WORKPRO Steam Portable Carpet and Upholstery Cleaner

Zavedení

This manual provides detailed instructions for the safe and effective operation and maintenance of your WORKPRO Steam Portable Carpet and Upholstery Cleaner. Please read all instructions carefully before use and retain this manual for future reference.

Komponenty produktu

The WORKPRO Steam Portable Carpet and Upholstery Cleaner (Model W125369AE) includes the following components:

• Steam Carpet and Upholstery Cleaner Unit (x1)
• Multi-functional Tool (x1)
• Ironing Brush (x1)
• Window Cleaning Brush (x1)
• Steam Nozzle (x1)
• Držák hadice (x2)
• Držák rukojeti (x1)
• Čisticí hadřík (x1)
• Hadice (x1)
• Multi-fabric Cleaner (x1)
• Odměrka (x1)

Image: All included accessories for the WORKPRO Steam Portable Carpet and Upholstery Cleaner.

Nastavení

1. Připojte hadici: Connect the hose securely to the designated port on the main unit. Ensure it clicks into place.
2. Install Hose Brackets and Handle Holder: Attach the hose brackets and handle holder to the main unit as shown in the diagram for convenient storage and organization.
3. Select and Attach Cleaning Tool: Choose the appropriate cleaning tool (Multi-functional Tool, Ironing Brush, Window Cleaning Brush, or Steam Nozzle) for your task and attach it firmly to the end of the hose.
4. Naplňte nádrž na čistou vodu: Remove the clean water tank. Fill it with water (cold or hot, depending on desired mode). If using the provided Multi-fabric Cleaner, add one capful to the water tank using the measuring cup. Do not exceed the MAX fill line. Reinsert the tank securely.
5. Připojení napájení: Zapojte napájecí kabel do vhodné elektrické zásuvky.

Image: Dual tank design with clean and dirty water tanks, and included multi-fabric cleaner.

Image: Extended hose and power cord for enhanced mobility during cleaning.

Návod k obsluze

The unit features a touch panel for selecting various cleaning modes:

• Cold Water Mode: Pro běžné úklidové práce.
• Režim ohřevu teplé vody: For more stubborn stains, reaching 140.5°F (60.3°C).
• Režim Pouze Steam: For deep sanitization and refreshing surfaces, reaching 216.5°F (102.5°C).
• Steam & Vacuum Mode: Combines deep steam cleaning with dirty water extraction.

Provozovat:

1. Vyberte režim: On the touch panel, select your desired cleaning mode (Cold Water, Hot Water, Steam Only, or Steam & Vacuum).
2. Zapnutí: Stiskněte tlačítko Napájení.
3. Předehřívání: If using Hot Water or Steam modes, allow approximately 30 seconds for the unit to preheat. The indicator light will change when ready.
4. Activate Water/Steam: Press the 'Water/Steam' button on the control panel to begin dispensing water or steam through the attached tool.
5. Čistý povrch: Move the cleaning tool slowly over the surface to be cleaned. For best results, apply gentle pressure.
6. Vypnout: Press the Power button to turn off the unit when finished.

Image: Four versatile cleaning modes for different cleaning needs.

Image: Fast steam heating for efficient cleaning.

Údržba

Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho vysavače.

• Vyprázdněte a vyčistěte nádrž na špinavou vodu: Po každém použití vyjměte nádržku na špinavou vodu a vyprázdněte její obsah. Nádržku důkladně opláchněte čistou vodou.
• Čisté přílohy: Detach all cleaning tools and rinse them under running water. Ensure no debris is left in the nozzles or brushes.
• Otřete jednotku: Otřete vnější povrch hlavní jednotky čisticím prostředkem.amp tkanina.
• Úložný prostor pro kabel: Wrap the power cord neatly around the designated storage hooks.
• Péče o produkt: Hand wash all removable components as needed.

Image: Emptying the dirty water tank after use.

Odstraňování problémů

If you encounter issues with your WORKPRO Steam Portable Carpet and Upholstery Cleaner, refer to the following common solutions:

• Warning Light On / Machine Stops Working: This often indicates an issue with the water tanks.
1. No water in the clean water tank: Ensure the clean water tank is filled to the appropriate level.
2. Dirty water tank exceeds MAX line: Empty and clean the dirty water tank. The machine will automatically stop if the dirty water reaches the maximum level.
3. Dirty water tank electrodes covered with dirt or debris: Remove the dirty water tank, clean the electrodes, and wipe them dry.
• No Steam/Water Dispensing: Ensure the unit is properly plugged in, the correct mode is selected, and the 'Water/Steam' button is pressed. Allow sufficient preheating time for hot water/steam modes.
• Snížené sání: Check if the dirty water tank is full or if there are any blockages in the hose or cleaning tool.

Specifikace

Bezpečnostní informace

• Empty the dirty water tank before exceeding the MAX line to ensure normal use. The spot cleaner will automatically stop when the water reaches the Max level.
• Nemiřte parní tryskou na lidi nebo zvířata.
• Keep the brush head facing downward during use to prevent burns.
• Avoid directing steam or liquids at devices with electrical components.