AOLIKES VB607 M, BM921 M, BM918

AOLIKES 1200mAh Battery Replacement User Manual

For BOIFUN VB607 M / BM921 M / BM918 Baby Monitors

Zavedení

This manual provides essential information for the safe and effective use of your AOLIKES 1200mAh Li-Po Battery Replacement. This battery is specifically designed for compatibility with BOIFUN VB607 M, BM921 M, and BM918 baby monitors, ensuring reliable power for your device.

Bezpečnostní informace

Please read and understand all safety instructions before installing or using the battery. Failure to follow these instructions may result in fire, electric shock, injury, or damage to the product or property.

  • Baterii nerozebírejte, nedrťte, nepropichujte ani nezkratujte.
  • Nevystavujte baterii vysokým teplotám (nad 60 °C / 140 °F) ani přímému slunečnímu záření.
  • Nevystavujte baterii vodě nebo jiným kapalinám.
  • Udržujte baterii mimo dosah dětí a domácích zvířat.
  • Použité baterie zlikvidujte v souladu s místními předpisy. Nevhazujte je do domovního odpadu.
  • The battery features built-in protection against overcharging, overheating, and short circuits to ensure safe operation.

Kompatibilita

This 1200mAh Li-Po battery is designed as a direct replacement for the following baby monitor models:

  • BOIFUN VB607 M Video Baby Monitor (3.2" Screen)
  • BOIFUN BM921 Video Baby Monitor
  • BOIFUN BM918 Video Baby Monitor

It is also compatible with battery models Y21kbfaa1, Y20FCEAA1, Y20JAHAA1, and LP62N47-1-43.

Setup (Battery Replacement)

Follow these steps to replace the battery in your compatible baby monitor:

  1. Vypínací zařízení: Ensure your baby monitor is completely powered off and unplugged from any power source.
  2. Najděte přihrádku na baterie: Identify the battery compartment on your baby monitor. This is typically on the back or bottom of the parent unit.
  3. Otevřený prostor: Carefully open the battery compartment cover. This may involve sliding a latch or unscrewing a small screw.
  4. Vyjměte starou baterii: Gently disconnect the old battery's connector from the monitor's port. Remove the old battery from the compartment.
  5. Vložení nové baterie: Connect the new AOLIKES 1200mAh battery's connector to the monitor's port, ensuring the correct orientation. Place the battery securely into the compartment.
  6. Zavřít přihrádku: Nasaďte zpět kryt prostoru pro baterie a zajistěte jej.
  7. Počáteční poplatek: It is recommended to fully charge the new battery before its first use. Connect your baby monitor to its power adapter and allow it to charge until the battery indicator shows full.
AOLIKES 1200mAh Li-Po Battery Replacement

Image 1: The AOLIKES 1200mAh Li-Po battery replacement. This image shows the battery pack with its label displaying specifications like SN: LP62N47-1-43, Nominal Voltage: 3.7V, Capacity: 1200mAh, Limited Charge Voltage: 4.2V, and Power: 4.44Wh. It also shows the CE, UKCA, and recycling symbols, and "Made in China". The battery has a white connector with red, black, and yellow wires.

AOLIKES 1200mAh Battery Compatible with BOIFUN Baby Monitors

Image 2: The AOLIKES 1200mAh battery with text indicating compatibility. The text above the battery reads "1200mAh Battery Compatible with BOIFUN Baby Monitor VB607-M / BM921 / VM918". The battery itself is identical to Image 1, showing its label and connector.

Operating (Battery Usage)

Once installed and fully charged, the battery will power your baby monitor. The monitor's battery indicator will show the current charge level. Recharge the monitor when the battery level is low to ensure continuous operation.

  • For optimal performance, avoid completely draining the battery before recharging.
  • Use only the original charger provided with your baby monitor to charge the battery.

Údržba

Správná údržba může prodloužit životnost vaší baterie:

  • Skladování: If storing the battery for an extended period, store it in a cool, dry place at approximately 50% charge. Avoid extreme temperatures.
  • Čištění: Keep the battery and its contacts clean and dry. Use a soft, dry cloth to wipe away any dust or debris.
  • Vyhněte se fyzickému poškození: Protect the battery from drops, impacts, and excessive pressure.

Odstraňování problémů

Pokud máte problémy s baterií, zvažte následující:

ProblémMožná příčinaŘešení
Baterie se nenabíjí.Incorrect installation, faulty charger, or damaged battery.Ensure battery is correctly connected. Try a different charger (if available and compatible). If issues persist, the battery may be faulty.
Krátká výdrž baterie.Battery not fully charged, aging battery, or high power consumption by monitor.Ensure full charge. Battery capacity naturally degrades over time. Check monitor settings for power-saving options.
Monitor not powering on after battery replacement.Battery not connected, battery completely discharged, or monitor issue.Verify battery connection. Connect monitor to power adapter to see if it powers on directly. Allow battery to charge for a period.

Specifikace

AtributHodnota
Typ baterieLithium Polymer Battery (Li-Po)
Kapacita1200 XNUMX mAh
Jmenovitý svtage3.7V
Limited Charge Voltage4.2V
Moc4.44 Wh
Cutoff Voltage (Discharged)2.95V
Rozměry (cca)2.2 x 1.54 x 0.47 palce
Hmotnost položky1.13 unce

Záruka a podpora

For warranty information or technical support, please contact AOLIKES customer service through the retailer where the product was purchased. Please have your purchase details and product model information ready.

Poznámka: Konkrétní záruční podmínky se mohou lišit v závislosti na regionu a prodejci.

© 2025 AOLIKES. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.