Zavedení
This manual provides essential instructions for the oneisall PTM-643 wireless water pump, designed as a spare or replacement component for oneisall cat fountains, specifically models PW13 and PW14. This battery-operated pump ensures a continuous fresh water supply for your pet, offering flexibility in fountain placement.
Bezpečnostní informace
- Neoplachujte: The battery module contains electrical components. Always keep the battery module dry. Do not rinse it under water.
- Ensure the pump is correctly installed before operating the fountain.
- Use only with compatible oneisall cat fountain models (PW13, PW14).
Image: The water pump module with a clear warning to avoid rinsing it with water due to its electrical components.
Nastavení
Installing the Water Pump
- Ensure the cat fountain is clean and dry before installation.
- Carefully align the water pump module with the designated slot in the fountain base.
- Gently push the pump down until it is securely seated. The pump is designed for easy replacement.
Image: Illustration demonstrating the simple process of inserting the water pump into the fountain base.
Charging the Water Pump
The water pump can be charged in two ways:
- Přímé nabíjení: Connect the charging cable directly to the fountain while the pump is installed. The fountain can operate while charging.
- Disassembled Charging: Remove the pump module from the fountain and connect the charging cable directly to the pump for charging.
A full charge provides up to 30 days of operation, reducing the frequency of charging.
Image: Visual guide illustrating both direct charging of the fountain and charging the pump module separately.
Návod k obsluze
The oneisall cat fountain, powered by this pump, features an intelligent control panel for easy operation. Use the on/off button to switch between different water flow modes.
Water Flow Modes
- Constant Flow Mode: Provides a continuous stream of water. This mode typically requires the fountain to be plugged into a power source.
- Režim snímače pohybu: The pump activates when motion is detected nearby, conserving battery life and filter usage.
- Režim časovače: The pump operates at set intervals, providing fresh water periodically.
The indicator light on the control panel will turn red when the water level is low, signaling it is time to refill the fountain.
Image: A visual representation of the three available water flow modes: Constant, Motion Sensor, and Timer.
Údržba
Cleaning the Pump Module
The pump module is designed for easy removal to facilitate cleaning. To clean:
- Turn off and unplug the fountain (if applicable).
- Remove the pump module from the fountain base.
- Wipe the exterior of the pump module with a damp tkanina. Do not rinse the pump module directly under water.
- Clean any visible debris from the pump's intake area.
- Reinsert the clean pump module into the fountain.
Image: The water pump detached from the fountain, highlighting its easy-to-clean design.
Výměna filtru
The fountain utilizes a 5-layer filtration system to remove hair, odors, and soften water. Regular filter replacement is crucial for maintaining water quality. Refer to your fountain's main instruction manual for specific filter replacement intervals and procedures.
Obrázek: Explodoval view illustrating the five layers of the fountain's filtration system.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Pump stops working intermittently or shuts off after a short period. | Low battery charge; debris obstructing pump; incorrect operating mode. | Charge the pump fully. Clean the pump and fountain thoroughly. Ensure the desired operating mode (e.g., Constant Flow) is selected, noting that Constant Flow may require continuous power connection. |
| Fountain indicates low water level but reservoir is full. | Porucha nebo ucpání senzoru. | Clean the water level sensor area. If the issue persists, contact customer support. |
| Proud vody je slabý nebo nestálý. | Clogged filter; debris in pump; low water level. | Replace the filter. Clean the pump module. Refill the water reservoir to the MAX line. |
| Čerpadlo je hlučné. | Low water level; debris in pump; pump not seated correctly. | Ensure water level is adequate. Clean the pump. Re-seat the pump module firmly in the fountain base. |
Specifikace
| Číslo modelu | PTM-643 |
| Značka | oneisall |
| Zdroj napájení | Napájení baterií (1 baterie AAA součástí balení) |
| Materiál | Polypropylen (PP) |
| Hmotnost položky | 0.28 kg (přibližně 9.91 unce) |
| Compatible Fountain Capacity | 2.2L, 3.2L (Fountain capacity, not pump capacity) |
| Rozměry balení | 5.87 x 3.98 x 2.64 palce |
Záruka a podpora
Informace o záruce
The oneisall PTM-643 water pump is covered by a manufacturer's 2-year warranty. Please retain your proof of purchase for warranty claims.
Zákaznická podpora
For further assistance, troubleshooting, or warranty inquiries, please visit the official oneisall store or contact their customer service department. You can find contact information on the oneisall Store on Amazon.