GDFStudio Classic Retro Console Table

GDFStudio Classic Retro Console Table - Instruction Manual

Model: Classic Retro Console Table (Gray Wash)

1. Nastavení a montáž

This console table requires minimal assembly. Please follow the steps below to ensure proper setup.

1.1 Obsah balení

Before beginning, verify that all components are present:

  • Tabletop with pre-assembled drawers
  • 4 x Conical Legs
  • 1 x Bottom Shelf
  • Sada hardwaru (šrouby, imbusový klíč)

1.2 Montážní kroky

  1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a položte je na čistý, měkký povrch, abyste zabránili poškrábání.
  2. Připevnění nohou k desce stolu: Align the conical legs with the pre-drilled holes on the underside of the tabletop. Secure each leg using the provided screws and Allen wrench. Do not overtighten.
  3. Připevnění spodní police: Position the bottom shelf between the lower sections of the legs. Align the holes on the shelf with the corresponding holes on the legs. Secure the shelf using the remaining screws.
  4. Utáhněte všechna spojení: Once all parts are in place, gently tighten all screws to ensure stability. Avoid excessive force.
  5. Umístění stolu: Carefully lift the assembled table and place it in its desired location.
Assembled GDFStudio Classic Retro Console Table in Gray Wash

Figure 1: Fully assembled GDFStudio Classic Retro Console Table.

2. Použití produktu

The GDFStudio Classic Retro Console Table is designed for indoor use as an entryway table, sofa table, or general display and storage unit.

2.1 Skladování a zobrazení

  • Zásuvky: The table features three drawers (one large center drawer, two smaller side drawers) for organizing smaller items. Each drawer has a weight capacity of 17 lbs.
  • Open Bottom Shelf: The spacious lower shelf provides additional storage or display space for books, decorative baskets, or other items. The bottom shelf has a weight capacity of 66 lbs.
  • Stolní deska: The main tabletop surface is suitable for lamps, decorative items, and other household essentials. The tabletop has a maximum weight capacity of 220 lbs.
GDFStudio console table with items on tabletop and shelf

Figure 2: Console table demonstrating storage and display capabilities.

2.2 Aspekty umístění

  • Umístěte stůl na rovný povrch, aby se nekýval.
  • Avoid placing the table in direct sunlight or near heat sources to prevent material damage or discoloration.
  • Tento výrobek je určen pouze pro vnitřní použití.

3. Péče a údržba

Správná péče pomůže udržet vzhled a dlouhou životnost vašeho konzolového stolku.

  • Čištění: Otřete povrch měkkým, lehce vlhkým hadříkem.amp hadříkem. Ihned osušte čistým a suchým hadříkem.
  • Vyhněte se agresivním chemikáliím: Do not use abrasive cleaners, strong detergents, or polishes containing silicone, as these can damage the finish.
  • Rozlití: Rozlité tekutiny ihned setřete, abyste zabránili vzniku skvrn nebo poškození vodou.
  • Ochrana: Use coasters under drinks and protective pads under hot items or objects that may scratch the surface.
  • Kontrola hardwaru: Pravidelně kontrolujte a utahujte veškeré montážní prvky, aby stůl zůstal stabilní.

4. Řešení problémů

Pokud narazíte na jakékoli problémy s konzolovým stolem, podívejte se na následující běžná řešení:

  • Vrátivý stůl: Ensure the table is on a level surface. Check all leg and shelf connections and tighten any loose screws.
  • Zásuvky se neposouvají hladce: Open the drawer completely and inspect the runners for any obstructions or debris. Clean the runners if necessary. Ensure the drawer is properly aligned within its tracks.
  • Minor Scratches or Dents: For small imperfections, furniture touch-up pens or waxes matching the gray wash finish may be used. Test in an inconspicuous area first.

5. Specifikace produktu

FunkceDetail
ZnačkaGDFStudio
ModelClassic Retro Console Table
BarvaGray Wash
Rozměry produktu (D x Š x V)50 cm x 15 cm x 30.2 cm
Hmotnost položky42 libry
Nosnost stolu220 libry
Nosnost zásuvky (každá)17 libry
Nosnost spodní police66 libry
Materiál rámuPine Wood, MDF Board
Typ horního materiáluDřevo
Počet zásuvek3
Montáž VyžadovánaAno
Vnitřní/venkovní použitíKrytý
Detailed dimensions of the GDFStudio Classic Retro Console Table

Figure 3: Detailed dimensions of the console table, including drawer and shelf measurements.

6. Záruka a podpora

6.1 Informace o záruce

Specific warranty details for this product are not provided in the available information. For warranty inquiries, please contact GDFStudio directly or the retailer from whom the product was purchased.

6.2 Zákaznická podpora

If you have any questions, require assistance with assembly, or need to report damaged or missing parts, please contact GDFStudio customer service or the seller. Please have your purchase details and model number (Classic Retro Console Table, B0F6BPM6PN) ready when contacting support.

© 2026 GDFStudio. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.