1. Introduction and Important Safety Warnings
Thank you for choosing the VEVOR US-007/36W UV Disinfection Lamp. This device utilizes advanced UV-C light and ozone generation to effectively purify air and surfaces in unoccupied spaces. Please read this manual thoroughly before use to ensure safe and optimal operation.
CRITICAL SAFETY WARNINGS:
- DANGER: UV-C RADIATION AND OZONE EMISSION. Direct exposure to UV-C light can cause severe skin and eye damage. Ozone can be harmful if inhaled in high concentrations.
- NIKDY operate this lamp in the presence of humans, pets, or plants. Ensure the area is completely clear during operation.
- Po každém použití, THOROUGHLY VENTILATE the treated room for at least 30-60 minutes to dissipate any residual ozone before re-entry.
- Keep the device out of reach of children and individuals who cannot understand these warnings.
- Do not disassemble, modify, or attempt to repair the device yourself. Contact qualified personnel for service.
2. Co je v krabici
Carefully unpack all components and check for any damage. If any items are missing or damaged, please contact VEVOR customer support.
- 1 x VEVOR US-007/36W UV Disinfection Lamp
- 1 x Dálkový ovladač
- 1 x Alkaline Battery (23A 12V) for Remote Controller
- 1 x Sticker for Lampshade Top
- 1 x Návod k obsluze (tento dokument)
3. Konec produktuview
The VEVOR US-007/36W UV Disinfection Lamp is designed for comprehensive air and surface purification. It features a robust design with intuitive controls.
Image 3.1: Product Details. This image shows the main components of the VEVOR UV Disinfection Lamp, including the ABS flame-retardant lamp cover, the 110W long-lifespan light tube, the hand-operated switch on the base, and the wireless remote controller.
Klíčové komponenty:
- UV-C Quartz Tube: High-transmission quartz tube emitting 253.7 nm UV-C light and 185 nm UV light for ozone generation.
- ABS Flame Retardant Lamp Pokrýt: Provides protection for the UV-C tube.
- Base with Control Panel: Features a hand-operated switch and digital display for timer settings.
- Bezdrátový dálkový ovladač: Allows convenient operation from a distance, offering ON/OFF and timer functions.
Image 3.2: Control Modes. This image illustrates the two control methods: the wireless remote control and the panel control located on the device base. It also highlights the three timer levels: 0.5 hours, 1 hour, and 2 hours.
4. Nastavení
- Rozbalte zařízení: Carefully remove the UV Disinfection Lamp and all accessories from its packaging. Retain packaging for future storage or transport.
- Umístění: Umístěte lamp on a stable, flat surface in the center of the room you wish to disinfect. Ensure there are no obstructions blocking the UV light path. The lamp is suitable for rooms up to 37 m² (approximately 400 sq ft).
- Připojení napájení: Plug the power cord into a standard electrical outlet (220-240V, 50Hz).
- Instalace baterie dálkového ovladače: Open the battery compartment on the back of the remote control. Insert the provided 23A 12V alkaline battery, ensuring correct polarity (+/-). Close the compartment.
- Připravte si místnost: Before operation, ensure all people, pets, and plants are removed from the room. Close all doors and windows to contain the UV-C light and ozone.
5. Návod k obsluze
Jáamp can be operated using either the control panel on the device base or the wireless remote control.
Pomocí ovládacího panelu:
- Ujistěte se, že lamp is plugged in and the room is empty.
- Press the power button on the base. The lamp will typically have a delay before turning on to allow you to leave the room safely.
- Use the timer buttons on the base to select the desired disinfection duration (0.5h, 1h, or 2h).
- Jakmile je časovač nastaven, lamp will begin operation after a short delay. Immediately exit the room.
Použití dálkového ovládání:
- Ujistěte se, že lamp is plugged in and the room is empty.
- Point the remote control towards the lamp.
- Press the 'ON' button to power on the lamp.
