Uživatelská příručka k dieselovému ohřívači vzduchu Sunster 8KW

1. Úvod

This manual provides detailed instructions for the safe and efficient operation of your Sunster 8KW Diesel Air Heater. Please read all instructions carefully before use to ensure proper functionality and safety.

Klíčové vlastnosti:

• Smart Panel Control: Offers constant temperature control (automatic start/stop), timing function, ventilation mode, and turbo heat mode.
• Ovládání Bluetooth aplikací: Upravujte nastavení, vytvářejte topné plány a sledujte výkon pomocí aplikace „Sunster“.
• Duální napájení: Compatible with 12/24V DC and 110-240V AC power sources, automatically switching between vehicle and household power.
• Funkce ventilace: Circulates air when not heating, useful for dissipating heat in warmer conditions.
• Automatický start/stop: Automatically shuts off when the set temperature is reached and reactivates when the temperature drops, enhancing energy efficiency.
• Vysoká účinnost: Heating efficiency ≥ 90%, with precise oil control (0.26-0.48L/h). One gallon of fuel can heat approximately 20 square meters overnight.
• Provoz s nízkou hlučností: Upgraded silent fuel pump operates at ≤ 35 dB.
• Bezpečnostní ochrany: Zahrnuje přehřátí, zkrat, zpětné zapojení a přepětítage ochrana.

2. Komponenty produktu

The following components are typically included with your Sunster 8KW Diesel Air Heater:

Obrázek 2.1: Main unit and accessories. This image displays the main heater unit, LCD switch, remote control, connection holders, manual, silencer, battery power cord, exhaust pipe, fixture accessories set, AC-DC adapter power, and flexible air outlet pipe.

• Main Diesel Air Heater Unit
• Přepínač LCD displeje
• Dálkové ovládání
• Connection Holders (Base Clips)
• Uživatelská příručka
• Tlumič
• Battery Power Cord (12/24V DC)
• Výfukové potrubí
• Fixture Accessories Set (screws, clamps)
• AC-DC Adapter Power (110-240V AC)
• Flexible and Stretchable Air Outlet Pipe
• Intake Pipe with Integrated Air Filter

3. Instalační příručka

Follow these steps for proper installation of your diesel air heater. Ensure all connections are secure before operation.

3.1 Vybalení a počáteční nastavení

1. Obsah rozbalení: Carefully open the box and remove all components. Verify that all items listed in Section 2 are present.
2. Install Base Clips: Attach the provided base clips to the bottom of the heater unit. These clips help secure the unit.
3. Elevate Unit (Optional): If needed, place the heater on wood blocks or other stable objects to elevate it for easier access during pipe installation.

3.2 Instalace výfukového a sacího potrubí

1. Install Exhaust Pipe: Connect the exhaust pipe to the designated port on the heater. Ensure it is securely fastened with clamps. The exhaust pipe must lead to the outside to safely vent exhaust gases. Maintain a safe distance between the exhaust pipe and the oil pipe, as the exhaust pipe becomes very hot during operation.
2. Install Intake Pipe and Air Filter: Attach the intake pipe and integrated air filter to the corresponding port. Secure with clamps.
3. Instalace tlumiče: Secure the silencer to the end of the exhaust pipe using clamps and the provided bracket.

Obrázek 3.1: Detailní view of exhaust pipe and air filter installation. The exhaust pipe is connected to the heater and routed outwards, while the intake pipe with its filter is attached to the other side.

3.3 Outlet Duct Installation

1. Install Outlet Duct: Connect the flexible air outlet duct to the heater's hot air outlet. Secure it with a clamp.

3.4 Připojení napájení

1. Připojte napájení: Link the power supply wires: red to positive (+) and black to negative (-). For AC power, use the provided AC-DC adapter. For DC power, connect directly to a 12V or 24V battery.

3.5 Tankování

1. Add Diesel Fuel: Fill the fuel tank with appropriate diesel fuel. Ensure the fuel cap is securely tightened after filling.

3.6 Instalační video

4. Návod k obsluze

4.1 Ovládací panel Overview

Obrázek 4.2: LCD Control Panel. This image highlights the various functions of the LCD control panel, including operation method, time setting, pump oil volume setting, remote control code, temperature control conversion, fault display, timing function, automatic start & stop, turbo heat mode, display altitude, and ventilation function.

4.2 Zapnutí/vypnutí

• Zapnout: In shutdown state, press the "ON/OFF" button on the control panel or remote control.
• Vypnout: In power-on state, press the "ON/OFF" button on the control panel or remote control.
• Důležitá poznámka: The machine will automatically dissipate heat for approximately 30 minutes after being turned off. Do not force power off midway, as this can prevent proper heat discharge.

4.3 Mode and Temperature Adjustment

• Přepínací režimy: In power-on state, press the [knob] on the control panel to cycle through different modes (e.g., temperature control mode, constant temperature mode, gear mode).
• Numerical Adjustment: Rotate the [knob] clockwise to increase the gear/temperature (+1 unit per click, up to 10 gears or 36°C). Rotate counter-clockwise to decrease the gear/temperature (-1 unit per click, minimum to 1 gear or 8°C).

