Uživatelská příručka pro hnětací hák s potahem K5ADH 5 QT

1. Konec produktuview

This manual provides essential information for the installation, operation, and maintenance of the K5ADH 5 QT Coated Dough Hook. This high-quality replacement part is designed to fit various 5-quart stand mixers from brands such as Whirlpool and KitchenAid, ensuring reliable performance for your kneading needs.

The K5ADH dough hook is specifically engineered for mixing and kneading yeast doughs, such as bread, pizza, and pasta dough, efficiently and thoroughly.

2. Důležité bezpečnostní informace

• Always unplug the stand mixer before attaching or removing the dough hook.
• Ensure the mixer is turned off and the speed control is set to "OFF" before handling attachments.
• Keep hands, hair, and loose clothing away from moving parts during mixer operation.
• Do not operate the mixer with a damaged dough hook. Inspect the hook for any signs of wear or damage before each use.
• This dough hook is designed for specific 5-quart stand mixer models. Verify compatibility before use to prevent damage to the mixer or attachment.

3. Nastavení a instalace

Follow these steps to properly install the K5ADH dough hook onto your stand mixer:

1. Příprava: Ensure your stand mixer is unplugged and turned off. Lift the mixer head (if applicable) or tilt it back to access the attachment hub.
2. Identify the Dough Hook: The K5ADH dough hook is a C-shaped or spiral-shaped attachment, typically coated for non-stick properties.


Obrázek 3.1: Přední strana view of the K5ADH 5 QT Coated Dough Hook, showing its C-shape and white coating.

3. Připojte háček: Align the shaft of the dough hook with the attachment shaft on your mixer. Push the hook upwards onto the shaft, then rotate it counter-clockwise until it locks into place. You should feel a slight click or resistance indicating it's securely fastened.

Obrázek 3.2: Spodní strana view of the K5ADH Dough Hook, highlighting the attachment point designed to fit the mixer's shaft.
4. Ověření zabezpečení: Gently pull down on the dough hook to ensure it is firmly attached and will not detach during operation.
5. Spodní míchací hlava: If you lifted or tilted the mixer head, return it to the operating position and secure it.

4. Návod k obsluze

Once the K5ADH dough hook is securely installed, you can begin mixing. Refer to your stand mixer's original instruction manual for specific speed settings and mixing times for various dough types.

• Přidání ingrediencí: Place all dry and wet ingredients into the mixing bowl before lowering the mixer head or attaching the bowl.
• Spuštění mixéru: Plug in the mixer. Start at a low speed (e.g., Speed 2 for KitchenAid mixers) to combine ingredients, then gradually increase to the recommended speed for kneading.
• Proces hnětení: The dough hook is designed to pull, stretch, and fold dough, developing gluten for optimal texture. Knead for the duration specified in your recipe.
• Zastavení mixéru: Always turn the mixer off and unplug it before scraping down the bowl or removing the dough hook.

5. Údržba a péče

Proper care will extend the life of your K5ADH dough hook.

• Čištění: After each use, remove the dough hook from the mixer. Wash it immediately with warm, soapy water. The coated surface is generally easy to clean.
• Bezpečnost myčky nádobí: While some coated attachments are dishwasher safe, hand washing is recommended to preserve the coating and extend the life of the hook. Avoid abrasive cleaners or scouring pads that could damage the coating.
• Sušení: Thoroughly dry the dough hook before storing to prevent water spots or potential corrosion on the metal shaft.
• Skladování: Store the dough hook in a dry place, preferably with your mixer attachments, to prevent damage.

6. Řešení problémů

If you encounter issues with your K5ADH dough hook, consider the following:

• Hook Not Attaching Securely:
  • Ujistěte se, že je mixér odpojený.
  • Verify that the dough hook is correctly aligned with the mixer's attachment shaft and rotated fully into place.
  • Check for any debris or dough residue in the attachment hub or on the hook's shaft that might prevent a secure fit.
• Těsto se špatně míchá:
  • Ensure the dough hook is the correct size (5 QT) for your mixer bowl.
  • Check that the mixer's bowl is properly seated and locked into place.
  • Adjust the mixer's speed according to your recipe and the type of dough.
• Neobvyklý hluk během provozu:
  • Turn off and unplug the mixer immediately.
  • Inspect the dough hook and mixer for any obstructions or signs of damage.
  • Ensure the dough hook is securely attached and not wobbling.

7. Specifikace

8. Záruka a podpora

Information regarding specific warranty coverage for this replacement part is not provided in the product details. For any support or warranty inquiries, please refer to the retailer or manufacturer from whom you purchased this item.

Always retain your proof of purchase for any potential claims.