problems during the use of your KVM HDMI Switch, please do not hesitate to contact our professional after-sales support team. We are dedicated to providing timely and effective solutions to ensure your product functions correctly.

For support, please refer to the contact information provided with your purchase or visit the official VEDINDUST webmísto.

Produktové videoview