4.4 Základní nastavení (základní model)

To access basic settings, long press the "ON/OFF" button for 3 seconds when the unit is powered on. The upper left corner of the screen will display setting items (F0, F1, etc.). Rotate the [knob] to navigate and adjust values. Press the [knob] again to confirm changes.

• F0: Current Time - Adjust the current time.
• F1: Start-up Time - Set a scheduled start time.
• F2: Running Time (After Starting) - Set the duration of operation (30 minutes is 1 unit, adjustment range: 0-10 hours).
• F3: Self-starting Switch Settings - 'ON' is open, 'OF' is closed.
• F4: Language Switch - Select language (Chinese, English, Russian) or turn voice off.
• F5: Temperature Compensation - Adjust temperature compensation (range: -9 to 9°C).
• F6: Fuel Tank Volume - Set the fuel tank volume (5L is 1 unit, adjustment range: 5-50L).
• F7: Oil Pump Type - Select oil pump type.
• F8: Constant Temperature Heating - 'ON' is open, 'OF' is closed.
• F9: Temperature Switching Unit - Switch between °F and °C.
• FA: Screen Brightness - Adjust screen brightness (range: 5-100).
• Fb: Full Tank - Long press the [knob] and release after hearing the prompt tone to set full tank.
• FC: CO Numerical Detection - In power-on state, press the [knob] twice in a row to check the CO value.

4.5 Inženýrský režim

To enter engineering mode, press the [knob] for 5 seconds when the unit is powered on. The upper right corner will show the current project (En00, En01, etc.). Rotate the [knob] to adjust the item and view data.

• E0: Heater Main Board Version Number
• E1: Fault Code
• E2: Shell Temperature
• E3: Supply Voltage
• E4: Heater Running Gear
• E5: Cab Temperature
• E6: Nadmořská výška
• E8: Remote Control Matching
• E9: Bluetooth Matching

4.6 Přizpůsobení dálkového ovládání

• Vhodný: In shutdown state, press the [knob] three times in a row. The screen will display "P-1". Press any button on the remote control. If successful, the interface will automatically exit, and the remote control can now operate the heater.
• Mazání dat: To clear matching data, press and hold the [ON/OFF] button when powered on. Wait for the interface to show "CLr" which then becomes "SUC" (Success).

4.7 Manual Pump Oil

• Long press the [knob] for 5 seconds when powered on and turned off for the first time. The screen will flash and show a 300-second countdown. Wait for the countdown to end or press [ON/OFF] to end pumping oil.

4.8 Připojení Bluetooth

• Stáhnout aplikaci: Open your device's app store (e.g., Apple App Store, Google Play Store) and search for "Sunster". Download and install the application.
• View Bluetooth kód: In power-on state, press the [knob] for 5 seconds to enter engineering mode. Adjust to 'En09' to view kód Bluetooth.
• Připojit: Open the Sunster mobile app and ensure Bluetooth is enabled on your device. Hledat Bluetooth devices and connect to your heater. Once connected, the heater can be operated through the mobile app.

5. Údržba

Pravidelná údržba zajistí dlouhou životnost a efektivní provoz vašeho dieselového ohřívače vzduchu.

• Kvalita paliva: Always use clean, high-quality diesel fuel to prevent blockages and ensure efficient combustion.
• Vzduchový filtr: Periodically inspect and clean or replace the integrated air filter to maintain optimal air quality and heater performance.
• Výfukový systém: Regularly check the exhaust pipe and silencer for any blockages, damage, or leaks. Ensure the exhaust path remains clear and free of flammable materials.
• Generální úklid: Udržujte vnější povrch ohřívače čistý a bez prachu a nečistot.

6. Řešení problémů

If you encounter issues with your heater, refer to the following general troubleshooting tips. For specific fault codes, consult the 'Engineering Mode' section (E1: Fault Code) and refer to the full product manual or contact customer support.

• Topení se nespustí:
  • Check power connections (12/24V DC or 110-240V AC).
  • Ensure sufficient diesel fuel in the tank.
  • Verify the 'ON/OFF' button or remote control signal.
• Nedostatečné teplo:
  • Check the selected gear/temperature setting.
  • Inspect the air intake and outlet for obstructions.
  • Ujistěte se, že je vzduchový filtr čistý.
• Neobvyklý hluk:
  • Check for loose components or obstructions in the fan area.
  • Verify proper installation of the silencer and exhaust pipe.
• Kódy chyb: If an error code appears on the LCD display, enter 'Engineering Mode' (Section 4.5) to identify the specific fault code (E1). Refer to the comprehensive manual or contact Sunster customer support for detailed solutions.

7. Specifikace

8. Záruka a podpora

For warranty information, technical support, or service inquiries, please contact Sunster customer service directly. Keep your purchase receipt and product model number handy for faster assistance.

You can visit the official Sunster store for more information: Sunster Store