1. Úvod
The LILYGO T-Display S3 Pro LR1121 is an advanced development board built upon the T-Display S3 Pro External Expansion Module. It integrates the LR1121 chip, offering dual LoRa band capabilities (Sub-G band and 2.4G band). This board features a 2.33-inch touch IPS TFT SPI LCD for interactive applications.
Key integrated functions include motor vibration, Real-Time Clock (RTC), speaker, and microphone. It is powered by a built-in high-capacity 2000mAh Li-ion battery. The robust ABS+PC material shell is designed with two external LoRa antenna ports, ensuring optimal wireless performance without internal interference. A 1/4-inch screw mount at the bottom allows for attachment to outdoor fixtures like tripods.
Figure 1.1: LILYGO T-Display S3 Pro LR1121 front view s vysunutými anténami.
Obrázek 1.2: Detailní zobrazeníview of LILYGO T-Display S3 Pro LR1121 features.
2. Nastavení
2.1 Počáteční nastavení hardwaru
- Instalace antény: Carefully connect the two LoRa external antennas to the designated ports on the side of the device. Ensure they are securely fastened. The LR1121 antenna can be rotated 180 degrees in the direction of the screen; avoid rotating it backward.
- Připojení napájení: Connect the LILYGO T-Display S3 Pro LR1121 to a power source using a standard USB-C cable. The device has a built-in 2000mAh Li-ion battery.
Obrázek 2.1: Zpět view with pinout diagram.
Figure 2.2: Detailed Pinmap Diagram.
2.2 Nastavení softwarového prostředí
For programming and development, refer to the official GitHub repository for detailed instructions on setting up your development environment, including Arduino-IDE or VS Code.
- Repozitář GitHubu: github.com/Xinyuan-LilyGO/T-Display-S3-Pro-MVSRLora
3. Návod k obsluze
3.1 Základní obsluha
- Zapnutí/vypnutí: Use the designated power button (if available) or connect/disconnect USB power to turn the device on or off.
- Interakce se zobrazením: The 2.33-inch touch IPS TFT SPI LCD supports touch input. Interact with on-screen elements as programmed.
Figure 3.1: Display showing touch information.
3.2 Bezdrátová komunikace
The board supports multiple wireless communication protocols:
- LoRa: Utilizes the LR1121 chip for Sub-G band and 2.4G band LoRa communication. Ensure antennas are properly connected for optimal range.
- Wi-Fi: Supports Wi-Fi 802.11 for network connectivity.
- Bluetooth: Features BLE 5 and Bluetooth mesh for short-range communication.
3.3 Integrated Functions
The T-Display S3 Pro LR1121 includes several integrated peripherals:
- Motor Vibration: Poskytuje haptickou zpětnou vazbu.
- RTC (hodiny v reálném čase): Maintains accurate timekeeping.
- Reproduktor: Pro audio výstup.
- Mikrofon: Pro audio vstup.
Video 3.1: Official video demonstrating the LILYGO T-Display S3 Pro LR1121 development board's features and functionality.
4. Údržba
4.1 Obecná péče
- Čištění: K čištění zařízení používejte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani rozpouštědla.
- Skladování: Přístroj skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
- Fyzická ochrana: The ABS+PC shell provides good protection, but avoid dropping the device or subjecting it to strong impacts.
4.2 Péče o baterii
- Nabíjení: Charge the built-in 2000mAh Li-ion battery using a compatible USB-C power adapter (5V, 500mA recommended).
- Dlouhodobé skladování: If storing the device for an extended period, charge the battery to approximately 50% to prolong its lifespan. Avoid fully discharging or fully charging the battery for long-term storage.
5. Řešení problémů
If you encounter issues with your LILYGO T-Display S3 Pro LR1121, consider the following steps:
- Zařízení se nezapíná: Ensure the battery is charged or the device is connected to a stable USB power source. Check the USB-C cable and port for damage.
- Problémy se zobrazením: If the display is blank or unresponsive, try restarting the device. Verify that the software is correctly loaded and initialized the display.
- Connectivity Problems (LoRa, Wi-Fi, Bluetooth): Check antenna connections for LoRa. For Wi-Fi and Bluetooth, ensure your software configuration is correct and that the device is within range of the network/peer.
- Problémy související se softwarem: Refer to the official GitHub repository for common issues, firmware updates, and community support. Many problems can be resolved by ensuring you are running the latest stable firmware or by consulting the project's documentation.
- Nereagující zařízení: If the device becomes unresponsive, perform a hard reset by disconnecting and reconnecting the power source.
6. Specifikace
| Funkce | Detail |
|---|---|
| Značka | LILYGO |
| Název modelu | LILYGO T-Display S3 Pro LR1121 |
| Technologie připojení | Bluetooth, Wi-Fi, LoRa (Sub-G, 2.4G) |
| Zahrnuté komponenty | Uživatelská příručka |
| Operační systém | FreeRTOS |
| Značka procesoru | Espressif (ESP32-S3R8 Dual-core LX7 microprocessor) |
| Technologie paměti RAM | LPDDR4 |
| Počet procesorů | 1 |
| Celkový počet portů USB | 1 (USB-C) |
| Zobrazit | 2.33 inch Touch IPS TFT SPI LCD (Resolution: 222(H) RGB x 480(V), Drive Chip: ST7796) |
| LoRa vysílač/přijímač | LR1121 (LoRa/(G)FSK half-duplex, 150-960MHz, 2.4GHz, 2GHz S-band, 1.55GHz L-band) |
| Voice Communication Kit | Microphone (MP34DT05-A), Speaker (MAX98357A) |
| Other Integrated Features | Vibration Motor (PWM Motor), RTC (BM8563) |
| Baterie | Vestavěná 2000mAh Li-ion baterie |
| Rozměry (D x Š x V) | 111 x 36 x 52 mm |
| UPC | 717382831206 |
7. Záruka a podpora
7.1 Informace o záruce
This product is covered by the manufacturer's standard warranty. Please refer to the LILYGO official webnebo se obraťte na jejich zákaznický servis, kde vám sdělí konkrétní záruční podmínky.
7.2 Technická podpora
For technical assistance, documentation, and community support, please visit the official LILYGO GitHub repository:
If you have any questions or suggestions regarding the product, you may also contact LILYGO directly through their official channels.