Polibi Extendable Farmhouse Dining Table Set User Manual

1. Úvod

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Polibi 5-Piece Extendable Farmhouse Dining Table Set. Please read all instructions carefully before assembly and use to ensure proper function and longevity of your furniture.

Image 1.1: The Polibi 5-Piece Extendable Farmhouse Dining Table Set in a typical home environment.

2. Bezpečnostní pokyny

• Veškeré montážní příslušenství uchovávejte mimo dosah dětí.
• Před použitím se ujistěte, že jsou všechny šrouby a vruty bezpečně utažené. Pravidelně kontrolujte a v případě potřeby dotahujte.
• Nestůjte ani nesedejte na stole.
• Nepřekračujte nosnost stolu (350 liber) nebo židle (250 liber).
• Use on a level surface to prevent wobbling or tipping.
• Nepokládejte horké předměty přímo na desku stolu bez ochrany.

3. Obsah balení

Před zahájením montáže ověřte, zda jsou přítomny všechny součásti. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

Table Components:

• Tabletop (with removable leaf)
• Nohy stolu (4)
• X-shaped Stretchers (2 sets)
• Sada hardwaru (šrouby, podložky, imbusový klíč)

Chair Components (x4):

• Chair Backrest (1 per chair)
• Chair Seat (1 per chair)
• Front Legs (2 per chair)
• Back Legs (2 per chair)
• Side and Front Stretchers (various per chair)
• Sada hardwaru (šrouby, podložky, imbusový klíč)

4. Nastavení a montáž

Assembly typically requires two adults. Clear a spacious area and lay out all components on a soft, clean surface to prevent scratches.

4.1 Sestavení stolu

1. Attach the table legs to the X-shaped stretchers. Ensure the stretchers are correctly oriented to form a stable base.


Image 4.1.1: Detail of the table's X-shaped stretchers for stability.

2. Opatrně položte desku stolu dnem vzhůru na chráněný povrch.
3. Align the assembled leg and stretcher base with the pre-drilled holes on the underside of the tabletop.


Image 4.1.2: Underside of the table, illustrating leg attachment points.

4. Secure the base to the tabletop using the provided bolts and washers. Tighten all fasteners evenly with the Allen wrench.
5. Opatrně otočte stůl do správné polohy.

4.2 Chair Assembly (Repeat for each of the 4 chairs)

1. Attach the front legs to the chair seat using the provided hardware.
2. Attach the back legs to the chair seat and backrest.
3. Connect the side and front stretchers between the legs to enhance stability.


Image 4.2.1: Details of chair construction, including cushion and frame.

4. Ensure all bolts are tightened securely. Do not overtighten.

5. Operating Instructions: Extending and Retracting the Table Leaf

Your dining table features a removable leaf to adjust its length from 42 inches (round) to 57.7 inches (oval).

5.1 To Extend the Table:

1. Gently pull the two halves of the tabletop apart from the center. The table will slide on its runners.
2. Insert the 15.7-inch removable leaf into the gap created in the center of the table.
3. Push the two tabletop halves back together until they are flush with the leaf and securely locked.


Image 5.1.1: Visual guide for extending the table with the removable leaf.

5.2 To Retract the Table:

1. Pull the two halves of the tabletop apart slightly.
2. Carefully lift and remove the middle leaf. Store the leaf in a safe place to prevent damage.


Image 5.2.1: The table in its compact, round configuration with the leaf removed.

3. Push the two tabletop halves back together until they meet, forming the round table.

6. Údržba

6.1 Wood Surfaces (Table)

• Pravidelně otírejte měkkým hadříkemamp hadříkem. Ihned osušte čistým a suchým hadříkem.
• Avoid using harsh chemicals, abrasive cleaners, or polishes that contain silicone.
• Chraňte před přímým slunečním zářením a extrémními teplotními změnami, abyste zabránili deformaci nebo vyblednutí.
• Use coasters and placemats to protect the surface from spills and heat.

6.2 Upholstered Chairs

• Vacuum regularly with an upholstery attachment to remove dust and debris.
• Spot clean spills immediately with a clean, damp cloth and mild soap. Blot, do not rub.
• Nechte zcela vyschnout na vzduchu.
• Vyhněte se delšímu vystavení přímému slunečnímu záření, aby nedošlo k vyblednutí látky.

7. Řešení problémů

7.1 Table or Chair is Wobbly

• Řešení: Check all bolts and screws. Tighten any loose fasteners. Ensure the furniture is on a level surface.

7.2 Table Leaf Does Not Fit Properly

• Řešení: Ensure the table halves are pulled apart evenly and fully before inserting the leaf. Verify the leaf is oriented correctly. If the issue persists, check for any obstructions in the sliding mechanism.

7.3 Scratches or Minor Damage to Wood

• Řešení: For minor scratches, a wood repair marker or furniture polish designed for birch veneer may be used. Consult a professional for significant damage.

8. Specifikace

Image 8.1: Dimensional drawing of the table and chairs.

9. Záruka a podpora

For warranty information, missing parts, or further assistance, please refer to your purchase documentation or contact Polibi customer support directly. Contact details can typically be found on the retailer's website or within your order history.