Zavedení
Thank you for choosing the BLACK+DECKER Wi-Fi Water Leak Sensor. This device provides smart, real-time water leak detection to help protect your home from potential water damage. By connecting to your home's Wi-Fi network, the sensor alerts you via a built-in alarm and smartphone notifications, ensuring you are informed even when away from home.
Klíčové vlastnosti:
- Smart Leak Detection: Instantly detects water with a 46-inch sump pump probe.
- Okamžitá upozornění: Sends real-time notifications to your smartphone or email via the Black+Decker Home App.
- Vestavěný alarm: Provides an audible alert at the sensor location.
- Snadná instalace: Plug-and-play setup with no hub required, includes wall mounting hardware.
- Vzdálený dohled: Manage and monitor the sensor remotely using the free Black+Decker Home App (iOS and Android compatible).
- Napájení z baterie: Operates on two AAA batteries (not included) for flexible placement.
Důležité bezpečnostní informace
Please read all instructions carefully before using this product. Failure to follow these instructions may result in product damage, property damage, or injury.
- Toto zařízení je určeno pouze pro vnitřní použití.
- Do not immerse the main sensor unit in water. The probe is designed for water contact, but the main unit is not waterproof.
- Use only the specified battery type (2 AAA batteries). Do not mix old and new batteries, or different types of batteries.
- Zlikvidujte baterie v souladu s místními předpisy.
- Chraňte zařízení před přímým slunečním zářením, zdroji tepla a extrémními teplotami.
- Ensure the Wi-Fi signal is strong in the installation area for reliable operation.
Obsah balení
Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:
- BLACK+DECKER Wi-Fi Water Leak Sensor (Main Unit)
- 46-inch Sump Pump Probe
- Montážní materiál pro stěnu (šrouby a hmoždinky)
- Návod k použití (tento dokument)
Obrázek: Přední strana view of the BLACK+DECKER Wi-Fi Water Leak Sensor product box, showing the main sensor unit and the Wi-Fi logo.
Konec produktuview
Familiarize yourself with the components of your BLACK+DECKER Wi-Fi Water Leak Sensor.
Obrázek: Shora dolů view of the BLACK+DECKER Wi-Fi Water Leak Sensor, showing the main circular unit connected to the smaller circular water sensing probe via a coiled white cable.
Obrázek: Detailní záběr shora view of the main BLACK+DECKER Wi-Fi Water Leak Sensor unit, showing the BLACK+DECKER logo and a small indicator light.
Hlavní komponenty:
- Hlavní senzorová jednotka: Houses the Wi-Fi module, alarm, and battery compartment.
- Water Sensing Probe: The 46-inch cable with a small disc at the end, designed to detect water contact.
- Kontrolka: Provides status feedback (e.g., pairing mode, low battery).
- Montážní úchytky: Located on the main unit for wall installation.
Nastavení a instalace
1. Insert Batteries
- Gently twist the back cover of the main sensor unit counter-clockwise to open the battery compartment.
- Insert two (2) new AAA batteries (not included), ensuring correct polarity (+/-).
- Nasaďte zpět zadní kryt tak, že zarovnáte značky a otočíte jím ve směru hodinových ručiček, dokud se nezajistí.
2. Download the BLACK+DECKER Home App
The BLACK+DECKER Home App is required for setup and remote monitoring.
- Hledat "Black+Decker Home" in the Apple App Store (for iOS devices) or Google Play Store (for Android devices).
- Stáhněte a nainstalujte aplikaci.
- Postupujte podle pokynů v aplikaci a vytvořte si účet nebo se přihlaste.
3. Připojte se k Wi-Fi
Follow the on-screen instructions within the BLACK+DECKER Home App to pair your sensor with your home Wi-Fi network. Ensure your smartphone is connected to a 2.4 GHz Wi-Fi network during the pairing process.
- Open the Black+Decker Home App and select "Add Device" or the '+' icon.
- Choose the "Water Leak Sensor" from the list of devices.
- Follow the app's prompts to put the sensor into pairing mode (usually by pressing and holding a button on the sensor until the indicator light flashes).
- Enter your Wi-Fi network name and password when prompted by the app.
- Wait for the sensor to connect. The indicator light will change to a solid color once connected.
4. Montáž senzoru
Choose a location prone to water leaks, such as near a water heater, dishwasher, washing machine, or sump pump. The main unit should be mounted above the potential water level, with the probe placed on the floor or in the area where water might accumulate.
- Umístění: Position the main sensor unit on a wall or vertical surface using the included mounting hardware. Ensure the probe cable can reach the desired detection area.
- Umístění sondy: Place the small water sensing probe directly on the floor or in the lowest point of the area where water leaks are most likely to occur. The 46-inch cable provides flexibility for placement.
- Test: After installation, you may test the sensor by placing a small amount of water on the probe to confirm it triggers an alarm and sends a notification.
