1. Konec produktuview
The Partuto Nano Ceramic Car Window Tint Film is designed to enhance your vehicle's comfort and privacy. This high-performance film features a 50% Visible Light Transmission (VLT), 60% Infrared Rejection (IRR), and 99% Ultraviolet Rejection (UVR). Made from durable 2mil PET material, it comes in a green tint and measures 5ft x 24inch, providing effective heat insulation and sun protection.
Image 1: A roll of the Partuto Nano Ceramic Car Window Tint Film, showcasing its green hue and reflective surface.
Video 1: Stručný přehled produktuview demonstrating the Nano Ceramic Window Tint Film's features, including its heat insulation and UV blocking capabilities.
2. Klíčové vlastnosti a výhody
- Vynikající UV ochrana: Blocks 99% of harmful UV rays, preventing interior fading and protecting occupants from sun exposure.
- Effective Heat Insulation: Reduces heat buildup inside the vehicle, contributing to a cooler interior and potentially lower air conditioning usage.
- Zvýšené soukromí: The 50% VLT provides a degree of privacy while maintaining visibility from inside.
- Anti-Glare Properties: Helps reduce glare from sunlight and headlights, improving driving visibility and safety.
- Odolná konstrukce: Made from PET material with a scratch-resistant coating for long-lasting performance.
Image 2: Illustration of various Visible Light Transmission (VLT) levels on car windows, demonstrating the visual effect of different tint percentages.
Image 3: A visual representation highlighting the film's key performance metrics: 50% VLT, 60% IRR, and 99% UVR.
Image 4: Close-up of the film emphasizing its benefits: UV Shielding, Heat Resistance, and Enhanced Privacy.
Image 5: A demonstration of the film's material, highlighting its ability to provide ultraviolet and infrared protection.
Video 2: A detailed demonstration of Nano Ceramic Window Tint specifications, including measurements of VLT, UVR, IRR, and BTU heat transmission for various tint levels.
3. Specifikace
| Atribut | Hodnota |
|---|---|
| Barva | Zelený |
| Materiál | PET |
| Size (L*W) | 150 x 60cm / 5ft x 24inch |
| Visible Light Transmission (VLT) | 50 % |
| Infrared Rejection (IRR) | 60 % |
| Ultraviolet Rejection (UVR) | 99 % |
| Tloušťka | 2 mil |
| Hmotnost položky | 6.4 unce |
| Rozměry balení | 25.2 x 2.36 x 1.57 palce |
| Číslo modelu položky | tu000424a250428 |
| Pozice | Mimo |
Image 6: Visual representation of the film's dimensions: 150cm (5ft) in length and 60cm (24inch) in width.
4. Instalační příručka
Follow these steps for proper installation of your window tint film:
- Měření a řezání: Measure the size of the glass surface where the film will be applied. Cut the film to the approximate size, leaving a small margin for trimming.
- Vyčistěte sklo: Thoroughly wash the glass surface to remove any dirt, dust, or debris. Spray water generously on the glass to wet it completely.
- Připravte film: Carefully tear off the protective liner from the film. Spray water onto the adhesive side (the rubber surface) of the film to wet it.
- Aplikace fólie: Carefully place the film onto the wet glass surface. Adjust its position as needed. Spray additional water on the film's surface to lubricate it for smoothing.
- Remove Water and Bubbles: Using a squeegee, gently push water and air bubbles from the center of the film outwards towards the edges. Ensure all bubbles are removed for a smooth finish.
- Trim Excess Film: Once the film is smooth and positioned correctly, use a sharp utility knife to carefully trim any excess film along the edges of the glass.
Image 7: A person applying the window tint film to a car window, demonstrating the smoothing process.
Obrázek 8: Příkladamples of where the window tint film can be installed, including side windows, front and rear windshields, and sunroofs.
5. Péče a údržba
To ensure the longevity and performance of your window tint film, follow these care guidelines:
- Doba vytvrzování: Allow at least 3-5 days for the film to fully cure after installation. Avoid rolling down windows or cleaning the tinted surface during this period.
- Čištění: Use a soft cloth and a non-abrasive, ammonia-free window cleaner. Spray the cleaner onto the cloth first, then wipe the tinted surface gently.
- Vyhněte se agresivním chemikáliím: Do not use cleaners containing ammonia, alcohol, or other harsh chemicals, as these can damage the film.
- Vyvarujte se brusiva: Do not use abrasive pads, brushes, or tools that could scratch the film.
- Pravidelná kontrola: Periodically check the film for any signs of peeling, bubbling, or damage. Address minor issues promptly to prevent further deterioration.
6. Řešení problémů
Zde jsou některé běžné problémy a jejich možná řešení:
- Bubliny: Small water bubbles are normal immediately after installation and should disappear as the film cures. Larger air bubbles or persistent water bubbles may require re-squeegeeing or professional assistance.
- Peeling Edges: If the film edges begin to peel, it may indicate insufficient cleaning or improper trimming during installation. Re-clean the area and re-apply if possible, or consider professional repair.
- Hazy Appearance: A slight haze is common during the curing process. This should clear up completely once the film is fully dry. Ensure adequate drying time.
- Škrábance: While the film is scratch-resistant, deep scratches can occur from sharp objects. Minor scratches may be less noticeable over time, but significant damage may require film replacement.
7. Záruka a podpora
For warranty information or technical support, please refer to the product packaging or contact Partuto customer service directly. Keep your proof of purchase for any warranty claims.
Kontaktní údaje: Please visit the official Partuto webNejnovější kontaktní údaje naleznete na webových stránkách nebo na stránce podpory vašeho prodejce.