TOMZN TOVPD3-63VA Din Rail 3 Phase VoltagUživatelská příručka ochranného relé e

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of the TOMZN TOVPD3-63VA Din Rail 3 Phase Adjustable Over and Under Voltage Protector Relay with Current Protection. This device is designed to safeguard electrical equipment from voltage fluctuations and overcurrent conditions in three-phase systems.

Před instalací a provozem si prosím pečlivě přečtěte tento návod, abyste zajistili správné používání a předešli poškození zařízení nebo připojeného vybavení.

Obrázek 1: Přední strana view of the TOMZN TOVPD3-63VA Din Rail 3 Phase Voltage Protector Relay.

2. Bezpečnostní informace

VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Instalaci a údržbu by měl provádět pouze kvalifikovaný personál.

• Před instalací nebo servisem zařízení vždy odpojte napájení.
• Ujistěte se, že všechna elektroinstalace jsou bezpečná a splňují místní elektrotechnické předpisy.
• Neprovozujte zařízení ve vlhku nebo damp podmínky.
• Ověřte svtage and current ratings of your system match the device specifications.
• Never attempt to open or repair the device yourself. Refer to qualified service personnel.

3. Klíčové vlastnosti

The TOMZN TOVPD3-63VA offers robust protection and monitoring capabilities:

• Instant Fault Response: Detects and reacts to electrical abnormalities within milliseconds to prevent equipment damage.
• Vícenásobný ochranný systém: Comprehensive coverage against overcurrent, under-voltage, phase loss, and short circuits.
• Trvanlivost průmyslové třídy: Heavy-duty construction with flame-retardant materials for demanding environments.
• Univerzální kompatibilita: Works with AC/DC systems, motors, transformers, and power distribution panels.
• Clear Visual Indicators: LED status lights and fault alarms for quick system diagnostics.
• Nastavitelný přetlaktage, pod-voltage a prahové hodnoty ochrany proti nadproudu.
• Asymmetry and phase sequence protection.
• Adjustable active time and reconnect time.
• Manuální voltage and current calibration capability.

4. Varianty produktu

The TOVPD3 series is available in several configurations to suit different electrical systems. The primary differences lie in the current rating and the presence of a neutral (N) connection, which affects the voltage display and wiring:

• 63A With N (3X120V/3X220V/3X230V): Designed for 3-phase systems with a neutral line. Each phase voltage (L1, L2, L3) is displayed relative to the neutral. For example, in a 3*220V+N system, each phase will display 220V.
• 63A without N (380V): Designed for 3-phase systems without a neutral line. The device displays the line-to-line voltage for each phase (e.g., L1-L2, L2-L3, L3-L1), typically showing 380V across all phases.
• 100A With N (3X220V): Similar to the 63A With N variant but with a higher current capacity.
• 100A without N (380V): Similar to the 63A without N variant but with a higher current capacity.

Ensure you select the correct variant for your specific electrical installation.

5. Součásti a displej

The device features a clear digital display and intuitive control buttons for monitoring and configuration.

Figure 2: Labeled components and display of the TOMZN TOVPD3-63VA.

5.1 Obrazovky displeje

• svtage Display Screen (V): Ukazuje svtage for each phase (L1, L2, L3).
• Current Display Screen (A): Shows the current for each phase (L1, L2, L3).

5.2 Ovládací tlačítka a indikátory

• Manual Switch (Power Button): Used to manually turn the output on or off.
• SET (Menu Key): Enters the setting menu and confirms selections.
• Adjustment Keys (Up/Down Arrows): Used to navigate menu options and adjust parameter values.
• Indikace výstupu: LED indicator for output status.
• Voltage Indication (>U): LED indicator illuminates when an over-voltagJe detekován stav.
• Pod voltage Indication (<U): LED indicator illuminates when an under-voltagJe detekován stav.
• Over-current Indication (>I): LED indicator illuminates when an over-current condition is detected.
• Asymmetry Indication (Asy): LED indicator illuminates when phase asymmetry is detected.

6. Instalace

6.1 Montáž

The TOMZN TOVPD3-63VA is designed for Din Rail mounting. Ensure the Din Rail is securely installed in an appropriate electrical enclosure, away from moisture and excessive heat.

6.2 Zapojení

IMPORTANT: Disconnect all power before proceeding with wiring.

1. Identify the input (IN) and output (OUT) terminals on the device. The terminals are typically labeled L1, L2, L3, and N (if applicable).
2. Connect the incoming three-phase power supply to the 'IN' terminals (L1, L2, L3). If your model includes a neutral connection, connect the neutral line to the 'N' terminal.
3. Connect the load (equipment to be protected) to the 'OUT' terminals (L1, L2, L3). If your model includes a neutral connection, connect the load's neutral line to the 'N' output terminal.
4. Ensure all connections are tight and secure to prevent loose contacts, which can cause overheating or malfunction.
5. Double-check all wiring against your system's electrical diagram and local codes before restoring power.

Obrázek 3: Shora dolů view illustrating the input and output terminals for wiring.

7. Provoz

7.1 Počáteční zapnutí

1. Po dokončení zapojení obnovte napájení obvodu.
2. The device display will illuminate, showing the current voltage and current readings for each phase.
3. The device will perform a self-check and, if no faults are detected, will connect the output after the configured reconnect time.

7.2 Nastavení parametrů

Úprava parametrů ochrany:

1. Stiskněte a podržte SOUBOR button for a few seconds to enter the setting menu.
2. Použijte Up a Dolů adjustment keys to navigate through the parameters (e.g., Over-voltage threshold, Under-voltage threshold, Over-current threshold, Active time, Reconnect time, Asymmetry threshold, Phase sequence protection enable/disable).
3. Stiskněte SOUBOR znovu vyberte parametr k úpravě.
4. Použijte Up a Dolů klávesy pro změnu hodnoty.
5. Stiskněte SOUBOR to confirm the new value and move to the next parameter or exit the menu.
6. If no buttons are pressed for a certain period, the device will automatically exit the setting menu and save changes.

7.3 Ruční kalibrace

The device supports manual calibration of voltage and current readings for enhanced accuracy. Refer to the device's on-screen menu for specific calibration steps, typically involving comparing readings with a known accurate meter and adjusting the device's internal values.

8. Údržba

The TOMZN TOVPD3-63VA is designed for minimal maintenance. However, periodic checks are recommended:

• Vizuální kontrola: Regularly inspect the device for any signs of physical damage, discoloration, or loose connections.
• Čištění: Keep the device clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use solvents or abrasive cleaners.
• Kontrola funkčnosti: Periodically verify the device's protection functions by simulating fault conditions (if safely possible and recommended by a qualified electrician) or by observing its normal operation.

9. Řešení problémů

If you encounter issues with your TOMZN TOVPD3-63VA, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact a qualified electrician or the product manufacturer for assistance.

10. Specifikace

11. Záruka a podpora

This product is manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. In case of technical issues or questions not covered in this manual, please reach out to the product manufacturer or your supplier for support.