- Select the desired timer setting (0.5H, 1H, or 2H) using the corresponding buttons on the remote.
- Jáamp will activate after a short delay. Immediately exit the room.
Po operaci:
- Once the selected disinfection cycle is complete, the lamp se automaticky vypne.
- NE re-enter the room immediately. Open windows and doors (from outside the room if possible) to allow for thorough ventilation.
- Ventilate the room for at least 30-60 minutes to ensure all ozone has dissipated before re-entry.
Image 5.1: Ozone and UV-C Action. This image visually represents the lamp's dual action, showing UV-C light and ozone (O3) being emitted to purify the air and surfaces within a room, covering up to 37 m².
6. Údržba
Regular maintenance ensures the longevity and effectiveness of your UV Disinfection Lamp.
Čištění Lamp:
- Před čištěním zařízení vždy odpojte ze zásuvky.
- Use a soft, dry cloth to gently wipe the exterior of the lamp and the quartz tube.
- Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the device or reduce the effectiveness of the UV-C tube.
- Ujistěte se, že lamp je před opětovným zapojením zcela suchá.
Výměna baterie v dálkovém ovládání:
- If the remote control becomes unresponsive, replace the 23A 12V alkaline battery.
- Open the battery compartment, remove the old battery, and insert a new one with correct polarity.
- Staré baterie zlikvidujte v souladu s místními předpisy.
7. Řešení problémů
If you encounter issues with your VEVOR UV Disinfection Lamp, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Lamp nezapne. | Žádné napájení. Baterie dálkového ovládání je vybitá. Zařízení je vadné. | Zkontrolujte, zda je napájecí kabel bezpečně zapojený do funkční zásuvky. Vyměňte baterii dálkového ovládání. Pokud problém přetrvává, kontaktujte zákaznickou podporu VEVOR. |
| Dálkové ovládání nefunguje. | Baterie je vybitá nebo nesprávně vložená. Překážka mezi dálkovým ovládáním a lamp. Remote is too far from the lamp. | Replace the remote control battery and ensure correct polarity. Ensure a clear line of sight between the remote and the lamp. Dálkový ovladač používejte v jeho efektivním dosahu. |
| Strong odor after disinfection. | Residual ozone in the air. | This is normal. Ensure thorough ventilation of the room for at least 30-60 minutes after use. |
8. Specifikace
Detailed technical specifications for the VEVOR US-007/36W UV Disinfection Lamp.
Image 8.1: Dimensions and Specifications. Tento obrázek poskytuje vizuální znázornění lamp's dimensions and lists key specifications such as model number, power, timer settings, material, wavelength, color, controller size, product size, product weight, and package contents.
| Funkce | Specifikace |
|---|---|
| Číslo modelu | US-007/36W |
| Moc | 36 W |
| Nastavení časovače | 3 Levels (0.5 h / 1 h / 2 h) |
| Materiál | ABS |
| Vlnová délka | 253.7 nm + 185 nm (UV-C light + Ozone) |
| Barva | Černý |
| Velikost ovladače | 4.1 x 1.7 x 0.7 palce / 105 x 45 x 18 mm |
| Rozměry produktu (průměr x výška) | Φ6.5 x 16.4 in / Φ166 x 416 mm |
| Hmotnost produktu | 1.3 lb / 0.6 kg ± 3% |
| Jmenovitý objemtage Frekvence | 220-240V, 50Hz |
| Životnost světelného zdroje | 8000 hodiny |
| Kontrolní metoda | Remote Control, Panel Control |
| Oblast pokrytí | Až 37 m² (cca 400 čtverečních stop) |
9. Záruka a podpora
VEVOR products are designed for durability and performance. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official VEVOR webpodrobné záruční podmínky naleznete na webu.
Zákaznická podpora:
If you have any questions, require technical assistance, or need to report an issue, please contact VEVOR customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (US-007/36W) and purchase details ready.
For more information and to register your product, visit: www.vevor.com