sonecesiya Replacement Accessories Kit Instruction Manual

Zavedení

This manual provides detailed instructions for the installation, maintenance, and replacement of components in your sonecesiya Replacement Accessories Kit. This kit is designed to maintain the optimal cleaning performance of your compatible robot vacuum cleaner. Please read these instructions carefully before use.

Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• 2 x Main Brushes
• 8 x Boční kartáče
• 4 x Filters (HEPA)
• 6 x mopové podložky
• 6 x sáčky na prach
• 2 x Mop Cloth Holders

Kompatibilita

This accessory kit is compatible with the following robot vacuum cleaner models:

• Xiaomi X10 Plus
• Mijia Omni 1S B101CN
• Dreame L10s Ultra
• Dreame S10 Pro

Ensure your robot vacuum model matches one of the listed compatible devices before installation.

Pokyny k instalaci

Always power off and unplug your robot vacuum cleaner before attempting any installation or replacement of parts.

1. Instalace hlavního kartáče

1. Otočte robotický vysavač dnem vzhůru.
2. Locate the main brush cover, usually secured by latches or screws.
3. Open or unscrew the cover to access the main brush compartment.
4. Odstraňte starý hlavní kartáč.
5. Insert the new main brush, ensuring the ends align with the slots in the vacuum.
6. Close the main brush cover and secure it.

2. Instalace bočního kartáče

1. Otočte robotický vysavač dnem vzhůru.
2. Locate the side brush(es). They are usually held by a single screw or clip.
3. Unscrew or unclip the old side brush and remove it.
4. Align the new side brush with the post and press it down firmly, or secure it with the screw.

3. Filter (HEPA) Installation

1. Otevřete přihrádku na prach robotického vysavače.
2. Odstraňte popelnici.
3. Locate the filter housing within the dustbin.
4. Vyjměte starý filtr.
5. Insert the new HEPA filter into the housing, ensuring it fits snugly.
6. Reinstall the dustbin into the robot vacuum.

4. Mop Pad Installation

1. Locate the mop cloth holder on your robot vacuum.
2. Attach a clean mop pad to the mop cloth holder. Most mop pads use a hook-and-loop (Velcro-style) fastening system.
3. Ensure the mop pad is securely attached and evenly spread.
4. Install the mop cloth holder with the attached mop pad onto the robot vacuum.

5. Instalace prachového sáčku

1. Open the cleaning station or the dust collection compartment of your robot vacuum (depending on model).
2. Remove the full dust bag.
3. Insert a new dust bag, ensuring it is properly seated and the opening aligns with the vacuum's suction port.
4. Přihrádku bezpečně uzavřete.

Údržba

Regular maintenance of your robot vacuum's accessories ensures optimal performance and extends their lifespan. Always power off and unplug your robot vacuum cleaner before performing maintenance.

1. Main Brush Maintenance

• Frekvence: Clean weekly, replace every 3-6 months depending on usage.
• Čištění: Remove the main brush as per installation instructions. Use the cleaning tool (often provided with the vacuum) to cut and remove tangled hair and debris. Wipe the brush and its bearings with a dry cloth.

2. Údržba bočního kartáče

• Frekvence: Clean monthly, replace every 3-6 months depending on usage.
• Čištění: Remove the side brush. Remove any tangled hair or debris from the bristles and the brush post. If bristles are bent, you can soak them in warm water for a few minutes to help them regain their shape. Ensure they are completely dry before reinstallation.

3. Filter (HEPA) Maintenance

• Frekvence: Clean weekly, replace every 2-3 months depending on usage.
• Čištění: Remove the filter from the dustbin. Gently tap the filter against a trash can to dislodge dust. You can also use a small brush or a vacuum cleaner on a low setting to clean the pleats. Do not wash HEPA filters with water unless explicitly stated by your vacuum's manufacturer.

4. Mop Pad Maintenance

• Frekvence: Wash after each use, replace every 1-3 months depending on usage.
• Čištění: Remove the mop pad from the holder. Hand wash with mild detergent and warm water, or machine wash on a gentle cycle. Air dry completely before reattaching to the mop cloth holder.

5. Dust Bag Maintenance

• Frekvence: Replace when full, typically every 4-8 weeks depending on usage and household debris.
• Nahrazení: Follow the dust bag installation instructions to replace a full bag with a new one. Dust bags are designed for single use and should not be emptied and reused.

Odstraňování problémů

If your robot vacuum cleaner's performance decreases after replacing parts, consider the following:

• Snížené sání: Ensure the HEPA filter is clean and correctly installed. Check the dust bag for fullness and proper seating.
• Poor Sweeping: Verify that side brushes are free of tangles and correctly installed.
• Neúčinné vytírání: Ensure mop pads are clean, damp (if applicable to your model), and securely attached to the holder.
• Neobvyklé zvuky: Check main and side brushes for tangled hair or debris that might be causing obstruction. Ensure all parts are securely installed.
• Kompatibilita: Double-check that the replacement parts are indeed compatible with your specific robot vacuum model as listed in this manual.

For further assistance, refer to your robot vacuum cleaner's original instruction manual or contact the manufacturer's support.

Specifikace

Záruka a podpora

For any questions regarding the installation, maintenance, or performance of your sonecesiya Replacement Accessories Kit, please contact your retailer or the manufacturer directly. Keep your purchase receipt for warranty purposes, if applicable. Specific warranty details may vary by region and retailer.