Image: The BLACK+DECKER Wi-Fi Water Leak Sensor main unit mounted on a wall near a water heater, with its probe placed on the floor where a small water puddle is simulated, triggering a red alert glow.
Image: The BLACK+DECKER Wi-Fi Water Leak Sensor main unit mounted on the side of a kitchen cabinet next to an open dishwasher, with its probe positioned on the floor.
Návod k obsluze
Detekce úniku
Once installed and connected, the sensor continuously monitors for water. When the probe detects water, it will:
- Trigger an audible alarm from the main sensor unit.
- Send an instant notification to your smartphone via the Black+Decker Home App.
- Send an email notification (if configured in the app).
To silence the alarm, remove the probe from the water. The app notification will remain until acknowledged.
Funkce aplikace
The Black+Decker Home App allows you to:
- View the current status of your leak sensor (e.g., online, offline, no leak detected).
- Receive and review leak alerts.
- Customize notification settings (e.g., push notifications, email alerts).
- Zkontrolujte stav baterie.
- Manage multiple BLACK+DECKER smart devices.
Údržba
Výměna baterie
The sensor operates on two AAA batteries. When the battery level is low, you will receive a notification via the app, and the sensor's indicator light may flash a specific color (refer to app for details).
- Gently twist the back cover of the main sensor unit counter-clockwise to open the battery compartment.
- Vyjměte staré baterie.
- Vložte dvě (2) nové baterie AAA a dbejte na správnou polaritu (+/-).
- Nasaďte zpět zadní kryt tak, že zarovnáte značky a otočíte jím ve směru hodinových ručiček, dokud se nezajistí.
- Staré baterie zlikvidujte zodpovědně v souladu s místními předpisy.
Čištění
To ensure optimal performance, keep the sensor and probe clean.
- Wipe the main sensor unit and probe with a soft, dry cloth.
- Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani agresivní chemikálie.
- Ensure the probe's contact points are free from dirt or debris.
Odstraňování problémů
If you encounter issues with your BLACK+DECKER Wi-Fi Water Leak Sensor, refer to the table below for common problems and solutions.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Sensor not connecting to Wi-Fi | Incorrect Wi-Fi password; Sensor too far from router; Router on 5 GHz band; Weak Wi-Fi signal. | Verify Wi-Fi password; Move sensor closer to router; Ensure router is broadcasting 2.4 GHz Wi-Fi; Check Wi-Fi signal strength in the app. |
| Nebyla přijata žádná oznámení | App notifications disabled; Email not configured; Sensor offline; App not running in background. | Check app notification settings; Configure email alerts in the app; Verify sensor is online; Ensure app has background refresh permissions. |
| Sensor alarm not sounding | Low battery; Speaker obstructed; Sensor not detecting water. | Replace batteries; Ensure speaker is clear; Test probe with water to confirm detection. |
| Falešné poplachy | Probe in contact with moisture/condensation; Dirty probe contacts. | Relocate probe to a drier spot; Clean probe contacts with a dry cloth. |
| Krátká výdrž baterie | Frequent alarms; Poor Wi-Fi signal requiring more power; Old/low-quality batteries. | Ensure sensor is not frequently triggered; Improve Wi-Fi signal; Use high-quality alkaline batteries. |
Specifikace
Image: Technical drawing showing the dimensions of the BLACK+DECKER Wi-Fi Water Leak Sensor main unit (3 1/8 inches / 80 mm diameter) and the probe (1 1/8 inches / 29 mm diameter), with a 51 1/8 inches / 1300 mm cable length.
| Číslo modelu | BXSPBAFLOOD1 |
| Zdroj napájení | 2 x AAA baterie (nejsou součástí balení) |
| svtage | 3 V (DC) |
| Konektivita | Wi-Fi (pouze 2.4 GHz) |
| Kontrolní metoda | Black+Decker Home App |
| technologie Sensor | Kontaktní senzor |
| Délka sondy | 46 palců (přibližně 117 cm) |
| Typ montáže | Držák na zeď |
| Rozměry produktu (hlavní jednotka) | 3 x 1.13 x 3.13 palců (přibližně 7.6 x 2.9 x 8 cm) |
| Hmotnost položky | 3.87 unce (cca 110 gramů) |
| Provozní teplota | 0 °C až 40 °C (32 °F až 104 °F) |
| Vlhkost | 10% až 90% RH (bez kondenzace) |
Záruka a zákaznická podpora
This BLACK+DECKER Wi-Fi Water Leak Sensor is backed by a 1letá omezená záruka od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání. Nevztahuje se na škody způsobené nesprávným použitím, nehodou, úpravou nebo neoprávněnou opravou.
For warranty claims, technical assistance, or customer support, please contact BLACK+DECKER customer service. Refer to the contact information provided on the product packaging or the official BLACK+DECKER webweb s nejaktuálnějšími informacemi o podpoře.
Online podpora: Návštěva www.blackanddecker.com/support